From: Xenia Ragiadakou <burzalodowa@gmail.com> Date: Wed, 4 Sep 2013 14:24:45 +0000 (+0300) Subject: usbcore: check usb device's state before sending a Set SEL control transfer X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=38d7f6885164b114fdfae84bc18397e8fced9b00;p=openwrt%2Fstaging%2Fblogic.git usbcore: check usb device's state before sending a Set SEL control transfer Set SEL control urbs cannot be sent to a device in unconfigured state. This patch adds a check in usb_req_set_sel() to ensure the usb device's state is USB_STATE_CONFIGURED. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: Martin MOKREJS <mmokrejs@gmail.com> Suggested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> --- diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index dde4c83516a1..e6b682c6c236 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3426,6 +3426,9 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state) unsigned long long u2_pel; int ret; + if (udev->state != USB_STATE_CONFIGURED) + return 0; + /* Convert SEL and PEL stored in ns to us */ u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);