From: Denis Drozdov Date: Wed, 8 Aug 2018 23:23:48 +0000 (-0700) Subject: net/mlx5: Use max_num_eqs for calculation of required MSIX vectors X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=342ac8448f1fb213908656ae5581d0f37a5954e8;p=openwrt%2Fstaging%2Fblogic.git net/mlx5: Use max_num_eqs for calculation of required MSIX vectors New firmware has defined new HCA capability field called "max_num_eqs", that is the number of available EQs after subtracting reserved FW EQs. Before this capability the FW reported the EQ number in "log_max_eqs", the reported value also contained FW reserved EQs, but the driver might be failing to load on 320 cpus systems due to the fact that FW reserved EQs were not available to the driver. Now the driver has to obtain max_num_eqs value from new FW to get real number of EQs available. Signed-off-by: Denis Drozdov Reviewed-by: Alex Vesker Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 03b9c6733eed..cf3e4a659052 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -323,7 +323,9 @@ static int mlx5_alloc_irq_vectors(struct mlx5_core_dev *dev) { struct mlx5_priv *priv = &dev->priv; struct mlx5_eq_table *table = &priv->eq_table; - int num_eqs = 1 << MLX5_CAP_GEN(dev, log_max_eq); + int num_eqs = MLX5_CAP_GEN(dev, max_num_eqs) ? + MLX5_CAP_GEN(dev, max_num_eqs) : + 1 << MLX5_CAP_GEN(dev, log_max_eq); int nvec; int err; diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 60c2308fe062..63e1ce4c4826 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -1133,7 +1133,10 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 general_obj_types[0x40]; - u8 reserved_at_440[0x40]; + u8 reserved_at_440[0x20]; + + u8 reserved_at_460[0x10]; + u8 max_num_eqs[0x10]; u8 reserved_at_480[0x3]; u8 log_max_l2_table[0x5];