From: Heiner Kallweit Date: Wed, 27 Mar 2019 20:59:33 +0000 (+0100) Subject: net: phy: use genphy_read_abilities in genphy driver X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2a4d8674b8ec1fc0cf91a4d59b0ca119052036ce;p=openwrt%2Fstaging%2Fblogic.git net: phy: use genphy_read_abilities in genphy driver Currently the genphy driver populates phydev->supported like this: First all possible feature bits are set, then genphy_config_init() reads the available features from the chip and remove all unsupported features from phydev->supported. This can be simplified by using genphy_read_abilities(). Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 0af66f32d363..67fc581e3598 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -2284,8 +2284,7 @@ static struct phy_driver genphy_driver = { .phy_id_mask = 0xffffffff, .name = "Generic PHY", .soft_reset = genphy_no_soft_reset, - .config_init = genphy_config_init, - .features = PHY_GBIT_ALL_PORTS_FEATURES, + .get_features = genphy_read_abilities, .aneg_done = genphy_aneg_done, .suspend = genphy_suspend, .resume = genphy_resume,