From: Manuel Lauss Date: Thu, 24 Jul 2008 04:29:56 +0000 (-0700) Subject: spi: au1550_spi: proper platform device X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3a93a159c61e38a12f7ecbb3a25cf3f012abcf7a;p=openwrt%2Fstaging%2Fblogic.git spi: au1550_spi: proper platform device Remove the Au1550 resource table and instead extract MMIO/IRQ/DMA resources from platform resource information like any well-behaved platform driver. Signed-off-by: Manuel Lauss Signed-off-by: Jan Nikitenko Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index 072c4a595334..3860dd2fa5d9 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -81,6 +82,7 @@ struct au1550_spi { struct spi_master *master; struct device *dev; struct au1550_spi_info *pdata; + struct resource *ioarea; }; @@ -96,6 +98,8 @@ static dbdev_tab_t au1550_spi_mem_dbdev = .dev_intpolarity = 0 }; +static int ddma_memid; /* id to above mem dma device */ + static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw); @@ -732,6 +736,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev) { struct au1550_spi *hw; struct spi_master *master; + struct resource *r; int err = 0; master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi)); @@ -753,76 +758,64 @@ static int __init au1550_spi_probe(struct platform_device *pdev) goto err_no_pdata; } - platform_set_drvdata(pdev, hw); - - init_completion(&hw->master_done); - - hw->bitbang.master = hw->master; - hw->bitbang.setup_transfer = au1550_spi_setupxfer; - hw->bitbang.chipselect = au1550_spi_chipsel; - hw->bitbang.master->setup = au1550_spi_setup; - hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!r) { + dev_err(&pdev->dev, "no IRQ\n"); + err = -ENODEV; + goto err_no_iores; + } + hw->irq = r->start; + + hw->usedma = 0; + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (r) { + hw->dma_tx_id = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (r) { + hw->dma_rx_id = r->start; + if (usedma && ddma_memid) { + if (pdev->dev.dma_mask == NULL) + dev_warn(&pdev->dev, "no dma mask\n"); + else + hw->usedma = 1; + } + } + } - switch (hw->pdata->bus_num) { - case 0: - hw->irq = AU1550_PSC0_INT; - hw->regs = (volatile psc_spi_t *)PSC0_BASE_ADDR; - hw->dma_rx_id = DSCR_CMD0_PSC0_RX; - hw->dma_tx_id = DSCR_CMD0_PSC0_TX; - break; - case 1: - hw->irq = AU1550_PSC1_INT; - hw->regs = (volatile psc_spi_t *)PSC1_BASE_ADDR; - hw->dma_rx_id = DSCR_CMD0_PSC1_RX; - hw->dma_tx_id = DSCR_CMD0_PSC1_TX; - break; - case 2: - hw->irq = AU1550_PSC2_INT; - hw->regs = (volatile psc_spi_t *)PSC2_BASE_ADDR; - hw->dma_rx_id = DSCR_CMD0_PSC2_RX; - hw->dma_tx_id = DSCR_CMD0_PSC2_TX; - break; - case 3: - hw->irq = AU1550_PSC3_INT; - hw->regs = (volatile psc_spi_t *)PSC3_BASE_ADDR; - hw->dma_rx_id = DSCR_CMD0_PSC3_RX; - hw->dma_tx_id = DSCR_CMD0_PSC3_TX; - break; - default: - dev_err(&pdev->dev, "Wrong bus_num of SPI\n"); - err = -ENOENT; - goto err_no_pdata; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no mmio resource\n"); + err = -ENODEV; + goto err_no_iores; } - if (request_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t), - pdev->name) == NULL) { + hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t), + pdev->name); + if (!hw->ioarea) { dev_err(&pdev->dev, "Cannot reserve iomem region\n"); err = -ENXIO; goto err_no_iores; } - - if (usedma) { - if (pdev->dev.dma_mask == NULL) - dev_warn(&pdev->dev, "no dma mask\n"); - else - hw->usedma = 1; + hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t)); + if (!hw->regs) { + dev_err(&pdev->dev, "cannot ioremap\n"); + err = -ENXIO; + goto err_ioremap; } - if (hw->usedma) { - /* - * create memory device with 8 bits dev_devwidth - * needed for proper byte ordering to spi fifo - */ - int memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev); - if (!memid) { - dev_err(&pdev->dev, - "Cannot create dma 8 bit mem device\n"); - err = -ENXIO; - goto err_dma_add_dev; - } + platform_set_drvdata(pdev, hw); - hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(memid, + init_completion(&hw->master_done); + + hw->bitbang.master = hw->master; + hw->bitbang.setup_transfer = au1550_spi_setupxfer; + hw->bitbang.chipselect = au1550_spi_chipsel; + hw->bitbang.master->setup = au1550_spi_setup; + hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; + + if (hw->usedma) { + hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid, hw->dma_tx_id, NULL, (void *)hw); if (hw->dma_tx_ch == 0) { dev_err(&pdev->dev, @@ -841,7 +834,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev) hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id, - memid, NULL, (void *)hw); + ddma_memid, NULL, (void *)hw); if (hw->dma_rx_ch == 0) { dev_err(&pdev->dev, "Cannot allocate rx dma channel\n"); @@ -874,7 +867,7 @@ static int __init au1550_spi_probe(struct platform_device *pdev) goto err_no_irq; } - master->bus_num = hw->pdata->bus_num; + master->bus_num = pdev->id; master->num_chipselect = hw->pdata->num_chipselect; /* @@ -924,8 +917,11 @@ err_no_txdma_descr: au1xxx_dbdma_chan_free(hw->dma_tx_ch); err_no_txdma: -err_dma_add_dev: - release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t)); + iounmap((void __iomem *)hw->regs); + +err_ioremap: + release_resource(hw->ioarea); + kfree(hw->ioarea); err_no_iores: err_no_pdata: @@ -944,7 +940,9 @@ static int __exit au1550_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&hw->bitbang); free_irq(hw->irq, hw); - release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t)); + iounmap((void __iomem *)hw->regs); + release_resource(hw->ioarea); + kfree(hw->ioarea); if (hw->usedma) { au1550_spi_dma_rxtmp_free(hw); @@ -971,12 +969,24 @@ static struct platform_driver au1550_spi_drv = { static int __init au1550_spi_init(void) { + /* + * create memory device with 8 bits dev_devwidth + * needed for proper byte ordering to spi fifo + */ + if (usedma) { + ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev); + if (!ddma_memid) + printk(KERN_ERR "au1550-spi: cannot add memory" + "dbdma device\n"); + } return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe); } module_init(au1550_spi_init); static void __exit au1550_spi_exit(void) { + if (usedma && ddma_memid) + au1xxx_ddma_del_device(ddma_memid); platform_driver_unregister(&au1550_spi_drv); } module_exit(au1550_spi_exit); diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h index 40e6c489833a..08e1958e9410 100644 --- a/include/asm-mips/mach-au1x00/au1550_spi.h +++ b/include/asm-mips/mach-au1x00/au1550_spi.h @@ -6,7 +6,6 @@ #define _AU1550_SPI_H_ struct au1550_spi_info { - s16 bus_num; /* defines which PSC and IRQ to use */ u32 mainclk_hz; /* main input clock frequency of PSC */ u16 num_chipselect; /* number of chipselects supported */ void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);