From: Rafał Miłecki Date: Wed, 17 Jan 2024 21:20:15 +0000 (+0100) Subject: mediatek: filogic: replace built-in Aquantia driver with module X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3bd79e6136a572b73536e9216cc199399fb33b30;p=openwrt%2Fstaging%2Flinusw.git mediatek: filogic: replace built-in Aquantia driver with module Some Aquantia PHYs (e.g. AQR113C) require firmware to be uploaded by host system. With built-in drivers this doesn't work in OpenWrt / embeddded as filesystem isn't available during PHY probe. That results in delays like: [ 1.588068] Aquantia AQR113C mdio-bus:00: Falling back to sysfs fallback for: Rhe-05.06-Candidate9-AQR_Mediatek_23B_P5_ID45824_LCLVER1.cld [ 64.526387] Aquantia AQR113C mdio-bus:00: failed to find FW file Rhe-05.06-Candidate9-AQR_Mediatek_23B_P5_ID45824_LCLVER1.cld (-110) Switch to module to postpone PHY probe to init state. Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/mediatek/filogic/config-6.1 b/target/linux/mediatek/filogic/config-6.1 index 9e27cd830c..34aa2e76b6 100644 --- a/target/linux/mediatek/filogic/config-6.1 +++ b/target/linux/mediatek/filogic/config-6.1 @@ -1,6 +1,5 @@ CONFIG_64BIT=y # CONFIG_AHCI_MTK is not set -CONFIG_AQUANTIA_PHY=y CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y diff --git a/target/linux/mediatek/filogic/target.mk b/target/linux/mediatek/filogic/target.mk index dd4c4c1448..182b229db2 100644 --- a/target/linux/mediatek/filogic/target.mk +++ b/target/linux/mediatek/filogic/target.mk @@ -2,7 +2,7 @@ ARCH:=aarch64 SUBTARGET:=filogic BOARDNAME:=Filogic 8x0 (MT798x) CPU_TYPE:=cortex-a53 -DEFAULT_PACKAGES += kmod-crypto-hw-safexcel kmod-mt7915e wpad-basic-mbedtls uboot-envtools +DEFAULT_PACKAGES += kmod-phy-aquantia kmod-crypto-hw-safexcel kmod-mt7915e wpad-basic-mbedtls uboot-envtools KERNELNAME:=Image dtbs define Target/Description