From: Linus Walleij Date: Mon, 11 Apr 2022 21:46:17 +0000 (+0200) Subject: generic: backport 5.16 RTL8366RB improvements X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=30d2fcffeb9b5eee0f7a64a1589b5fd839f8be4d;p=openwrt%2Fstaging%2Flinusw.git generic: backport 5.16 RTL8366RB improvements The prerequisite DSA changes for the nice RTL8366RB improvements are already backported so bring back these changes as well. Signed-off-by: Linus Walleij --- diff --git a/target/linux/generic/backport-5.15/774-v5.16-01-net-dsa-rtl8366rb-Support-bridge-offloading.patch b/target/linux/generic/backport-5.15/774-v5.16-01-net-dsa-rtl8366rb-Support-bridge-offloading.patch new file mode 100644 index 0000000000..78570c5e6e --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.16-01-net-dsa-rtl8366rb-Support-bridge-offloading.patch @@ -0,0 +1,141 @@ +From c9111895fd38dadf125e07be627778a9950d8d77 Mon Sep 17 00:00:00 2001 +From: DENG Qingfang +Date: Sun, 26 Sep 2021 00:59:24 +0200 +Subject: [PATCH 01/11] net: dsa: rtl8366rb: Support bridge offloading +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Use port isolation registers to configure bridge offloading. + +Tested on the D-Link DIR-685, switching between ports and +sniffing ports to make sure no packets leak. + +Cc: Vladimir Oltean +Cc: Mauri Sandberg +Reviewed-by: Vladimir Oltean +Reviewed-by: Alvin Å ipraga +Reviewed-by: Florian Fainelli +Signed-off-by: DENG Qingfang +Signed-off-by: Linus Walleij +Signed-off-by: David S. Miller +--- + drivers/net/dsa/rtl8366rb.c | 86 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 86 insertions(+) + +--- a/drivers/net/dsa/rtl8366rb.c ++++ b/drivers/net/dsa/rtl8366rb.c +@@ -300,6 +300,13 @@ + #define RTL8366RB_INTERRUPT_STATUS_REG 0x0442 + #define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */ + ++/* Port isolation registers */ ++#define RTL8366RB_PORT_ISO_BASE 0x0F08 ++#define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum)) ++#define RTL8366RB_PORT_ISO_EN BIT(0) ++#define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1) ++#define RTL8366RB_PORT_ISO_PORTS(pmask) ((pmask) << 1) ++ + /* bits 0..5 enable force when cleared */ + #define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11 + +@@ -835,6 +842,21 @@ static int rtl8366rb_setup(struct dsa_sw + if (ret) + return ret; + ++ /* Isolate all user ports so they can only send packets to itself and the CPU port */ ++ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { ++ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i), ++ RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) | ++ RTL8366RB_PORT_ISO_EN); ++ if (ret) ++ return ret; ++ } ++ /* CPU port can send packets to all ports */ ++ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU), ++ RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) | ++ RTL8366RB_PORT_ISO_EN); ++ if (ret) ++ return ret; ++ + /* Set up the "green ethernet" feature */ + ret = rtl8366rb_jam_table(rtl8366rb_green_jam, + ARRAY_SIZE(rtl8366rb_green_jam), smi, false); +@@ -1127,6 +1149,68 @@ rtl8366rb_port_disable(struct dsa_switch + rb8366rb_set_port_led(smi, port, false); + } + ++static int ++rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port, ++ struct net_device *bridge) ++{ ++ struct realtek_smi *smi = ds->priv; ++ unsigned int port_bitmap = 0; ++ int ret, i; ++ ++ /* Loop over all other ports than the current one */ ++ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { ++ /* Current port handled last */ ++ if (i == port) ++ continue; ++ /* Not on this bridge */ ++ if (dsa_to_port(ds, i)->bridge_dev != bridge) ++ continue; ++ /* Join this port to each other port on the bridge */ ++ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i), ++ RTL8366RB_PORT_ISO_PORTS(BIT(port)), ++ RTL8366RB_PORT_ISO_PORTS(BIT(port))); ++ if (ret) ++ dev_err(smi->dev, "failed to join port %d\n", port); ++ ++ port_bitmap |= BIT(i); ++ } ++ ++ /* Set the bits for the ports we can access */ ++ return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port), ++ RTL8366RB_PORT_ISO_PORTS(port_bitmap), ++ RTL8366RB_PORT_ISO_PORTS(port_bitmap)); ++} ++ ++static void ++rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port, ++ struct net_device *bridge) ++{ ++ struct realtek_smi *smi = ds->priv; ++ unsigned int port_bitmap = 0; ++ int ret, i; ++ ++ /* Loop over all other ports than this one */ ++ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { ++ /* Current port handled last */ ++ if (i == port) ++ continue; ++ /* Not on this bridge */ ++ if (dsa_to_port(ds, i)->bridge_dev != bridge) ++ continue; ++ /* Remove this port from any other port on the bridge */ ++ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i), ++ RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0); ++ if (ret) ++ dev_err(smi->dev, "failed to leave port %d\n", port); ++ ++ port_bitmap |= BIT(i); ++ } ++ ++ /* Clear the bits for the ports we can not access, leave ourselves */ ++ regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port), ++ RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0); ++} ++ + static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu) + { + struct realtek_smi *smi = ds->priv; +@@ -1510,6 +1594,8 @@ static const struct dsa_switch_ops rtl83 + .get_strings = rtl8366_get_strings, + .get_ethtool_stats = rtl8366_get_ethtool_stats, + .get_sset_count = rtl8366_get_sset_count, ++ .port_bridge_join = rtl8366rb_port_bridge_join, ++ .port_bridge_leave = rtl8366rb_port_bridge_leave, + .port_vlan_filtering = rtl8366_vlan_filtering, + .port_vlan_add = rtl8366_vlan_add, + .port_vlan_del = rtl8366_vlan_del, diff --git a/target/linux/generic/backport-5.15/774-v5.16-02-net-dsa-rtl8366-Drop-custom-VLAN-set-up.patch b/target/linux/generic/backport-5.15/774-v5.16-02-net-dsa-rtl8366-Drop-custom-VLAN-set-up.patch new file mode 100644 index 0000000000..e61349a32c --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.16-02-net-dsa-rtl8366-Drop-custom-VLAN-set-up.patch @@ -0,0 +1,118 @@ +From 96cf10a8e7297065459473c081a6fb6432a22312 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Sun, 26 Sep 2021 00:59:25 +0200 +Subject: [PATCH 02/11] net: dsa: rtl8366: Drop custom VLAN set-up +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This hacky default VLAN setup was done in order to direct +packets to the right ports and provide port isolation, both +which we now support properly using custom tags and proper +bridge port isolation. + +We can drop the custom VLAN code and leave all VLAN handling +alone, as users expect things to be. We can also drop +ds->configure_vlan_while_not_filtering = false; and let +the core deal with any VLANs it wants. + +Cc: Mauri Sandberg +Cc: DENG Qingfang +Reviewed-by: Vladimir Oltean +Reviewed-by: Alvin Å ipraga +Reviewed-by: Florian Fainelli +Signed-off-by: Linus Walleij +Signed-off-by: David S. Miller +--- + drivers/net/dsa/realtek-smi-core.h | 1 - + drivers/net/dsa/rtl8366.c | 48 ------------------------------ + drivers/net/dsa/rtl8366rb.c | 4 +-- + 3 files changed, 1 insertion(+), 52 deletions(-) + +--- a/drivers/net/dsa/realtek-smi-core.h ++++ b/drivers/net/dsa/realtek-smi-core.h +@@ -129,7 +129,6 @@ int rtl8366_set_pvid(struct realtek_smi + int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable); + int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable); + int rtl8366_reset_vlan(struct realtek_smi *smi); +-int rtl8366_init_vlan(struct realtek_smi *smi); + int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, + struct netlink_ext_ack *extack); + int rtl8366_vlan_add(struct dsa_switch *ds, int port, +--- a/drivers/net/dsa/rtl8366.c ++++ b/drivers/net/dsa/rtl8366.c +@@ -292,54 +292,6 @@ int rtl8366_reset_vlan(struct realtek_sm + } + EXPORT_SYMBOL_GPL(rtl8366_reset_vlan); + +-int rtl8366_init_vlan(struct realtek_smi *smi) +-{ +- int port; +- int ret; +- +- ret = rtl8366_reset_vlan(smi); +- if (ret) +- return ret; +- +- /* Loop over the available ports, for each port, associate +- * it with the VLAN (port+1) +- */ +- for (port = 0; port < smi->num_ports; port++) { +- u32 mask; +- +- if (port == smi->cpu_port) +- /* For the CPU port, make all ports members of this +- * VLAN. +- */ +- mask = GENMASK((int)smi->num_ports - 1, 0); +- else +- /* For all other ports, enable itself plus the +- * CPU port. +- */ +- mask = BIT(port) | BIT(smi->cpu_port); +- +- /* For each port, set the port as member of VLAN (port+1) +- * and untagged, except for the CPU port: the CPU port (5) is +- * member of VLAN 6 and so are ALL the other ports as well. +- * Use filter 0 (no filter). +- */ +- dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n", +- (port + 1), port, mask); +- ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0); +- if (ret) +- return ret; +- +- dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n", +- (port + 1), port, (port + 1)); +- ret = rtl8366_set_pvid(smi, port, (port + 1)); +- if (ret) +- return ret; +- } +- +- return rtl8366_enable_vlan(smi, true); +-} +-EXPORT_SYMBOL_GPL(rtl8366_init_vlan); +- + int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, + struct netlink_ext_ack *extack) + { +--- a/drivers/net/dsa/rtl8366rb.c ++++ b/drivers/net/dsa/rtl8366rb.c +@@ -985,7 +985,7 @@ static int rtl8366rb_setup(struct dsa_sw + return ret; + } + +- ret = rtl8366_init_vlan(smi); ++ ret = rtl8366_reset_vlan(smi); + if (ret) + return ret; + +@@ -999,8 +999,6 @@ static int rtl8366rb_setup(struct dsa_sw + return -ENODEV; + } + +- ds->configure_vlan_while_not_filtering = false; +- + return 0; + } + diff --git a/target/linux/generic/backport-5.15/774-v5.16-03-net-dsa-rtl8366rb-Rewrite-weird-VLAN-filering-enable.patch b/target/linux/generic/backport-5.15/774-v5.16-03-net-dsa-rtl8366rb-Rewrite-weird-VLAN-filering-enable.patch new file mode 100644 index 0000000000..2b19752399 --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.16-03-net-dsa-rtl8366rb-Rewrite-weird-VLAN-filering-enable.patch @@ -0,0 +1,270 @@ +From 7028f54b620f8df344b18e46e4a78e266091ab45 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Sun, 26 Sep 2021 00:59:26 +0200 +Subject: [PATCH 03/11] net: dsa: rtl8366rb: Rewrite weird VLAN filering + enablement +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +While we were defining one VLAN per port for isolating the ports +the port_vlan_filtering() callback was implemented to enable a +VLAN on the port + 1. This function makes no sense, not only is +it incomplete as it only enables the VLAN, it doesn't do what +the callback is supposed to do, which is to selectively enable +and disable filtering on a certain port. + +Implement the correct callback: we have two registers dealing +with filtering on the RTL9366RB, so we implement an ASIC-specific +callback and implement filering using the register bit that makes +the switch drop frames if the port is not in the VLAN member set. + +The DSA documentation Documentation/networking/switchdev.rst states: + + When the bridge has VLAN filtering enabled and a PVID is not + configured on the ingress port, untagged and 802.1p tagged + packets must be dropped. When the bridge has VLAN filtering + enabled and a PVID exists on the ingress port, untagged and + priority-tagged packets must be accepted and forwarded according + to the bridge's port membership of the PVID VLAN. When the + bridge has VLAN filtering disabled, the presence/lack of a + PVID should not influence the packet forwarding decision. + +To comply with this, we add two arrays of bool in the RTL8366RB +state that keeps track of if filtering and PVID is enabled or +not for each port. We then add code such that whenever filtering +or PVID changes, we update the filter according to the +specification. + +Cc: Vladimir Oltean +Cc: Mauri Sandberg +Cc: Alvin Å ipraga +Cc: Florian Fainelli +Cc: DENG Qingfang +Signed-off-by: Linus Walleij +Signed-off-by: David S. Miller +--- + drivers/net/dsa/realtek-smi-core.h | 2 - + drivers/net/dsa/rtl8366.c | 35 ---------- + drivers/net/dsa/rtl8366rb.c | 102 +++++++++++++++++++++++++++-- + 3 files changed, 95 insertions(+), 44 deletions(-) + +--- a/drivers/net/dsa/realtek-smi-core.h ++++ b/drivers/net/dsa/realtek-smi-core.h +@@ -129,8 +129,6 @@ int rtl8366_set_pvid(struct realtek_smi + int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable); + int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable); + int rtl8366_reset_vlan(struct realtek_smi *smi); +-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, +- struct