From: Joonyoung Shim Date: Fri, 10 Sep 2010 16:36:39 +0000 (+0200) Subject: mfd: Add MAX8998 interrupts support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2c7e6f5797140b33ec2b967ff28941e1c7eff4b2;p=openwrt%2Fstaging%2Fblogic.git mfd: Add MAX8998 interrupts support Use genirq and provide seperated file for interrupts support. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 02cd6c0e59cb..8a463e6c22a0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -295,7 +295,7 @@ config MFD_MAX8925 config MFD_MAX8998 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE help Say yes here to support for Maxim Semiconductor MAX8998 and diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index feaeeaeeddb7..b1ad74da2351 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -58,7 +58,7 @@ obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o obj-$(CONFIG_PMIC_DA903X) += da903x.o max8925-objs := max8925-core.o max8925-i2c.o obj-$(CONFIG_MFD_MAX8925) += max8925.o -obj-$(CONFIG_MFD_MAX8998) += max8998.o +obj-$(CONFIG_MFD_MAX8998) += max8998.o max8998-irq.o pcf50633-objs := pcf50633-core.o pcf50633-irq.o obj-$(CONFIG_MFD_PCF50633) += pcf50633.o diff --git a/drivers/mfd/max8998-irq.c b/drivers/mfd/max8998-irq.c new file mode 100644 index 000000000000..346fd296cf7d --- /dev/null +++ b/drivers/mfd/max8998-irq.c @@ -0,0 +1,255 @@ +/* + * Interrupt controller support for MAX8998 + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include + +struct max8998_irq_data { + int reg; + int mask; +}; + +static struct max8998_irq_data max8998_irqs[] = { + [MAX8998_IRQ_DCINF] = { + .reg = 1, + .mask = MAX8998_IRQ_DCINF_MASK, + }, + [MAX8998_IRQ_DCINR] = { + .reg = 1, + .mask = MAX8998_IRQ_DCINR_MASK, + }, + [MAX8998_IRQ_JIGF] = { + .reg = 1, + .mask = MAX8998_IRQ_JIGF_MASK, + }, + [MAX8998_IRQ_JIGR] = { + .reg = 1, + .mask = MAX8998_IRQ_JIGR_MASK, + }, + [MAX8998_IRQ_PWRONF] = { + .reg = 1, + .mask = MAX8998_IRQ_PWRONF_MASK, + }, + [MAX8998_IRQ_PWRONR] = { + .reg = 1, + .mask = MAX8998_IRQ_PWRONR_MASK, + }, + [MAX8998_IRQ_WTSREVNT] = { + .reg = 2, + .mask = MAX8998_IRQ_WTSREVNT_MASK, + }, + [MAX8998_IRQ_SMPLEVNT] = { + .reg = 2, + .mask = MAX8998_IRQ_SMPLEVNT_MASK, + }, + [MAX8998_IRQ_ALARM1] = { + .reg = 2, + .mask = MAX8998_IRQ_ALARM1_MASK, + }, + [MAX8998_IRQ_ALARM0] = { + .reg = 2, + .mask = MAX8998_IRQ_ALARM0_MASK, + }, + [MAX8998_IRQ_ONKEY1S] = { + .reg = 3, + .mask = MAX8998_IRQ_ONKEY1S_MASK, + }, + [MAX8998_IRQ_TOPOFFR] = { + .reg = 3, + .mask = MAX8998_IRQ_TOPOFFR_MASK, + }, + [MAX8998_IRQ_DCINOVPR] = { + .reg = 3, + .mask = MAX8998_IRQ_DCINOVPR_MASK, + }, + [MAX8998_IRQ_CHGRSTF] = { + .reg = 3, + .mask = MAX8998_IRQ_CHGRSTF_MASK, + }, + [MAX8998_IRQ_DONER] = { + .reg = 3, + .mask = MAX8998_IRQ_DONER_MASK, + }, + [MAX8998_IRQ_CHGFAULT] = { + .reg = 3, + .mask = MAX8998_IRQ_CHGFAULT_MASK, + }, + [MAX8998_IRQ_LOBAT1] = { + .reg = 4, + .mask = MAX8998_IRQ_LOBAT1_MASK, + }, + [MAX8998_IRQ_LOBAT2] = { + .reg = 4, + .mask = MAX8998_IRQ_LOBAT2_MASK, + }, +}; + +static inline struct max8998_irq_data * +irq_to_max8998_irq(struct max8998_dev *max8998, int irq) +{ + return &max8998_irqs[irq - max8998->irq_base]; +} + +static void max8998_irq_lock(unsigned int irq) +{ + struct max8998_dev *max8998 = get_irq_chip_data(irq); + + mutex_lock(&max8998->irqlock); +} + +static void max8998_irq_sync_unlock(unsigned int irq) +{ + struct max8998_dev *max8998 = get_irq_chip_data(irq); + int i; + + for (i = 0; i < ARRAY_SIZE(max8998->irq_masks_cur); i++) { + /* + * If there's been a change in the mask write it back + * to the hardware. + */ + if (max8998->irq_masks_cur[i] != max8998->irq_masks_cache[i]) { + max8998->irq_masks_cache[i] = max8998->irq_masks_cur[i]; + max8998_write_reg(max8998->i2c, MAX8998_REG_IRQM1 + i, + max8998->irq_masks_cur[i]); + } + } + + mutex_unlock(&max8998->irqlock); +} + +static void max8998_irq_unmask(unsigned int irq) +{ + struct max8998_dev *max8998 = get_irq_chip_data(irq); + struct max8998_irq_data *irq_data = irq_to_max8998_irq(max8998, irq); + + max8998->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask; +} + +static void max8998_irq_mask(unsigned int irq) +{ + struct max8998_dev *max8998 = get_irq_chip_data(irq); + struct max8998_irq_data *irq_data = irq_to_max8998_irq(max8998, irq); + + max8998->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask; +} + +static struct irq_chip max8998_irq_chip = { + .name = "max8998", + .bus_lock = max8998_irq_lock, + .bus_sync_unlock = max8998_irq_sync_unlock, + .mask = max8998_irq_mask, + .unmask = max8998_irq_unmask, +}; + +static irqreturn_t max8998_irq_thread(int irq, void *data) +{ + struct max8998_dev *max8998 = data; + u8 irq_reg[MAX8998_NUM_IRQ_REGS]; + int ret; + int i; + + ret = max8998_bulk_read(max8998->i2c, MAX8998_REG_IRQ1, + MAX8998_NUM_IRQ_REGS, irq_reg); + if (ret < 0) { + dev_err(max8998->dev, "Failed to read interrupt register: %d\n", + ret); + return IRQ_NONE; + } + + /* Apply masking */ + for (i = 0; i < MAX8998_NUM_IRQ_REGS; i++) + irq_reg[i] &= ~max8998->irq_masks_cur[i]; + + /* Report */ + for (i = 0; i < MAX8998_IRQ_NR; i++) { + if (irq_reg[max8998_irqs[i].reg - 1] & max8998_irqs[i].mask) + handle_nested_irq(max8998->irq_base + i); + } + + return IRQ_HANDLED; +} + +int max8998_irq_init(struct max8998_dev *max8998) +{ + int i; + int cur_irq; + int ret; + + if (!max8998->irq) { + dev_warn(max8998->dev, + "No interrupt specified, no interrupts\n"); + max8998->irq_base = 0; + return 0; + } + + if (!max8998->irq_base) { + dev_err(max8998->dev, + "No interrupt base specified, no interrupts\n"); + return 0; + } + + mutex_init(&max8998->irqlock); + + /* Mask the individual interrupt sources */ + for (i = 0; i < MAX8998_NUM_IRQ_REGS; i++) { + max8998->irq_masks_cur[i] = 0xff; + max8998->irq_masks_cache[i] = 0xff; + max8998_write_reg(max8998->i2c, MAX8998_REG_IRQM1 + i, 0xff); + } + + max8998_write_reg(max8998->i2c, MAX8998_REG_STATUSM1, 0xff); + max8998_write_reg(max8998->i2c, MAX8998_REG_STATUSM2, 0xff); + + /* register with genirq */ + for (i = 0; i < MAX8998_IRQ_NR; i++) { + cur_irq = i + max8998->irq_base; + set_irq_chip_data(cur_irq, max8998); + set_irq_chip_and_handler(cur_irq, &max8998_irq_chip, + handle_edge_irq); + set_irq_nested_thread(cur_irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(cur_irq, IRQF_VALID); +#else + set_irq_noprobe(cur_irq); +#endif + } + + ret = request_threaded_irq(max8998->irq, NULL, max8998_irq_thread, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "max8998-irq", max8998); + if (ret) { + dev_err(max8998->dev, "Failed to request IRQ %d: %d\n", + max8998->irq, ret); + return ret; + } + + if (!max8998->ono) + return 0; + + ret = request_threaded_irq(max8998->ono, NULL, max8998_irq_thread, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | + IRQF_ONESHOT, "max8998-ono", max8998); + if (ret) + dev_err(max8998->dev, "Failed to request IRQ %d: %d\n", + max8998->ono, ret); + + return 0; +} + +void max8998_irq_exit(struct max8998_dev *max8998) +{ + if (max8998->irq) + free_irq(max8998->irq, max8998); +} diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index 3b8a5076d351..49c140a78ba9 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -1,5 +1,5 @@ /* - * max8698.c - mfd core driver for the Maxim 8998 + * max8998.c - mfd core driver for the Maxim 8998 * * Copyright (C) 2009-2010 Samsung Electronics * Kyungmin Park @@ -53,6 +53,21 @@ int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest) } EXPORT_SYMBOL(max8998_read_reg); +int max8998_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf) +{ + struct max8998_dev *max8998 = i2c_get_clientdata(i2c); + int ret; + + mutex_lock(&max8998->iolock); + ret = i2c_smbus_read_i2c_block_data(i2c, reg, count, buf); + mutex_unlock(&max8998->iolock); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(max8998_bulk_read); + int max8998_write_reg(struct i2c_client *i2c, u8 reg, u8 value) { struct max8998_dev *max8998 = i2c_get_clientdata(i2c); @@ -87,6 +102,7 @@ EXPORT_SYMBOL(max8998_update_reg); static int max8998_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + struct max8998_platform_data *pdata = i2c->dev.platform_data; struct max8998_dev *max8998; int ret = 0; @@ -97,8 +113,15 @@ static int max8998_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, max8998); max8998->dev = &i2c->dev; max8998->i2c = i2c; + max8998->irq = i2c->irq; + if (pdata) { + max8998->ono = pdata->ono; + max8998->irq_base = pdata->irq_base; + } mutex_init(&max8998->iolock); + max8998_irq_init(max8998); + ret = mfd_add_devices(max8998->dev, -1, max8998_devs, ARRAY_SIZE(max8998_devs), NULL, 0); diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h index f0a20cdc288c..3bd2371a05f7 100644 --- a/include/linux/mfd/max8998-private.h +++ b/include/linux/mfd/max8998-private.h @@ -1,5 +1,5 @@ /* - * max8698.h - Voltage regulator driver for the Maxim 8998 + * max8998.h - Voltage regulator driver for the Maxim 8998 * * Copyright (C) 2009-2010 Samsung Electrnoics * Kyungmin Park @@ -23,6 +23,8 @@ #ifndef __LINUX_MFD_MAX8998_PRIV_H #define __LINUX_MFD_MAX8998_PRIV_H +#define MAX8998_NUM_IRQ_REGS 4 + /* MAX 8998 registers */ enum { MAX8998_REG_IRQ1, @@ -72,20 +74,86 @@ enum { MAX8998_REG_LBCNFG2, }; +/* IRQ definitions */ +enum { + MAX8998_IRQ_DCINF, + MAX8998_IRQ_DCINR, + MAX8998_IRQ_JIGF, + MAX8998_IRQ_JIGR, + MAX8998_IRQ_PWRONF, + MAX8998_IRQ_PWRONR, + + MAX8998_IRQ_WTSREVNT, + MAX8998_IRQ_SMPLEVNT, + MAX8998_IRQ_ALARM1, + MAX8998_IRQ_ALARM0, + + MAX8998_IRQ_ONKEY1S, + MAX8998_IRQ_TOPOFFR, + MAX8998_IRQ_DCINOVPR, + MAX8998_IRQ_CHGRSTF, + MAX8998_IRQ_DONER, + MAX8998_IRQ_CHGFAULT, + + MAX8998_IRQ_LOBAT1, + MAX8998_IRQ_LOBAT2, + + MAX8998_IRQ_NR, +}; + +#define MAX8998_IRQ_DCINF_MASK (1 << 2) +#define MAX8998_IRQ_DCINR_MASK (1 << 3) +#define MAX8998_IRQ_JIGF_MASK (1 << 4) +#define MAX8998_IRQ_JIGR_MASK (1 << 5) +#define MAX8998_IRQ_PWRONF_MASK (1 << 6) +#define MAX8998_IRQ_PWRONR_MASK (1 << 7) + +#define MAX8998_IRQ_WTSREVNT_MASK (1 << 0) +#define MAX8998_IRQ_SMPLEVNT_MASK (1 << 1) +#define MAX8998_IRQ_ALARM1_MASK (1 << 2) +#define MAX8998_IRQ_ALARM0_MASK (1 << 3) + +#define MAX8998_IRQ_ONKEY1S_MASK (1 << 0) +#define MAX8998_IRQ_TOPOFFR_MASK (1 << 2) +#define MAX8998_IRQ_DCINOVPR_MASK (1 << 3) +#define MAX8998_IRQ_CHGRSTF_MASK (1 << 4) +#define MAX8998_IRQ_DONER_MASK (1 << 5) +#define MAX8998_IRQ_CHGFAULT_MASK (1 << 7) + +#define MAX8998_IRQ_LOBAT1_MASK (1 << 0) +#define MAX8998_IRQ_LOBAT2_MASK (1 << 1) + /** * struct max8998_dev - max8998 master device for sub-drivers * @dev: master device of the chip (can be used to access platform data) * @i2c: i2c client private data * @iolock: mutex for serializing io access + * @irqlock: mutex for buslock + * @irq_base: base IRQ number for max8998, required for IRQs + * @irq: generic IRQ number for max8998 + * @ono: power onoff IRQ number for max8998 + * @irq_masks_cur: currently active value + * @irq_masks_cache: cached hardware value */ - struct max8998_dev { struct device *dev; struct i2c_client *i2c; struct mutex iolock; + struct mutex irqlock; + + int irq_base; + int irq; + int ono; + u8 irq_masks_cur[MAX8998_NUM_IRQ_REGS]; + u8 irq_masks_cache[MAX8998_NUM_IRQ_REGS]; }; +int max8998_irq_init(struct max8998_dev *max8998); +void max8998_irq_exit(struct max8998_dev *max8998); + extern int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest); +extern int max8998_bulk_read(struct i2c_client *i2c, u8 reg, int count, + u8 *buf); extern int max8998_write_reg(struct i2c_client *i2c, u8 reg, u8 value); extern int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask); diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index 1d3601a2d853..d47ed4c190fe 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -1,5 +1,5 @@ /* - * max8698.h - Voltage regulator driver for the Maxim 8998 + * max8998.h - Voltage regulator driver for the Maxim 8998 * * Copyright (C) 2009-2010 Samsung Electrnoics * Kyungmin Park @@ -66,13 +66,16 @@ struct max8998_regulator_data { /** * struct max8998_board - packages regulator init data - * @num_regulators: number of regultors used * @regulators: array of defined regulators + * @num_regulators: number of regultors used + * @irq_base: base IRQ number for max8998, required for IRQs + * @ono: power onoff IRQ number for max8998 */ - struct max8998_platform_data { - int num_regulators; struct max8998_regulator_data *regulators; + int num_regulators; + int irq_base; + int ono; }; #endif /* __LINUX_MFD_MAX8998_H */