From: Aleksandr V. Piskunov Date: Sun, 1 Jul 2018 13:40:37 +0000 (+0300) Subject: ipq806x: fix numbering for Netgear R7800 LAN ports X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=36fea5a7b961132695918337f1c37b0e9a93978a;p=openwrt%2Fstaging%2Fneocturne.git ipq806x: fix numbering for Netgear R7800 LAN ports Netgear R7800 switch LAN ports are numbered backwards in LuCI, i.e. numbering is not corresponding to the actual physical port labels, patch fixes that. Signed-off-by: Aleksandr V. Piskunov [merged with existing board using the same config] Signed-off-by: Hannu Nyman --- diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index f5daf62653..786c6f70e1 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -16,7 +16,6 @@ compex,wpq864 |\ netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ -netgear,r7800 |\ qcom,ipq8064-ap148 |\ tplink,vr2600v) ucidef_add_switch "switch0" \ @@ -33,15 +32,16 @@ nec,wg2600hp) ucidef_add_switch "switch0" \ "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0" ;; +netgear,r7800 |\ +tplink,c2600) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" + ;; qcom,ipq8064-db149) ucidef_set_interface_lan "eth1 eth2 eth3" ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0" ;; -tplink,c2600) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" - ;; zyxel,nbg6817) hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ucidef_add_switch "switch0" \