From: Adrian Schmutzler Date: Sat, 2 Jan 2021 14:05:13 +0000 (+0100) Subject: ath79: fix USB power GPIO for TP-Link TL-WR810N v1 X-Git-Tag: v19.07.7~7 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2eb8444363c15558761699fe6a5ba926b49a780d;p=openwrt%2Fstaging%2Fhauke.git ath79: fix USB power GPIO for TP-Link TL-WR810N v1 The TP-Link TL-WR810N v1 is known to cause soft-brick on ath79 and work fine for ar71xx [1]. On closer inspection, the only apparent difference is the GPIO used for the USB regulator, which deviates between the two targets. This applies the value from ar71xx to ath79. Tested successfully by a forum user. [1] https://forum.openwrt.org/t/tp-link-tl-wr810n-v1-ath79/48267 Fixes: cdbf2de77768 ("ath79: Add support for TP-Link WR810N") Fixes: FS#3522 Signed-off-by: Adrian Schmutzler (cherry picked from commit 6934d30cf8d95bc8652b4dcd8180d14e5e8e2417) --- diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts index 7d77352f84..4190ceb281 100644 --- a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts +++ b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts @@ -15,7 +15,7 @@ regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + gpio = <&gpio 11 GPIO_ACTIVE_HIGH>; enable-active-high; }; };