netlink_ext_ack *extack); + int rtl8366_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack); +--- a/drivers/net/dsa/rtl8366.c ++++ b/drivers/net/dsa/rtl8366.c +@@ -292,41 +292,6 @@ int rtl8366_reset_vlan(struct realtek_sm + } + EXPORT_SYMBOL_GPL(rtl8366_reset_vlan); + +-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, +- struct netlink_ext_ack *extack) +-{ +- struct realtek_smi *smi = ds->priv; +- struct rtl8366_vlan_4k vlan4k; +- int ret; +- +- /* Use VLAN nr port + 1 since VLAN0 is not valid */ +- if (!smi->ops->is_vlan_valid(smi, port + 1)) +- return -EINVAL; +- +- dev_info(smi->dev, "%s filtering on port %d\n", +- vlan_filtering ? "enable" : "disable", +- port); +- +- /* TODO: +- * The hardware support filter ID (FID) 0..7, I have no clue how to +- * support this in the driver when the callback only says on/off. +- */ +- ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k); +- if (ret) +- return ret; +- +- /* Just set the filter to FID 1 for now then */ +- ret = rtl8366_set_vlan(smi, port + 1, +- vlan4k.member, +- vlan4k.untag, +- 1); +- if (ret) +- return ret; +- +- return 0; +-} +-EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering); +- + int rtl8366_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +--- a/drivers/net/dsa/rtl8366rb.c ++++ b/drivers/net/dsa/rtl8366rb.c +@@ -143,6 +143,21 @@ + #define RTL8366RB_PHY_NO_OFFSET 9 + #define RTL8366RB_PHY_NO_MASK (0x1f << 9) + ++/* VLAN Ingress Control Register 1, one bit per port. ++ * bit 0 .. 5 will make the switch drop ingress frames without ++ * VID such as untagged or priority-tagged frames for respective ++ * port. ++ * bit 6 .. 11 will make the switch drop ingress frames carrying ++ * a C-tag with VID != 0 for respective port. ++ */ ++#define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E ++#define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6)) ++ ++/* VLAN Ingress Control Register 2, one bit per port. ++ * bit0 .. bit5 will make the switch drop all ingress frames with ++ * a VLAN classification that does not include the port is in its ++ * member set. ++ */ + #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f + + /* LED control registers */ +@@ -321,9 +336,13 @@ + /** + * struct rtl8366rb - RTL8366RB-specific data + * @max_mtu: per-port max MTU setting ++ * @pvid_enabled: if PVID is set for respective port ++ * @vlan_filtering: if VLAN filtering is enabled for respective port + */ + struct rtl8366rb { + unsigned int max_mtu[RTL8366RB_NUM_PORTS]; ++ bool pvid_enabled[RTL8366RB_NUM_PORTS]; ++ bool vlan_filtering[RTL8366RB_NUM_PORTS]; + }; + + static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { +@@ -933,11 +952,13 @@ static int rtl8366rb_setup(struct dsa_sw + if (ret) + return ret; + +- /* Discard VLAN tagged packets if the port is not a member of +- * the VLAN with which the packets is associated. +- */ ++ /* Accept all packets by default, we enable filtering on-demand */ ++ ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG, ++ 0); ++ if (ret) ++ return ret; + ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, +- RTL8366RB_PORT_ALL); ++ 0); + if (ret) + return ret; + +@@ -1209,6 +1230,53 @@ rtl8366rb_port_bridge_leave(struct dsa_s + RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0); + } + ++/** ++ * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames ++ * @smi: SMI state container ++ * @port: the port to drop untagged and C-tagged frames on ++ * @drop: whether to drop or pass untagged and C-tagged frames ++ */ ++static int rtl8366rb_drop_untagged(struct realtek_smi *smi, int port, bool drop) ++{ ++ return regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG, ++ RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port), ++ drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0); ++} ++ ++static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port, ++ bool vlan_filtering, ++ struct netlink_ext_ack *extack) ++{ ++ struct realtek_smi *smi = ds->priv; ++ struct rtl8366rb *rb; ++ int ret; ++ ++ rb = smi->chip_data; ++ ++ dev_dbg(smi->dev, "port %d: %s VLAN filtering\n", port, ++ vlan_filtering ? "enable" : "disable"); ++ ++ /* If the port is not in the member set, the frame will be dropped */ ++ ret = regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, ++ BIT(port), vlan_filtering ? BIT(port) : 0); ++ if (ret) ++ return ret; ++ ++ /* Keep track if filtering is enabled on each port */ ++ rb->vlan_filtering[port] = vlan_filtering; ++ ++ /* If VLAN filtering is enabled and PVID is also enabled, we must ++ * not drop any untagged or C-tagged frames. If we turn off VLAN ++ * filtering on a port, we need ti accept any frames. ++ */ ++ if (vlan_filtering) ++ ret = rtl8366rb_drop_untagged(smi, port, !rb->pvid_enabled[port]); ++ else ++ ret = rtl8366rb_drop_untagged(smi, port, false); ++ ++ return ret; ++} ++ + static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu) + { + struct realtek_smi *smi = ds->priv; +@@ -1420,14 +1488,34 @@ static int rtl8366rb_get_mc_index(struct + + static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index) + { ++ struct rtl8366rb *rb; ++ bool pvid_enabled; ++ int ret; ++ ++ rb = smi->chip_data; ++ pvid_enabled = !!index; ++ + if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS) + return -EINVAL; + +- return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), ++ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), + RTL8366RB_PORT_VLAN_CTRL_MASK << + RTL8366RB_PORT_VLAN_CTRL_SHIFT(port), + (index & RTL8366RB_PORT_VLAN_CTRL_MASK) << + RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)); ++ if (ret) ++ return ret; ++ ++ rb->pvid_enabled[port] = pvid_enabled; ++ ++ /* If VLAN filtering is enabled and PVID is also enabled, we must ++ * not drop any untagged or C-tagged frames. Make sure to update the ++ * filtering setting. ++ */ ++ if (rb->vlan_filtering[port]) ++ ret = rtl8366rb_drop_untagged(smi, port, !pvid_enabled); ++ ++ return ret; + } + + static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan) +@@ -1437,7 +1525,7 @@ static bool rtl8366rb_is_vlan_valid(stru + if (smi->vlan4k_enabled) + max = RTL8366RB_NUM_VIDS - 1; + +- if (vlan == 0 || vlan > max) ++ if (vlan > max) + return false; + + return true; +@@ -1594,7 +1682,7 @@ static const struct dsa_switch_ops rtl83 + .get_sset_count = rtl8366_get_sset_count, + .port_bridge_join = rtl8366rb_port_bridge_join, + .port_bridge_leave = rtl8366rb_port_bridge_leave, +- .port_vlan_filtering = rtl8366_vlan_filtering, ++ .port_vlan_filtering = rtl8366rb_vlan_filtering, + .port_vlan_add = rtl8366_vlan_add, + .port_vlan_del = rtl8366_vlan_del, + .port_enable = rtl8366rb_port_enable, diff --git a/target/linux/generic/backport-5.15/774-v5.16-06-net-dsa-rtl8366-Drop-and-depromote-pointless-prints.patch b/target/linux/generic/backport-5.15/774-v5.16-06-net-dsa-rtl8366-Drop-and-depromote-pointless-prints.patch new file mode 100644 index 0000000000..b56032c366 --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.16-06-net-dsa-rtl8366-Drop-and-depromote-pointless-prints.patch @@ -0,0 +1,51 @@ +From ddb59a5dc42714999c335dab4bf256125ba3120c Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Sun, 26 Sep 2021 00:59:29 +0200 +Subject: [PATCH 06/11] net: dsa: rtl8366: Drop and depromote pointless prints +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +We don't need a message for every VLAN association, dbg +is fine. The message about adding the DSA or CPU +port to a VLAN is directly misleading, this is perfectly +fine. + +Cc: Vladimir Oltean +Cc: Mauri Sandberg +Cc: DENG Qingfang +Reviewed-by: Alvin Å ipraga +Reviewed-by: Florian Fainelli +Signed-off-by: Linus Walleij +Signed-off-by: David S. Miller +--- + drivers/net/dsa/rtl8366.c | 11 ++++------- + 1 file changed, 4 insertions(+), 7 deletions(-) + +--- a/drivers/net/dsa/rtl8366.c ++++ b/drivers/net/dsa/rtl8366.c +@@ -318,12 +318,9 @@ int rtl8366_vlan_add(struct dsa_switch * + return ret; + } + +- dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n", +- vlan->vid, port, untagged ? "untagged" : "tagged", +- pvid ? " PVID" : "no PVID"); +- +- if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port)) +- dev_err(smi->dev, "port is DSA or CPU port\n"); ++ dev_dbg(smi->dev, "add VLAN %d on port %d, %s, %s\n", ++ vlan->vid, port, untagged ? "untagged" : "tagged", ++ pvid ? "PVID" : "no PVID"); + + member |= BIT(port); + +@@ -356,7 +353,7 @@ int rtl8366_vlan_del(struct dsa_switch * + struct realtek_smi *smi = ds->priv; + int ret, i; + +- dev_info(smi->dev, "del VLAN %04x on port %d\n", vlan->vid, port); ++ dev_dbg(smi->dev, "del VLAN %d on port %d\n", vlan->vid, port); + + for (i = 0; i < smi->num_vlan_mc; i++) { + struct rtl8366_vlan_mc vlanmc; diff --git a/target/linux/generic/backport-5.15/774-v5.16-07-net-dsa-rtl8366rb-Use-core-filtering-tracking.patch b/target/linux/generic/backport-5.15/774-v5.16-07-net-dsa-rtl8366rb-Use-core-filtering-tracking.patch new file mode 100644 index 0000000000..8cd1df97f2 --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.16-07-net-dsa-rtl8366rb-Use-core-filtering-tracking.patch @@ -0,0 +1,61 @@ +From 5c9b66f3c8a3f72fa2a58e89a57c6d7afd550bf0 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Wed, 29 Sep 2021 13:23:22 +0200 +Subject: [PATCH 07/11] net: dsa: rtl8366rb: Use core filtering tracking +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +We added a state variable to track whether a certain port +was VLAN filtering or not, but we can just inquire the DSA +core about this. + +Cc: Vladimir Oltean +Cc: Mauri Sandberg +Cc: DENG Qingfang +Cc: Alvin Å ipraga +Cc: Reviewed-by: Florian Fainelli +Signed-off-by: Linus Walleij +Signed-off-by: David S. Miller +--- + drivers/net/dsa/rtl8366rb.c | 9 ++------- + 1 file changed, 2 insertions(+), 7 deletions(-) + +--- a/drivers/net/dsa/rtl8366rb.c ++++ b/drivers/net/dsa/rtl8366rb.c +@@ -337,12 +337,10 @@ + * struct rtl8366rb - RTL8366RB-specific data + * @max_mtu: per-port max MTU setting + * @pvid_enabled: if PVID is set for respective port +- * @vlan_filtering: if VLAN filtering is enabled for respective port + */ + struct rtl8366rb { + unsigned int max_mtu[RTL8366RB_NUM_PORTS]; + bool pvid_enabled[RTL8366RB_NUM_PORTS]; +- bool vlan_filtering[RTL8366RB_NUM_PORTS]; + }; + + static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { +@@ -1262,12 +1260,9 @@ static int rtl8366rb_vlan_filtering(stru + if (ret) + return ret; + +- /* Keep track if filtering is enabled on each port */ +- rb->vlan_filtering[port] = vlan_filtering; +- + /* If VLAN filtering is enabled and PVID is also enabled, we must + * not drop any untagged or C-tagged frames. If we turn off VLAN +- * filtering on a port, we need ti accept any frames. ++ * filtering on a port, we need to accept any frames. + */ + if (vlan_filtering) + ret = rtl8366rb_drop_untagged(smi, port, !rb->pvid_enabled[port]); +@@ -1512,7 +1507,7 @@ static int rtl8366rb_set_mc_index(struct + * not drop any untagged or C-tagged frames. Make sure to update the + * filtering setting. + */ +- if (rb->vlan_filtering[port]) ++ if (dsa_port_is_vlan_filtering(dsa_to_port(smi->ds, port))) + ret = rtl8366rb_drop_untagged(smi, port, !pvid_enabled); + + return ret; diff --git a/target/linux/generic/backport-5.15/774-v5.16-08-net-dsa-rtl8366rb-Support-disabling-learning.patch b/target/linux/generic/backport-5.15/774-v5.16-08-net-dsa-rtl8366rb-Support-disabling-learning.patch new file mode 100644 index 0000000000..8306eb5aef --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.16-08-net-dsa-rtl8366rb-Support-disabling-learning.patch @@ -0,0 +1,115 @@ +From 831a3d26bea0d14f8563eecf96def660a74a3000 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Tue, 5 Oct 2021 21:47:02 +0200 +Subject: [PATCH 08/11] net: dsa: rtl8366rb: Support disabling learning +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The RTL8366RB hardware supports disabling learning per-port +so let's make use of this feature. Rename some unfortunately +named registers in the process. + +Suggested-by: Vladimir Oltean +Cc: Alvin Å ipraga +Cc: Mauri Sandberg +Cc: Florian Fainelli +Cc: DENG Qingfang +Reviewed-by: Vladimir Oltean +Signed-off-by: Linus Walleij +Signed-off-by: David S. Miller +--- + drivers/net/dsa/rtl8366rb.c | 50 ++++++++++++++++++++++++++++++++----- + 1 file changed, 44 insertions(+), 6 deletions(-) + +--- a/drivers/net/dsa/rtl8366rb.c ++++ b/drivers/net/dsa/rtl8366rb.c +@@ -14,6 +14,7 @@ + + #include + #include ++#include + #include + #include + #include +@@ -42,9 +43,12 @@ + /* Port Enable Control register */ + #define RTL8366RB_PECR 0x0001 + +-/* Switch Security Control registers */ +-#define RTL8366RB_SSCR0 0x0002 +-#define RTL8366RB_SSCR1 0x0003 ++/* Switch per-port learning disablement register */ ++#define RTL8366RB_PORT_LEARNDIS_CTRL 0x0002 ++ ++/* Security control, actually aging register */ ++#define RTL8366RB_SECURITY_CTRL 0x0003 ++ + #define RTL8366RB_SSCR2 0x0004 + #define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0) + +@@ -927,13 +931,14 @@ static int rtl8366rb_setup(struct dsa_sw + /* layer 2 size, see rtl8366rb_change_mtu() */ + rb->max_mtu[i] = 1532; + +- /* Enable learning for all ports */ +- ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0); ++ /* Disable learning for all ports */ ++ ret = regmap_write(smi->map, RTL8366RB_PORT_LEARNDIS_CTRL, ++ RTL8366RB_PORT_ALL); + if (ret) + return ret; + + /* Enable auto ageing for all ports */ +- ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0); ++ ret = regmap_write(smi->map, RTL8366RB_SECURITY_CTRL, 0); + if (ret) + return ret; + +@@ -1272,6 +1277,37 @@ static int rtl8366rb_vlan_filtering(stru + return ret; + } + ++static int ++rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port, ++ struct switchdev_brport_flags flags, ++ struct netlink_ext_ack *extack) ++{ ++ /* We support enabling/disabling learning */ ++ if (flags.mask & ~(BR_LEARNING)) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int ++rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port, ++ struct switchdev_brport_flags flags, ++ struct netlink_ext_ack *extack) ++{ ++ struct realtek_smi *smi = ds->priv; ++ int ret; ++ ++ if (flags.mask & BR_LEARNING) { ++ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_LEARNDIS_CTRL, ++ BIT(port), ++ (flags.val & BR_LEARNING) ? 0 : BIT(port)); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ + static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu) + { + struct realtek_smi *smi = ds->priv; +@@ -1682,6 +1718,8 @@ static const struct dsa_switch_ops rtl83 + .port_vlan_del = rtl8366_vlan_del, + .port_enable = rtl8366rb_port_enable, + .port_disable = rtl8366rb_port_disable, ++ .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, ++ .port_bridge_flags = rtl8366rb_port_bridge_flags, + .port_change_mtu = rtl8366rb_change_mtu, + .port_max_mtu = rtl8366rb_max_mtu, + }; diff --git a/target/linux/generic/backport-5.15/774-v5.16-09-net-dsa-rtl8366rb-Support-fast-aging.patch b/target/linux/generic/backport-5.15/774-v5.16-09-net-dsa-rtl8366rb-Support-fast-aging.patch new file mode 100644 index 0000000000..a74108e23d --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.16-09-net-dsa-rtl8366rb-Support-fast-aging.patch @@ -0,0 +1,57 @@ +From 8eb13420eb9ab4a4e2ebd612bf5dc9dba0039236 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Tue, 5 Oct 2021 21:47:03 +0200 +Subject: [PATCH 09/11] net: dsa: rtl8366rb: Support fast aging +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This implements fast aging per-port using the special "security" +register, which will flush any learned L2 LUT entries on a port. + +The vendor API just enabled setting and clearing this bit, so +we set it to age out any entries on the port and then we clear +it again. + +Suggested-by: Vladimir Oltean +Cc: Mauri Sandberg +Cc: DENG Qingfang +Cc: Florian Fainelli +Reviewed-by: Alvin Å ipraga +Signed-off-by: Linus Walleij +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/rtl8366rb.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/drivers/net/dsa/rtl8366rb.c ++++ b/drivers/net/dsa/rtl8366rb.c +@@ -1308,6 +1308,19 @@ rtl8366rb_port_bridge_flags(struct dsa_s + return 0; + } + ++static void ++rtl8366rb_port_fast_age(struct dsa_switch *ds, int port) ++{ ++ struct realtek_smi *smi = ds->priv; ++ ++ /* This will age out any learned L2 entries */ ++ regmap_update_bits(smi->map, RTL8366RB_SECURITY_CTRL, ++ BIT(port), BIT(port)); ++ /* Restore the normal state of things */ ++ regmap_update_bits(smi->map, RTL8366RB_SECURITY_CTRL, ++ BIT(port), 0); ++} ++ + static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu) + { + struct realtek_smi *smi = ds->priv; +@@ -1720,6 +1733,7 @@ static const struct dsa_switch_ops rtl83 + .port_disable = rtl8366rb_port_disable, + .