From: Jarod Wilson Date: Fri, 24 May 2019 13:49:28 +0000 (-0400) Subject: bonding/802.3ad: fix slave link initialization transition states X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=334031219a84b9994594015aab85ed7754c80176;p=openwrt%2Fstaging%2Fblogic.git bonding/802.3ad: fix slave link initialization transition states Once in a while, with just the right timing, 802.3ad slaves will fail to properly initialize, winding up in a weird state, with a partner system mac address of 00:00:00:00:00:00. This started happening after a fix to properly track link_failure_count tracking, where an 802.3ad slave that reported itself as link up in the miimon code, but wasn't able to get a valid speed/duplex, started getting set to BOND_LINK_FAIL instead of BOND_LINK_DOWN. That was the proper thing to do for the general "my link went down" case, but has created a link initialization race that can put the interface in this odd state. The simple fix is to instead set the slave link to BOND_LINK_DOWN again, if the link has never been up (last_link_up == 0), so the link state doesn't bounce from BOND_LINK_DOWN to BOND_LINK_FAIL -- it hasn't failed in this case, it simply hasn't been up yet, and this prevents the unnecessary state change from DOWN to FAIL and getting stuck in an init failure w/o a partner mac. Fixes: ea53abfab960 ("bonding/802.3ad: fix link_failure_count tracking") CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: "David S. Miller" CC: netdev@vger.kernel.org Tested-by: Heesoon Kim Signed-off-by: Jarod Wilson Acked-by: Jay Vosburgh Signed-off-by: David S. Miller --- diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 062fa7e3af4c..407f4095a37a 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3122,13 +3122,18 @@ static int bond_slave_netdev_event(unsigned long event, case NETDEV_CHANGE: /* For 802.3ad mode only: * Getting invalid Speed/Duplex values here will put slave - * in weird state. So mark it as link-fail for the time - * being and let link-monitoring (miimon) set it right when - * correct speeds/duplex are available. + * in weird state. Mark it as link-fail if the link was + * previously up or link-down if it hasn't yet come up, and + * let link-monitoring (miimon) set it right when correct + * speeds/duplex are available. */ if (bond_update_speed_duplex(slave) && - BOND_MODE(bond) == BOND_MODE_8023AD) - slave->link = BOND_LINK_FAIL; + BOND_MODE(bond) == BOND_MODE_8023AD) { + if (slave->last_link_up) + slave->link = BOND_LINK_FAIL; + else + slave->link = BOND_LINK_DOWN; + } if (BOND_MODE(bond) == BOND_MODE_8023AD) bond_3ad_adapter_speed_duplex_changed(slave);