From: Sonic Zhang Date: Mon, 1 Sep 2014 03:19:52 +0000 (+0800) Subject: gpio: mcp23s08 to support both device tree and platform data X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3af0dbd592fe0a92002f16e341519ba03e92adf7;p=openwrt%2Fstaging%2Fblogic.git gpio: mcp23s08 to support both device tree and platform data Device tree is not enabled in some architecture where gpio driver mcp23s08 is still required. v2-changes: - Parse device tree properties into platform data other than individual variables. v3-changes: - Use of_node in gpio_chip device structure, because the struct device * always has an of_node which is NULL when OF is not used. Signed-off-by: Sonic Zhang Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij --- diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ec27ec0be8c2..ec398bee7c60 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -806,7 +806,6 @@ config GPIO_MAX7301 config GPIO_MCP23S08 tristate "Microchip MCP23xxx I/O expander" - depends on OF_GPIO depends on (SPI_MASTER && !I2C) || I2C help SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 6f183d9b487e..8488e2fd307c 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -479,7 +479,7 @@ static int mcp23s08_irq_setup(struct mcp23s08 *mcp) mutex_init(&mcp->irq_lock); - mcp->irq_domain = irq_domain_add_linear(chip->of_node, chip->ngpio, + mcp->irq_domain = irq_domain_add_linear(chip->dev->of_node, chip->ngpio, &irq_domain_simple_ops, mcp); if (!mcp->irq_domain) return -ENODEV; @@ -581,7 +581,7 @@ done: static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, void *data, unsigned addr, unsigned type, - unsigned base, unsigned pullups) + struct mcp23s08_platform_data *pdata, int cs) { int status; bool mirror = false; @@ -635,7 +635,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, return -EINVAL; } - mcp->chip.base = base; + mcp->chip.base = pdata->base; mcp->chip.can_sleep = true; mcp->chip.dev = dev; mcp->chip.owner = THIS_MODULE; @@ -648,11 +648,9 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, if (status < 0) goto fail; - mcp->irq_controller = of_property_read_bool(mcp->chip.of_node, - "interrupt-controller"); + mcp->irq_controller = pdata->irq_controller; if (mcp->irq && mcp->irq_controller && (type == MCP_TYPE_017)) - mirror = of_property_read_bool(mcp->chip.of_node, - "microchip,irq-mirror"); + mirror = pdata->mirror; if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror) { /* mcp23s17 has IOCON twice, make sure they are in sync */ @@ -668,7 +666,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, } /* configure ~100K pullups */ - status = mcp->ops->write(mcp, MCP_GPPU, pullups); + status = mcp->ops->write(mcp, MCP_GPPU, pdata->chip[cs].pullups); if (status < 0) goto fail; @@ -768,25 +766,29 @@ MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match); static int mcp230xx_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct mcp23s08_platform_data *pdata; + struct mcp23s08_platform_data *pdata, local_pdata; struct mcp23s08 *mcp; - int status, base, pullups; + int status; const struct of_device_id *match; match = of_match_device(of_match_ptr(mcp23s08_i2c_of_match), &client->dev); - pdata = dev_get_platdata(&client->dev); - if (match || !pdata) { - base = -1; - pullups = 0; + if (match) { + pdata = &local_pdata; + pdata->base = -1; + pdata->chip[0].pullups = 0; + pdata->irq_controller = of_property_read_bool( + client->dev.of_node, + "interrupt-controller"); + pdata->mirror = of_property_read_bool(client->dev.of_node, + "microchip,irq-mirror"); client->irq = irq_of_parse_and_map(client->dev.of_node, 0); } else { - if (!gpio_is_valid(pdata->base)) { + pdata = dev_get_platdata(&client->dev); + if (!pdata || !gpio_is_valid(pdata->base)) { dev_dbg(&client->dev, "invalid platform data\n"); return -EINVAL; } - base = pdata->base; - pullups = pdata->chip[0].pullups; } mcp = kzalloc(sizeof(*mcp), GFP_KERNEL); @@ -795,7 +797,7 @@ static int mcp230xx_probe(struct i2c_client *client, mcp->irq = client->irq; status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr, - id->driver_data, base, pullups); + id->driver_data, pdata, 0); if (status) goto fail; @@ -863,14 +865,12 @@ static void mcp23s08_i2c_exit(void) { } static int mcp23s08_probe(struct spi_device *spi) { - struct mcp23s08_platform_data *pdata; + struct mcp23s08_platform_data *pdata, local_pdata; unsigned addr; int chips = 0; struct mcp23s08_driver_data *data; int status, type; - unsigned base = -1, - ngpio = 0, - pullups[ARRAY_SIZE(pdata->chip)]; + unsigned ngpio = 0; const struct of_device_id *match; u32 spi_present_mask = 0; @@ -893,11 +893,18 @@ static int mcp23s08_probe(struct spi_device *spi) return -ENODEV; } + pdata = &local_pdata; + pdata->base = -1; for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { - pullups[addr] = 0; + pdata->chip[addr].pullups = 0; if (spi_present_mask & (1 << addr)) chips++; } + pdata->irq_controller = of_property_read_bool( + spi->dev.of_node, + "interrupt-controller"); + pdata->mirror = of_property_read_bool(spi->dev.of_node, + "microchip,irq-mirror"); } else { type = spi_get_device_id(spi)->driver_data; pdata = dev_get_platdata(&spi->dev); @@ -917,10 +924,7 @@ static int mcp23s08_probe(struct spi_device *spi) return -EINVAL; } spi_present_mask |= 1 << addr; - pullups[addr] = pdata->chip[addr].pullups; } - - base = pdata->base; } if (!chips) @@ -938,13 +942,13 @@ static int mcp23s08_probe(struct spi_device *spi) chips--; data->mcp[addr] = &data->chip[chips]; status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi, - 0x40 | (addr << 1), type, base, - pullups[addr]); + 0x40 | (addr << 1), type, pdata, + addr); if (status < 0) goto fail; - if (base != -1) - base += (type == MCP_TYPE_S17) ? 16 : 8; + if (pdata->base != -1) + pdata->base += (type == MCP_TYPE_S17) ? 16 : 8; ngpio += (type == MCP_TYPE_S17) ? 16 : 8; } data->ngpio = ngpio; diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h index 2d676d5aaa89..aa07d7b32568 100644 --- a/include/linux/spi/mcp23s08.h +++ b/include/linux/spi/mcp23s08.h @@ -22,4 +22,22 @@ struct mcp23s08_platform_data { * base to base+15 (or base+31 for s17 variant). */ unsigned base; + /* Marks the device as a interrupt controller. + * NOTE: The interrupt functionality is only supported for i2c + * versions of the chips. The spi chips can also do the interrupts, + * but this is not supported by the linux driver yet. + */ + bool irq_controller; + + /* Sets the mirror flag in the IOCON register. Devices + * with two interrupt outputs (these are the devices ending with 17 and + * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and + * IO 8-15 are bank 2. These chips have two different interrupt outputs: + * One for bank 1 and another for bank 2. If irq-mirror is set, both + * interrupts are generated regardless of the bank that an input change + * occurred on. If it is not set, the interrupt are only generated for + * the bank they belong to. + * On devices with only one interrupt output this property is useless. + */ + bool mirror; };