From: Stijn Tintel Date: Fri, 22 Jun 2018 11:42:20 +0000 (+0300) Subject: mac80211: enable ath10k LED support by default X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=34e22653ac18b6ac7fd368ca47625f665808067f;p=openwrt%2Fstaging%2Fynezz.git mac80211: enable ath10k LED support by default Commit 61d57a2f88b90ba951012e66c7c6fae9234c97b4 adds ath10k LED support, but doesn't add an option to actually enable it. After enabling this option, a LED named ath10k-phy0 appears in sysfs, and a trigger can be assigned to it. Since 60deb3cdef4a the default set trigger is the tpt one. Enable it by default, as most devices using ath10k chips shouldn't be severely space-constrained. There are likely many devices that can benefit from having it enabled, like my testing device. Before: text data bss dec hex filename 245311 8899 16 254226 3e112 ath10k_core.ko After: text data bss dec hex filename 245979 8899 16 254894 3e3ae ath10k_core.ko Tested on a D-Link DAP-2695-A1 (ar71xx). Signed-off-by: Stijn Tintel --- diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index 127251d749..3c88e451f1 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -74,6 +74,7 @@ PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_RTLWIFI_DEBUG \ CONFIG_ATH9K_SUPPORT_PCOEM \ CONFIG_ATH9K_TX99 \ + CONFIG_ATH10K_LEDS \ CONFIG_ATH10K_THERMAL \ CONFIG_ATH_USER_REGD \ @@ -342,6 +343,11 @@ endef define KernelPackage/ath10k/config + config ATH10K_LEDS + bool "Enable LED support" + default y + depends on PACKAGE_kmod-ath10k + config ATH10K_THERMAL bool "Enable thermal sensors and throttling support" depends on PACKAGE_kmod-ath10k @@ -1635,6 +1641,7 @@ config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99 config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR +config-$(CONFIG_ATH10K_LEDS) += ATH10K_LEDS config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL config-$(call config_package,ath9k-htc) += ATH9K_HTC