From: David Ahern Date: Wed, 8 Feb 2017 17:29:00 +0000 (-0800) Subject: lwtunnel: valid encap attr check should return 0 when lwtunnel is disabled X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2bd137de531367fb573d90150d1872cb2a2095f7;p=openwrt%2Fstaging%2Fblogic.git lwtunnel: valid encap attr check should return 0 when lwtunnel is disabled An error was reported upgrading to 4.9.8: root@Typhoon:~# ip route add default table 210 nexthop dev eth0 via 10.68.64.1 weight 1 nexthop dev eth0 via 10.68.64.2 weight 1 RTNETLINK answers: Operation not supported The problem occurs when CONFIG_LWTUNNEL is not enabled and a multipath route is submitted. The point of lwtunnel_valid_encap_type_attr is catch modules that need to be loaded before any references are taken with rntl held. With CONFIG_LWTUNNEL disabled, there will be no modules to load so the lwtunnel_valid_encap_type_attr stub should just return 0. Fixes: 9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules") Reported-by: pupilla@libero.it Signed-off-by: David Ahern Signed-off-by: David S. Miller --- diff --git a/include/net/lwtunnel.h b/include/net/lwtunnel.h index 73dd87647460..0388b9c5f5e2 100644 --- a/include/net/lwtunnel.h +++ b/include/net/lwtunnel.h @@ -178,7 +178,10 @@ static inline int lwtunnel_valid_encap_type(u16 encap_type) } static inline int lwtunnel_valid_encap_type_attr(struct nlattr *attr, int len) { - return -EOPNOTSUPP; + /* return 0 since we are not walking attr looking for + * RTA_ENCAP_TYPE attribute on nexthops. + */ + return 0; } static inline int lwtunnel_build_state(struct net_device *dev, u16 encap_type,