From: Tobias Schramm <tobias@t-sys.eu>
Date: Mon, 5 Feb 2024 19:31:59 +0000 (+0100)
Subject: realtek: 5.15: rtl93xx: fix switch/case indentation
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2f8a881895cddbadf4cc866ce72bce1d6944d744;p=openwrt%2Fstaging%2Fwigyori.git

realtek: 5.15: rtl93xx: fix switch/case indentation

Small stylistic fixup, one switch case statement was incorrectly indented.

Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
---

diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c
index 4bbcfd90f5..7e4a4dfc90 100644
--- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c
+++ b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c
@@ -2724,22 +2724,21 @@ int rtl9300_sds_check_calibration(int sds_num, phy_interface_t phy_mode)
 	errors2 = rtl9300_sds_sym_err_get(sds_num, phy_mode);
 
 	switch (phy_mode) {
-		case PHY_INTERFACE_MODE_XGMII:
-
-			if ((errors2 - errors1 > 100) ||
-			    (errors1 >= 0xffff00) || (errors2 >= 0xffff00)) {
-				pr_info("%s XSGMII error rate too high\n", __func__);
-				return 1;
-			}
-			break;
-		case PHY_INTERFACE_MODE_10GBASER:
-			if (errors2 > 0) {
-				pr_info("%s 10GBASER error rate too high\n", __func__);
-				return 1;
-			}
-			break;
-		default:
+	case PHY_INTERFACE_MODE_XGMII:
+		if ((errors2 - errors1 > 100) ||
+		    (errors1 >= 0xffff00) || (errors2 >= 0xffff00)) {
+			pr_info("%s XSGMII error rate too high\n", __func__);
 			return 1;
+		}
+		break;
+	case PHY_INTERFACE_MODE_10GBASER:
+		if (errors2 > 0) {
+			pr_info("%s 10GBASER error rate too high\n", __func__);
+			return 1;
+		}
+		break;
+	default:
+		return 1;
 	}
 
 	return 0;