From: Branislav Radocaj Date: Mon, 11 Dec 2017 23:13:38 +0000 (+0100) Subject: net: ethernet: arc: fix error handling in emac_rockchip_probe X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2a9ee696c72a24d63529c76483fcd92d04b1d2b7;p=openwrt%2Fstaging%2Fblogic.git net: ethernet: arc: fix error handling in emac_rockchip_probe If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Changes since v2 [1]: * Merged with latest code changes Changes since v1: Update made thanks to David's review, much appreciated David. * Improved inconsistent failure handling of clock rate setting * For completeness of usecase, added arc_emac_probe error handling Signed-off-by: Branislav Radocaj Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c index c6163874e4e7..16f9bee992fe 100644 --- a/drivers/net/ethernet/arc/emac_rockchip.c +++ b/drivers/net/ethernet/arc/emac_rockchip.c @@ -199,9 +199,11 @@ static int emac_rockchip_probe(struct platform_device *pdev) /* RMII interface needs always a rate of 50MHz */ err = clk_set_rate(priv->refclk, 50000000); - if (err) + if (err) { dev_err(dev, "failed to change reference clock rate (%d)\n", err); + goto out_regulator_disable; + } if (priv->soc_data->need_div_macclk) { priv->macclk = devm_clk_get(dev, "macclk"); @@ -230,12 +232,14 @@ static int emac_rockchip_probe(struct platform_device *pdev) err = arc_emac_probe(ndev, interface); if (err) { dev_err(dev, "failed to probe arc emac (%d)\n", err); - goto out_regulator_disable; + goto out_clk_disable_macclk; } return 0; + out_clk_disable_macclk: - clk_disable_unprepare(priv->macclk); + if (priv->soc_data->need_div_macclk) + clk_disable_unprepare(priv->macclk); out_regulator_disable: if (priv->regulator) regulator_disable(priv->regulator);