From: Zoltan HERPAI Date: Tue, 16 Apr 2024 21:17:13 +0000 (+0200) Subject: kernel/sunxi: Create kernel files for v6.6 (from v6.1) X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3c69b9a8183466a3ca7054131288b66752092cb3;p=openwrt%2Fstaging%2Fneocturne.git kernel/sunxi: Create kernel files for v6.6 (from v6.1) This is an automatically generated commit. When doing `git bisect`, consider `git bisect --skip`. Signed-off-by: Zoltan HERPAI --- diff --git a/target/linux/sunxi/config-6.1 b/target/linux/sunxi/config-6.1 deleted file mode 100644 index a76834c13a..0000000000 --- a/target/linux/sunxi/config-6.1 +++ /dev/null @@ -1,524 +0,0 @@ -# CONFIG_AHCI_SUNXI is not set -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_FORCE_MAX_ORDER=11 -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=416 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SUNXI_MC_SMP=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_CCI=y -CONFIG_ARM_CCI400_COMMON=y -CONFIG_ARM_CCI400_PORT_CTRL=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_ERRATA_643719=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_LPAE=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_PSCI=y -CONFIG_ARM_PSCI_FW=y -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_AXP20X_POWER=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_PM=y -CONFIG_BOUNCE=y -CONFIG_CACHE_L2X0=y -CONFIG_CAN=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLK_SUNXI=y -CONFIG_CLK_SUNXI_CLOCKS=y -CONFIG_CLK_SUNXI_PRCM_SUN6I=y -CONFIG_CLK_SUNXI_PRCM_SUN8I=y -CONFIG_CLK_SUNXI_PRCM_SUN9I=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONNECTOR=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_CRCT10DIF_ARM_CE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_ALLWINNER=y -CONFIG_CRYPTO_DEV_SUN4I_SS=y -# CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG is not set -CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y -# CONFIG_CRYPTO_DEV_SUN8I_CE is not set -# CONFIG_CRYPTO_DEV_SUN8I_SS is not set -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_LIB_DES=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA1=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_OPS=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_SUN4I=y -CONFIG_DMA_SUN6I=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_DVB_CORE=y -CONFIG_DWMAC_GENERIC=y -# CONFIG_DWMAC_SUN8I is not set -CONFIG_DWMAC_SUNXI=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ELF_CORE=y -CONFIG_EXT4_FS=y -CONFIG_EXTCON=y -CONFIG_F2FS_FS=y -CONFIG_FAT_FS=y -CONFIG_FB=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_FOREIGN_ENDIAN=y -CONFIG_FB_LITTLE_ENDIAN=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_SIMPLE=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FONT_8x16=y -CONFIG_FONT_8x8=y -CONFIG_FONT_SUPPORT=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FRAME_WARN=2048 -CONFIG_FREEZER=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_CACHE=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GLOB=y -CONFIG_GPIO_CDEV=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HOTPLUG_CPU=y -CONFIG_HWMON=y -CONFIG_HW_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_MV64XXX=y -CONFIG_I2C_SUN6I_P2WI=y -CONFIG_IIO=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_AXP20X_PEK=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_KALLSYMS=y -CONFIG_KEYBOARD_SUN4I_LRADC=y -CONFIG_KMAP_LOCAL=y -CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y -CONFIG_KSM=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_MACH_SUN4I=y -CONFIG_MACH_SUN5I=y -CONFIG_MACH_SUN6I=y -CONFIG_MACH_SUN7I=y -CONFIG_MACH_SUN8I=y -CONFIG_MACH_SUN9I=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_SUN4I=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_PLATFORM_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_TEST_SUPPORT=y -CONFIG_MEDIA_TUNER=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_AXP20X=y -CONFIG_MFD_AXP20X_I2C=y -CONFIG_MFD_AXP20X_RSB=y -CONFIG_MFD_CORE=y -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_SUNXI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_VENDOR_ALLWINNER=y -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=8 -CONFIG_NVMEM=y -CONFIG_NVMEM_SUNXI_SID=y -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -CONFIG_PCS_XPCS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PHY_SUN4I_USB=y -# CONFIG_PHY_SUN50I_USB3 is not set -# CONFIG_PHY_SUN6I_MIPI_DPHY is not set -CONFIG_PHY_SUN9I_USB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_AXP209=y -# CONFIG_PINCTRL_SUN20I_D1 is not set -CONFIG_PINCTRL_SUN4I_A10=y -# CONFIG_PINCTRL_SUN50I_A100 is not set -# CONFIG_PINCTRL_SUN50I_A100_R is not set -# CONFIG_PINCTRL_SUN50I_A64 is not set -# CONFIG_PINCTRL_SUN50I_A64_R is not set -# CONFIG_PINCTRL_SUN50I_H5 is not set -# CONFIG_PINCTRL_SUN50I_H6 is not set -# CONFIG_PINCTRL_SUN50I_H616 is not set -# CONFIG_PINCTRL_SUN50I_H616_R is not set -# CONFIG_PINCTRL_SUN50I_H6_R is not set -CONFIG_PINCTRL_SUN5I=y -CONFIG_PINCTRL_SUN6I_A31=y -CONFIG_PINCTRL_SUN6I_A31_R=y -CONFIG_PINCTRL_SUN8I_A23=y -CONFIG_PINCTRL_SUN8I_A23_R=y -CONFIG_PINCTRL_SUN8I_A33=y -CONFIG_PINCTRL_SUN8I_A83T=y -CONFIG_PINCTRL_SUN8I_A83T_R=y -CONFIG_PINCTRL_SUN8I_H3=y -CONFIG_PINCTRL_SUN8I_H3_R=y -CONFIG_PINCTRL_SUN8I_V3S=y -CONFIG_PINCTRL_SUN9I_A80=y -CONFIG_PINCTRL_SUN9I_A80_R=y -CONFIG_PINCTRL_SUNXI=y -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_PM_OPP=y -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PRINTK_TIME=y -CONFIG_PROC_EVENTS=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_SUN4I=y -CONFIG_PWM_SYSFS=y -CONFIG_RATIONAL=y -CONFIG_REALTEK_PHY=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_AXP20X=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_REGULATOR_SY8106A=y -CONFIG_RELAY=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_SIMPLE=y -CONFIG_RESET_SUNXI=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SATA_HOST=y -CONFIG_SATA_PMP=y -CONFIG_SCSI=y -CONFIG_SCSI_COMMON=y -CONFIG_SDIO_UART=y -CONFIG_SECURITYFS=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_DWLIB=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_RUNTIME_UARTS=8 -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SND=y -CONFIG_SND_COMPRESS_OFFLOAD=y -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_PCM=y -CONFIG_SND_SIMPLE_CARD=y -CONFIG_SND_SIMPLE_CARD_UTILS=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_I2C_AND_SPI=y -# CONFIG_SND_SUN4I_I2S is not set -# CONFIG_SND_SUN4I_SPDIF is not set -# CONFIG_SND_SUN50I_DMIC is not set -# CONFIG_SND_SUN8I_CODEC is not set -# CONFIG_SND_SUN8I_CODEC_ANALOG is not set -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_SUN4I=y -CONFIG_SPI_SUN6I=y -CONFIG_SRCU=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_SUN4I_A10_CCU=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_CCU=y -CONFIG_SUN5I_HSTIMER=y -CONFIG_SUN6I_A31_CCU=y -# CONFIG_SUN6I_RTC_CCU is not set -CONFIG_SUN8I_A23_CCU=y -CONFIG_SUN8I_A33_CCU=y -CONFIG_SUN8I_A83T_CCU=y -CONFIG_SUN8I_DE2_CCU=y -CONFIG_SUN8I_H3_CCU=y -CONFIG_SUN8I_R40_CCU=y -CONFIG_SUN8I_R_CCU=y -CONFIG_SUN8I_THERMAL=y -CONFIG_SUN8I_V3S_CCU=y -CONFIG_SUN9I_A80_CCU=y -CONFIG_SUNXI_CCU=y -CONFIG_SUNXI_MBUS=y -CONFIG_SUNXI_RSB=y -CONFIG_SUNXI_SRAM=y -CONFIG_SUNXI_WATCHDOG=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_COMMON=y -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_GADGET=y -CONFIG_USB_NET_DRIVERS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_ROLE_SWITCH=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USERIO=y -CONFIG_USE_OF=y -CONFIG_VFAT_FS=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VHOST=y -CONFIG_VHOST_IOTLB=y -CONFIG_VHOST_NET=y -# CONFIG_VIDEO_SUN4I_CSI is not set -# CONFIG_VIDEO_SUN6I_CSI is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 diff --git a/target/linux/sunxi/config-6.6 b/target/linux/sunxi/config-6.6 new file mode 100644 index 