From: Rafał Miłecki Date: Tue, 20 Feb 2024 10:44:24 +0000 (+0100) Subject: mediatek: filogic: reorder mt7981 DT properties X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=388bc4b365b8690c408986df47f19dbf4d7f17d5;p=openwrt%2Fstaging%2Fneocturne.git mediatek: filogic: reorder mt7981 DT properties Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981.dtsi b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981.dtsi index 070885715b..cb7b5d7f9d 100644 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981.dtsi +++ b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981.dtsi @@ -27,17 +27,17 @@ #size-cells = <0>; cpu@0 { - device_type = "cpu"; compatible = "arm,cortex-a53"; - enable-method = "psci"; reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; }; cpu@1 { - device_type = "cpu"; compatible = "arm,cortex-a53"; - enable-method = "psci"; reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; }; }; @@ -50,9 +50,9 @@ clk40m: oscillator@0 { compatible = "fixed-clock"; - #clock-cells = <0>; clock-frequency = <40000000>; clock-output-names = "clkxtal"; + #clock-cells = <0>; }; psci { @@ -78,9 +78,9 @@ }; reserved-memory { + ranges; #address-cells = <2>; #size-cells = <2>; - ranges; /* 64 KiB reserved for ramoops/pstore */ ramoops@42ff0000 { @@ -119,13 +119,12 @@ gic: interrupt-controller@c000000 { compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - interrupt-controller; reg = <0 0x0c000000 0 0x40000>, /* GICD */ <0 0x0c080000 0 0x200000>; /* GICR */ - + interrupt-parent = <&gic>; interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; }; consys: consys@10000000 { @@ -169,13 +168,13 @@ pwm: pwm@10048000 { compatible = "mediatek,mt7981-pwm"; reg = <0 0x10048000 0 0x1000>; - #pwm-cells = <2>; clocks = <&infracfg CLK_INFRA_PWM_STA>, <&infracfg CLK_INFRA_PWM_HCK>, <&infracfg CLK_INFRA_PWM1_CK>, <&infracfg CLK_INFRA_PWM2_CK>, <&infracfg CLK_INFRA_PWM3_CK>; clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; + #pwm-cells = <2>; }; sgmiisys0: syscon@10060000 { @@ -285,8 +284,6 @@ spi2: spi@11009000 { compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; - #address-cells = <1>; - #size-cells = <0>; reg = <0 0x11009000 0 0x100>; interrupts = ; clocks = <&topckgen CLK_TOP_CB_M_D2>, @@ -294,13 +291,13 @@ <&infracfg CLK_INFRA_SPI2_CK>, <&infracfg CLK_INFRA_SPI2_HCK_CK>; clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; spi0: spi@1100a000 { compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; - #address-cells = <1>; - #size-cells = <0>; reg = <0 0x1100a000 0 0x100>; interrupts = ; clocks = <&topckgen CLK_TOP_CB_M_D2>, @@ -309,13 +306,13 @@ <&infracfg CLK_INFRA_SPI0_HCK_CK>; clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; spi1: spi@1100b000 { compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; - #address-cells = <1>; - #size-cells = <0>; reg = <0 0x1100b000 0 0x100>; interrupts = ; clocks = <&topckgen CLK_TOP_CB_M_D2>, @@ -323,21 +320,23 @@ <&infracfg CLK_INFRA_SPI1_CK>, <&infracfg CLK_INFRA_SPI1_HCK_CK>; clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; thermal: thermal@1100c800 { - #thermal-sensor-cells = <1>; compatible = "mediatek,mt7981-thermal", "mediatek,mt7986-thermal"; reg = <0 0x1100c800 0 0x800>; interrupts = ; clocks = <&infracfg CLK_INFRA_THERM_CK>, <&infracfg CLK_INFRA_ADC_26M_CK>; clock-names = "therm", "auxadc"; - mediatek,auxadc = <&auxadc>; - mediatek,apmixedsys = <&apmixedsys>; nvmem-cells = <&thermal_calibration>; nvmem-cell-names = "calibration-data"; + #thermal-sensor-cells = <1>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; }; auxadc: adc@1100d000 { @@ -421,16 +420,13 @@ pcie: pcie@11280000 { compatible = "mediatek,mt7981-pcie", "mediatek,mt7986-pcie"; - device_type = "pci"; reg = <0 0x11280000 0 0x4000>; reg-names = "pcie-mac"; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; - status = "disabled"; + device_type = "pci"; + interrupts = ; + bus-range = <0x00 0xff>; clocks = <&infracfg CLK_INFRA_IPCIE_CK>, <&infracfg CLK_INFRA_IPCIE_PIPE_CK>, @@ -440,16 +436,19 @@ phys = <&u3port0 PHY_TYPE_PCIE>; phy-names = "pcie-phy"; - #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>, <0 0 0 3 &pcie_intc 2>, <0 0 0 4 &pcie_intc 3>; + #interrupt-cells = <1>; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; pcie_intc: interrupt-controller { interrupt-controller; - #address-cells = <0>; #interrupt-cells = <1>; + #address-cells = <0>; }; }; @@ -528,9 +527,9 @@ usb_phy: usb-phy@11e10000 { compatible = "mediatek,mt7981", "mediatek,generic-tphy-v2"; + ranges = <0 0 0x11e10000 0x1700>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0x11e10000 0x1700>; status = "disabled"; u2port0: usb-phy@0 { @@ -583,13 +582,13 @@ }; ethsys: syscon@15000000 { - #address-cells = <1>; - #size-cells = <1>; compatible = "mediatek,mt7981-ethsys", "syscon"; reg = <0 0x15000000 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; }; wed: wed@15010000 { @@ -653,8 +652,8 @@ #size-cells = <0>; int_gbe_phy: ethernet-phy@0 { - reg = <0>; compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; phy-mode = "gmii"; phy-is-integrated; nvmem-cells = <&phy_calibration>; @@ -719,6 +718,9 @@ wifi: wifi@18000000 { compatible = "mediatek,mt7981-wmac"; + reg = <0 0x18000000 0 0x1000000>, + <0 0x10003000 0 0x1000>, + <0 0x11d10000 0 0x1000>; resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>; reset-names = "consys"; pinctrl-0 = <&wifi_dbdc_pins>; @@ -726,9 +728,6 @@ clocks = <&topckgen CLK_TOP_NETSYS_MCU_SEL>, <&topckgen CLK_TOP_AP2CNN_HOST_SEL>; clock-names = "mcu", "ap2conn"; - reg = <0 0x18000000 0 0x1000000>, - <0 0x10003000 0 0x1000>, - <0 0x11d10000 0 0x1000>; interrupts = , , ,