From: John Garry Date: Thu, 25 Feb 2016 09:42:14 +0000 (+0800) Subject: hisi_sas: add hisi_sas_slave_configure() X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=31eec8a6c013f374ecdcae1b0c6c7fb78feccdc1;p=openwrt%2Fstaging%2Fblogic.git hisi_sas: add hisi_sas_slave_configure() In high-datarate aging tests, it is found that the SCSI framework can periodically issue lu resets as some commands timeout. Response TASK SET FULL and SAS_QUEUE_FULL may be returned many times for the same command, causing the timeouts. The SAS_QUEUE_FULL errors come from TRANS_TX_CREDIT_TIMEOUT_ERR, TRANS_TX_CLOSE_NORMAL_ERR, and TRANS_TX_ERR_FRAME_TXED errors. They do not mean that the queue is full in the host, but rather it is equivalent to meaning the queue is full for the sdev. To overcome this, the queue depth for the sdev is reduced to 64 (from 256, set in sas_slave_configure()). Normally error code SAS_QUEUE_FULL will result in the sdev queue depth falling, but it falls too slowly during high-datarate tests and commands timeout before it has fallen to an adequete level from original value. Signed-off-by: John Garry Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index e51612f7f933..097ab4f27a6b 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -453,6 +453,19 @@ static int hisi_sas_dev_found(struct domain_device *device) return 0; } +static int hisi_sas_slave_configure(struct scsi_device *sdev) +{ + struct domain_device *dev = sdev_to_domain_dev(sdev); + int ret = sas_slave_configure(sdev); + + if (ret) + return ret; + if (!dev_is_sata(dev)) + sas_change_queue_depth(sdev, 64); + + return 0; +} + static void hisi_sas_scan_start(struct Scsi_Host *shost) { struct hisi_hba *hisi_hba = shost_priv(shost); @@ -990,7 +1003,7 @@ static struct scsi_host_template hisi_sas_sht = { .name = DRV_NAME, .queuecommand = sas_queuecommand, .target_alloc = sas_target_alloc, - .slave_configure = sas_slave_configure, + .slave_configure = hisi_sas_slave_configure, .scan_finished = hisi_sas_scan_finished, .scan_start = hisi_sas_scan_start, .change_queue_depth = sas_change_queue_depth,