From: Andrew Lunn Date: Wed, 9 Dec 2015 18:39:03 +0000 (+0100) Subject: Doc: Micrel-ksz90x1.txt: Document deprecated MAC OF properties X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2ad7b7560fd586a8b72eb52df9483c203943eec9;p=openwrt%2Fstaging%2Fblogic.git Doc: Micrel-ksz90x1.txt: Document deprecated MAC OF properties Phy properties are expected to be found in the PHY OF node. However this Micrel driver also allows them to be placed into the MAC OF node. This is deprecated. Document it as such, and remove the example using the deprecated method to prevent people copying it into new device tree files. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt index 692076fda0e5..f9c32adab5c6 100644 --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -1,8 +1,9 @@ Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY -Some boards require special tuning values, particularly when it comes to -clock delays. You can specify clock delay values by adding -micrel-specific properties to an Ethernet OF device node. +Some boards require special tuning values, particularly when it comes +to clock delays. You can specify clock delay values in the PHY OF +device node. Deprecated, but still supported, these properties can +also be added to an Ethernet OF device node. Note that these settings are applied after any phy-specific fixup from phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c), @@ -57,16 +58,6 @@ KSZ9031: Examples: - /* Attach to an Ethernet device with autodetected PHY */ - &enet { - rxc-skew-ps = <3000>; - rxdv-skew-ps = <0>; - txc-skew-ps = <3000>; - txen-skew-ps = <0>; - status = "okay"; - }; - - /* Attach to an explicitly-specified PHY */ mdio { phy0: ethernet-phy@0 { rxc-skew-ps = <3000>;