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, + .port_bridge_flags = rtl8366rb_port_bridge_flags, ++ .port_fast_age = rtl8366rb_port_fast_age, + .port_change_mtu = rtl8366rb_change_mtu, + .port_max_mtu = rtl8366rb_max_mtu, + }; diff --git a/target/linux/generic/backport-5.15/774-v5.16-10-net-dsa-rtl8366rb-Support-setting-STP-state.patch b/target/linux/generic/backport-5.15/774-v5.16-10-net-dsa-rtl8366rb-Support-setting-STP-state.patch new file mode 100644 index 0000000000..e787ce9481 --- /dev/null +++ b/target/linux/generic/backport-5.15/774-v5.16-10-net-dsa-rtl8366rb-Support-setting-STP-state.patch @@ -0,0 +1,107 @@ +From 90c855471a89d3e05ecf5b6464bd04abf2c83b70 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Tue, 5 Oct 2021 21:47:04 +0200 +Subject: [PATCH 10/11] net: dsa: rtl8366rb: Support setting STP state +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This adds support for setting the STP state to the RTL8366RB +DSA switch. This rids the following message from the kernel on +e.g. OpenWrt: + +DSA: failed to set STP state 3 (-95) + +Since the RTL8366RB has one STP state register per FID with +two bit per port in each, we simply loop over all the FIDs +and set the state on all of them. + +Cc: Vladimir Oltean +Cc: Alvin Å ipraga +Cc: Mauri Sandberg +Cc: DENG Qingfang +Signed-off-by: Linus Walleij +Reviewed-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + drivers/net/dsa/rtl8366rb.c | 48 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 48 insertions(+) + +--- a/drivers/net/dsa/rtl8366rb.c ++++ b/drivers/net/dsa/rtl8366rb.c +@@ -110,6 +110,18 @@ + + #define RTL8366RB_POWER_SAVING_REG 0x0021 + ++/* Spanning tree status (STP) control, two bits per port per FID */ ++#define RTL8366RB_STP_STATE_BASE 0x0050 /* 0x0050..0x0057 */ ++#define RTL8366RB_STP_STATE_DISABLED 0x0 ++#define RTL8366RB_STP_STATE_BLOCKING 0x1 ++#define RTL8366RB_STP_STATE_LEARNING 0x2 ++#define RTL8366RB_STP_STATE_FORWARDING 0x3 ++#define RTL8366RB_STP_MASK GENMASK(1, 0) ++#define RTL8366RB_STP_STATE(port, state) \ ++ ((state) << ((port) * 2)) ++#define RTL8366RB_STP_STATE_MASK(port) \ ++ RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK) ++ + /* CPU port control reg */ + #define RTL8368RB_CPU_CTRL_REG 0x0061 + #define RTL8368RB_CPU_PORTS_MSK 0x00FF +@@ -234,6 +246,7 @@ + #define RTL8366RB_NUM_LEDGROUPS 4 + #define RTL8366RB_NUM_VIDS 4096 + #define RTL8366RB_PRIORITYMAX 7 ++#define RTL8366RB_NUM_FIDS 8 + #define RTL8366RB_FIDMAX 7 + + #define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */ +@@ -1309,6 +1322,40 @@ rtl8366rb_port_bridge_flags(struct dsa_s + } + + static void ++rtl8366rb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) ++{ ++ struct realtek_smi *smi = ds->priv; ++ u32 val; ++ int i; ++ ++ switch (state) { ++ case BR_STATE_DISABLED: ++ val = RTL8366RB_STP_STATE_DISABLED; ++ break; ++ case BR_STATE_BLOCKING: ++ case BR_STATE_LISTENING: ++ val = RTL8366RB_STP_STATE_BLOCKING; ++ break; ++ case BR_STATE_LEARNING: ++ val = RTL8366RB_STP_STATE_LEARNING; ++ break; ++ case BR_STATE_FORWARDING: ++ val = RTL8366RB_STP_STATE_FORWARDING; ++ break; ++ default: ++ dev_err(smi->dev, "unknown bridge state requested\n"); ++ return; ++ }; ++ ++ /* Set the same status for the port on all the FIDs */ ++ for (i = 0; i < RTL8366RB_NUM_FIDS; i++) { ++ regmap_update_bits(smi->map, RTL8366RB_STP_STATE_BASE + i, ++ RTL8366RB_STP_STATE_MASK(port), ++ RTL8366RB_STP_STATE(port, val)); ++ } ++} ++ ++static void + rtl8366rb_port_fast_age(struct dsa_switch *ds, int port) + { + struct realtek_smi *smi = ds->priv; +@@ -1733,6 +1780,7 @@ static const struct dsa_switch_ops rtl83 + .port_disable = rtl8366rb_port_disable, + .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, + .port_bridge_flags = rtl8366rb_port_bridge_flags, ++ .port_stp_state_set = rtl8366rb_port_stp_state_set, + .port_fast_age = rtl8366rb_port_fast_age, + .port_change_mtu = rtl8366rb_change_mtu, + .port_max_mtu = rtl8366rb_max_mtu,