From: Chris Packham Date: Thu, 16 Feb 2017 08:50:36 +0000 (+1300) Subject: ARM: dts: armada-xp-98dx3236: combine dfx server nodes X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=35a647f12c843b1e507e0956398138ba3d92c338;p=openwrt%2Fstaging%2Fblogic.git ARM: dts: armada-xp-98dx3236: combine dfx server nodes Rather than having a separate node for the dfx server add a reg property to the parent node. This give some compatibility with the Marvell supplied SDK. As no upstream driver currently exists for this block and support for this SoC is still quite fresh in the kernel it should not be necessary to retain a backwards compatible binding. Signed-off-by: Chris Packham Acked-by: Rob Herring Signed-off-by: Gregory CLEMENT --- diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt index 5fbab29718e8..c329608fa887 100644 --- a/Documentation/devicetree/bindings/net/marvell,prestera.txt +++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt @@ -32,19 +32,16 @@ DFX Server bindings ------------------- Required properties: -- compatible: must be "marvell,dfx-server" +- compatible: must be "marvell,dfx-server", "simple-bus" +- ranges: describes the address mapping of a memory-mapped bus. - reg: address and length of the register set for the device. Example: -dfx-registers { - compatible = "simple-bus"; +dfx-server { + compatible = "marvell,dfx-server", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; - - dfx: dfx@0 { - compatible = "marvell,dfx-server"; - reg = <0 0x100000>; - }; + reg = ; }; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index f6a03dcee5ef..7eaa7da84770 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -195,11 +195,12 @@ }; }; - dfxr: dfx-registers@ac000000 { - compatible = "simple-bus"; + dfx: dfx-server@ac000000 { + compatible = "marvell,dfx-server", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; + reg = ; dfx_coredivclk: corediv-clock@f8268 { compatible = "marvell,mv98dx3236-corediv-clock"; @@ -208,11 +209,6 @@ clocks = <&mainpll>; clock-output-names = "nand"; }; - - dfx: dfx@0 { - compatible = "marvell,dfx-server"; - reg = <0 0x100000>; - }; }; switch: switch@a8000000 {