From: Lech Perczak <lech.perczak@gmail.com>
Date: Thu, 16 Nov 2023 16:30:11 +0000 (+0100)
Subject: ath79: fortinet-fap-221-b: convert to nvmem-layout
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=32098554d911f092b9779e4768bf6d819d850bb5;p=openwrt%2Fstaging%2Flinusw.git

ath79: fortinet-fap-221-b: convert to nvmem-layout

Now that MAC address parser supports the hex format (without
delimiters), use the canonical MAC address stored in U-boot partition.
Get rid of the userspace adjustments which are no longer necessary.
While at that, move the mac-base to the common part, as it is again
exactly the same in both models.

And convert ART partition too - keep that one separate, as calibration
data length differs between the models.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
---

diff --git a/target/linux/ath79/dts/ar9344_fortinet_fap-221-b.dts b/target/linux/ath79/dts/ar9344_fortinet_fap-221-b.dts
index b78a588f5c..0cad9b76d1 100644
--- a/target/linux/ath79/dts/ar9344_fortinet_fap-221-b.dts
+++ b/target/linux/ath79/dts/ar9344_fortinet_fap-221-b.dts
@@ -6,6 +6,10 @@
 	compatible = "fortinet,fap-221-b", "qca,ar9344";
 	model = "Fortinet FAP-221-B";
 
+	aliases {
+		label-mac-device = <&eth0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -51,25 +55,34 @@
 &ath9k {
 	ieee80211-freq-limit = <2402000 2482000>;
 
-	nvmem-cells = <&calibration_pcie>;
-	nvmem-cell-names = "calibration";
+	nvmem-cells = <&calibration_pcie>, <&macaddr_uboot_3ff80 8>;
+	nvmem-cell-names = "calibration", "mac-address";
+};
+
+&eth0 {
+	nvmem-cells = <&macaddr_uboot_3ff80 0>;
+	nvmem-cell-names = "mac-address";
 };
 
 &wmac {
 	ieee80211-freq-limit = <2402000 2482000 4900000 5990000>;
 
-	nvmem-cells = <&calibration_wmac>;
-	nvmem-cell-names = "calibration";
+	nvmem-cells = <&calibration_wmac>, <&macaddr_uboot_3ff80 1>;
+	nvmem-cell-names = "calibration", "mac-address";
 };
 
 &art {
-	compatible = "nvmem-cells";
+	nvmem-layout {
+		compatible = "fixed-layout";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-	calibration_wmac: calibration@1000 {
-		reg = <0x1000 0x440>;
-	};
+		calibration_wmac: calibration@1000 {
+			reg = <0x1000 0x440>;
+		};
 
-	calibration_pcie: calibration@5000 {
-		reg = <0x5000 0x440>;
+		calibration_pcie: calibration@5000 {
+			reg = <0x5000 0x440>;
+		};
 	};
 };
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index cdea3b5f67..b74a7ff6b4 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -726,10 +726,6 @@ ath79_setup_macs()
 	enterasys,ws-ap3705i)
 		label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
 		;;
-	fortinet,fap-221-b)
-		lan_mac=$(mtd_get_mac_text u-boot 0x3ff80 12)
-		label_mac=$lan_mac
-		;;
 	hak5,lan-turtle|\
 	hak5,packet-squirrel)
 		label_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index ccff35e5c6..42b69d2ca0 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -47,9 +47,6 @@ case "$board" in
 	engenius,esr900)
 		macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" "$PHYNBR" > /sys${DEVPATH}/macaddress
 		;;
-	fortinet,fap-221-b)
-		macaddr_add "$(mtd_get_mac_text u-boot 0x3ff80 12)" $((PHYNBR*7+1)) > /sys${DEVPATH}/macaddress
-		;;
 	iodata,wn-ac1600dgr)
 		# There is no eeprom data for 5 GHz wlan in "art" partition
 		# which would allow to patch the macaddress
diff --git a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
index 8b39a17eb0..76f4b93a35 100644
--- a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
+++ b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
@@ -25,9 +25,6 @@ preinit_set_mac_address() {
 	siemens,ws-ap3610)
 		ip link set dev eth0 address $(mtd_get_mac_ascii cfg1 ethaddr)
 		;;
-	fortinet,fap-221-b)
-		ip link set dev eth0 address $(mtd_get_mac_text u-boot 0x3ff80 12)
-		;;
 	moxa,awk-1137c)
 		ip link set dev eth0 address $(mtd_get_mac_ascii u-boot-env mac_addr)
 		;;