From: Antony Pavlov Date: Thu, 17 Mar 2016 03:34:11 +0000 (+0300) Subject: MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias node X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2cdfec1bbb0a093836f6a471ca15e4e26f8b6401;p=openwrt%2Fstaging%2Fblogic.git MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias node The TP-LINK TL-WR1043ND board has only one serial port, so replacing the default of 0 with 0 does nothing useful. Moreover, the correct name for aliases node is "aliases" not "alias". An overview of the "aliases" node usage can be found on the device tree usage page at devicetree.org [1]. Also please see chapter 3.3 ("Aliases node") of the ePAPR 1.1 [2]. [1] http://devicetree.org/Device_Tree_Usage#aliases_Node [2] https://www.power.org/documentation/epapr-version-1-1/ Signed-off-by: Antony Pavlov Acked-by: Alban Bedel Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12872/ Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts index 4f1540e5f963..fb946a13382f 100644 --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts @@ -9,10 +9,6 @@ compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132"; model = "TP-Link TL-WR1043ND Version 1"; - alias { - serial0 = "/ahb/apb/uart@18020000"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x2000000>;