From: Rafał Miłecki Date: Mon, 4 Jul 2016 09:48:10 +0000 (+0200) Subject: Revert "bcm53xx: use uncompressed zImages" X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3c014dc3066bf03781b971237c591a8db7fc85bc;p=openwrt%2Fstaging%2Fzorun.git Revert "bcm53xx: use uncompressed zImages" This reverts commit b3be33f135f447d56ef9a5461e7e675d5cc35730. CFE is known to fail in some non-standard cases, e.g. when using kernel or format different that what was tested by Broadcom. This kernel change triggered some problem with booting OpenWrt kernel stored in Seama. As long as Seama checksum was covering enough data, it was working fine. We need to change it however, because calculating MD5 over part of UBI containing SquashFS is unsafe. UBI may move PEBs depending on flash wearing level which would break CFE booting the image. For some reason this kernel change was breaking CFE. Calculating MD5 over 0x47ffc0 B data or less (there is 0x40 B long header) was stopping booting process at: Starting program at 0x00008000 As our kernel is usually 0x3fffc0 B it was affected by this problem. Reverting this change fixes sysupgrade (which already uses kernel size for MD5 calculation) and will allow us to adjust "fixseama" command call on the first boot. Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/bcm53xx/config-4.4 b/target/linux/bcm53xx/config-4.4 index 5611cfe0d4..f360211928 100644 --- a/target/linux/bcm53xx/config-4.4 +++ b/target/linux/bcm53xx/config-4.4 @@ -200,8 +200,6 @@ CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_WORK=y -CONFIG_KERNEL_CAT=y -# CONFIG_KERNEL_XZ is not set CONFIG_LIBFDT=y CONFIG_LOCK_SPIN_ON_OWNER=y CONFIG_LZO_COMPRESS=y