From: Kim, Milo <Milo.Kim@ti.com>
Date: Fri, 23 Mar 2012 22:02:09 +0000 (-0700)
Subject: drivers/leds/leds-lp5521.c: redefinition of register bits
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=32a2f747ddf58b0f9ad786c4f3853b1ca7750cf9;p=openwrt%2Fstaging%2Fblogic.git

drivers/leds/leds-lp5521.c: redefinition of register bits

For better readability, values of LP5521_REG_ENABLE register were
redefined= .  Additional definitions: LP5521_ENABLE_DEFAULT and
LP5521_ENABLE_RUN_PROGRAM= .

Use definition rather than hard code value.
: 0x3F -> 'LP5521_CMD_DIRECT'

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---

diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 007c7c921e7e..de7b8fe676df 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -81,6 +81,10 @@
 #define LP5521_MASTER_ENABLE		0x40	/* Chip master enable */
 #define LP5521_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */
 #define LP5521_EXEC_RUN			0x2A
+#define LP5521_ENABLE_DEFAULT	\
+	(LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)
+#define LP5521_ENABLE_RUN_PROGRAM	\
+	(LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN)
 
 /* Status */
 #define LP5521_EXT_CLK_USED		0x08
@@ -237,7 +241,7 @@ static int lp5521_configure(struct i2c_client *client)
 	lp5521_init_engine(chip);
 
 	/* Set all PWMs to direct control mode */
-	ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
+	ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
 
 	cfg = chip->pdata->update_config ?
 		: (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
@@ -250,8 +254,7 @@ static int lp5521_configure(struct i2c_client *client)
 
 	/* Set engines are set to run state when OP_MODE enables engines */
 	ret |= lp5521_write(client, LP5521_REG_ENABLE,
-			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
-			LP5521_EXEC_RUN);
+			LP5521_ENABLE_RUN_PROGRAM);
 	/* enable takes 500us. 1 - 2 ms leaves some margin */
 	usleep_range(1000, 2000);
 
@@ -302,8 +305,7 @@ static int lp5521_detect(struct i2c_client *client)
 	int ret;
 	u8 buf;
 
-	ret = lp5521_write(client, LP5521_REG_ENABLE,
-			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+	ret = lp5521_write(client, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT);
 	if (ret)
 		return ret;
 	/* enable takes 500us. 1 - 2 ms leaves some margin */
@@ -311,7 +313,7 @@ static int lp5521_detect(struct i2c_client *client)
 	ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
 	if (ret)
 		return ret;
-	if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM))
+	if (buf != LP5521_ENABLE_DEFAULT)
 		return -ENODEV;
 
 	return 0;
@@ -576,8 +578,7 @@ static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip)
 		return;
 
 	if (mode == PATTERN_OFF) {
-		lp5521_write(cl, LP5521_REG_ENABLE,
-			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+		lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT);
 		usleep_range(1000, 2000);
 		lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
 	} else {
@@ -599,9 +600,7 @@ static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip)
 
 		lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN);
 		usleep_range(1000, 2000);
-		lp5521_write(cl, LP5521_REG_ENABLE,
-			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
-			LP5521_EXEC_RUN);
+		lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM);
 	}
 }