From: Felix Fietkau Date: Fri, 9 Dec 2016 13:26:12 +0000 (+0100) Subject: ar71xx: remove AP113 reference design board support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=30285facbe3769ca508c865638c4ee2238270fbe;p=openwrt%2Fstaging%2Fblogic.git ar71xx: remove AP113 reference design board support Due to flash size limitations, support for this board has not been functional for years Signed-off-by: Felix Fietkau --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 38e665fb6483..dcdaab022d27 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -45,7 +45,6 @@ arduino-yun) ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt" ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1" ;; -ap113|\ db120) ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1" ;; diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index f287d4bff276..440e00f5bfb8 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -146,7 +146,6 @@ ar71xx_setup_interfaces() ubnt-unifi-outdoor) ucidef_set_interface_lan "eth0 eth1" ;; - ap113|\ pb92|\ wzr-hp-g300nh2) ucidef_add_switch "switch0" \ diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration index c6b91b77375b..c67555f963f8 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration @@ -48,7 +48,6 @@ case "$board" in dir-825-c1|\ wzr-hp-g300nh2|\ pb92|\ -ap113|\ tl-wdr4300|\ tl-wr1041n-v2|\ wrt160nl|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index ffab8ebbc4e0..cf84dadf042b 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -435,9 +435,6 @@ ar71xx_board_detect() { *"Arduino Yun") name="arduino-yun" ;; - *AP113) - name="ap113" - ;; *"AP121 reference board") name="ap121" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 0100d27211f1..b028cd35a883 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -261,7 +261,6 @@ platform_check_image() { ;; alfa-ap96|\ alfa-nx|\ - ap113|\ ap121-mini|\ ap121|\ ap135-020|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index e83e6687473e..5e0275aa064a 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -40,7 +40,6 @@ CONFIG_ATH79_MACH_ALL0315N=y CONFIG_ATH79_MACH_ANTMINER_S1=y CONFIG_ATH79_MACH_ANTMINER_S3=y CONFIG_ATH79_MACH_ANTROUTER_R1=y -CONFIG_ATH79_MACH_AP113=y CONFIG_ATH79_MACH_AP121=y CONFIG_ATH79_MACH_AP132=y CONFIG_ATH79_MACH_AP136=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index a0f24e16b50d..4d82db2c7658 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -103,16 +103,6 @@ config ATH79_MACH_ARDUINO_YUN Say 'Y' here if you want your kernel to support the Arduino Yun. -config ATH79_MACH_AP113 - bool "Atheros AP113 board support" - select SOC_AR724X - select ATH79_DEV_M25P80 - select ATH79_DEV_PB9X_PCI if PCI - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_USB - select ATH79_DEV_ETH - config ATH79_MACH_AP132 bool "Atheros AP132 reference board" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 03ca1019064e..a39e8d2de787 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -46,7 +46,6 @@ obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o obj-$(CONFIG_ATH79_MACH_ANTMINER_S1) += mach-antminer-s1.o obj-$(CONFIG_ATH79_MACH_ANTMINER_S3) += mach-antminer-s3.o obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1) += mach-antrouter-r1.o -obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c deleted file mode 100644 index 9b38faa47cdd..000000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Atheros AP113 board support - * - * Copyright (C) 2011 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "pci.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define AP113_GPIO_LED_USB 0 -#define AP113_GPIO_LED_STATUS 1 -#define AP113_GPIO_LED_ST 11 - -#define AP113_GPIO_BTN_JUMPSTART 12 - -#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL) - -static struct gpio_led ap113_leds_gpio[] __initdata = { - { - .name = "ap113:green:usb", - .gpio = AP113_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "ap113:green:status", - .gpio = AP113_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "ap113:green:st", - .gpio = AP113_GPIO_LED_ST, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap113_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP113_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, -}; - -static void __init ap113_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(0, ~BIT(0)); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_eth(0); - - ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap113_gpio_keys), - ap113_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio), - ap113_leds_gpio); - - ath79_register_pci(); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113", - ap113_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index cd26598770f9..5893790c61b5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -26,7 +26,6 @@ enum ath79_mach_type { ATH79_MACH_ANTMINER_S1, /* Antminer S1 */ ATH79_MACH_ANTMINER_S3, /* Antminer S3 */ ATH79_MACH_ANTROUTER_R1, /* Antrouter R1 */ - ATH79_MACH_AP113, /* Atheros AP113 reference board */ ATH79_MACH_AP121, /* Atheros AP121 reference board */ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ ATH79_MACH_AP132, /* Atheros AP132 reference board */ diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 3d5d20daed58..aa898ee827a7 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -4,7 +4,6 @@ # CONFIG_ATH79_MACH_ALL0258N is not set # CONFIG_ATH79_MACH_ALL0315N is not set # CONFIG_ATH79_MACH_ANTMINER_S1 is not set -# CONFIG_ATH79_MACH_AP113 is not set # CONFIG_ATH79_MACH_AP121 is not set # CONFIG_ATH79_MACH_AP132 is not set # CONFIG_ATH79_MACH_AP136 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 1c3a650c391e..49480f2be8ca 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -3,7 +3,6 @@ # CONFIG_ATH79_MACH_ALFA_NX is not set # CONFIG_ATH79_MACH_ALL0258N is not set # CONFIG_ATH79_MACH_ALL0315N is not set -# CONFIG_ATH79_MACH_AP113 is not set # CONFIG_ATH79_MACH_AP121 is not set # CONFIG_ATH79_MACH_AP132 is not set # CONFIG_ATH79_MACH_AP136 is not set