From: Koen Vandeputte <koen.vandeputte@ncentric.com>
Date: Mon, 29 May 2017 09:58:01 +0000 (+0200)
Subject: imx6: disable UART dma
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3b4241071dd4;p=openwrt%2Fstaging%2Fnbd.git

imx6: disable UART dma

Fixes these prints on boot:

[   13.785600] imx-uart 2020000.serial: DMA transaction error.
[   13.793134] imx-uart 2020000.serial: DMA transaction error.
[   13.798721] imx-uart 2020000.serial: DMA transaction error.

Based on following upstream patch by Tim Harvey (Gateworks):

https://github.com/Gateworks/openwrt/commit/80a01b6582f94c4547f39d3a25e0a1e9b6eb9877

TX complete DMA messages are getting missed.
This is also currently an issue in mainline.
For now we will disable DMA in serial/imx.c.

This resolves an issue encountered with RS485 transmit.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
---

diff --git a/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch b/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch
new file mode 100644
index 0000000000..6abbb93301
--- /dev/null
+++ b/target/linux/imx6/patches-4.9/210-disable-uart-dma.patch
@@ -0,0 +1,23 @@
+Based on following upstream patch by Tim Harvey (Gateworks):
+
+https://github.com/Gateworks/openwrt/commit/80a01b6582f94c4547f39d3a25e0a1e9b6eb9877
+
+TX complete DMA messages are getting missed.
+This is also currently an issue in mainline.
+For now we will disable DMA in serial/imx.c.
+
+This resolves an issue encountered with RS485 transmit.
+
+--- a/drivers/tty/serial/imx.c
++++ b/drivers/tty/serial/imx.c
+@@ -1268,10 +1268,6 @@ static int imx_startup(struct uart_port
+ 
+ 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
+ 
+-	/* Can we enable the DMA support? */
+-	if (!uart_console(port) && !sport->dma_is_inited)
+-		imx_uart_dma_init(sport);
+-
+ 	spin_lock_irqsave(&sport->port.lock, flags);
+ 	/* Reset fifo's and state machines */
+ 	i = 100;