0000000000..a76834c13a --- /dev/null +++ b/target/linux/sunxi/config-6.6 @@ -0,0 +1,524 @@ +# CONFIG_AHCI_SUNXI is not set +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_FORCE_MAX_ORDER=11 +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_NR_GPIO=416 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_SUNXI_MC_SMP=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM=y +CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +CONFIG_ARM_CCI=y +CONFIG_ARM_CCI400_COMMON=y +CONFIG_ARM_CCI400_PORT_CTRL=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARM_CRYPTO=y +CONFIG_ARM_ERRATA_643719=y +CONFIG_ARM_GIC=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_HEAVY_MB=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_LPAE=y +CONFIG_ARM_PATCH_IDIV=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_PSCI=y +CONFIG_ARM_PSCI_FW=y +CONFIG_ARM_THUMB=y +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_ATA=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_AXP20X_POWER=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_PM=y +CONFIG_BOUNCE=y +CONFIG_CACHE_L2X0=y +CONFIG_CAN=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLK_SUNXI=y +CONFIG_CLK_SUNXI_CLOCKS=y +CONFIG_CLK_SUNXI_PRCM_SUN6I=y +CONFIG_CLK_SUNXI_PRCM_SUN8I=y +CONFIG_CLK_SUNXI_PRCM_SUN9I=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CONFIGFS_FS=y +CONFIG_CONNECTOR=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_COREDUMP=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_SPECTRE=y +CONFIG_CPU_THERMAL=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRYPTO_CRC32=y +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_CRCT10DIF_ARM_CE=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_DEV_ALLWINNER=y +CONFIG_CRYPTO_DEV_SUN4I_SS=y +# CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG is not set +CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y +# CONFIG_CRYPTO_DEV_SUN8I_CE is not set +# CONFIG_CRYPTO_DEV_SUN8I_SS is not set +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_LIB_DES=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_SHA1=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_OPS=y +CONFIG_DMA_REMAP=y +CONFIG_DMA_SUN4I=y +CONFIG_DMA_SUN6I=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DNOTIFY=y +CONFIG_DTC=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_DVB_CORE=y +CONFIG_DWMAC_GENERIC=y +# CONFIG_DWMAC_SUN8I is not set +CONFIG_DWMAC_SUNXI=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_ELF_CORE=y +CONFIG_EXT4_FS=y +CONFIG_EXTCON=y +CONFIG_F2FS_FS=y +CONFIG_FAT_FS=y +CONFIG_FB=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_CMDLINE=y +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_LITTLE_ENDIAN=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FONT_8x16=y +CONFIG_FONT_8x8=y +CONFIG_FONT_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FRAME_WARN=2048 +CONFIG_FREEZER=y +CONFIG_FS_IOMAP=y +CONFIG_FS_MBCACHE=y +CONFIG_FS_POSIX_ACL=y +CONFIG_FWNODE_MDIO=y +CONFIG_FW_CACHE=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ARCH_TOPOLOGY=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_VDSO_32=y +CONFIG_GLOB=y +CONFIG_GPIO_CDEV=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_SMP=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_HOTPLUG_CPU=y +CONFIG_HWMON=y +CONFIG_HW_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_MV64XXX=y +CONFIG_I2C_SUN6I_P2WI=y +CONFIG_IIO=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=y +CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_JBD2=y +CONFIG_KALLSYMS=y +CONFIG_KEYBOARD_SUN4I_LRADC=y +CONFIG_KMAP_LOCAL=y +CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y +CONFIG_KSM=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_LEDS_GPIO=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_MACH_SUN4I=y +CONFIG_MACH_SUN5I=y +CONFIG_MACH_SUN6I=y +CONFIG_MACH_SUN7I=y +CONFIG_MACH_SUN8I=y +CONFIG_MACH_SUN9I=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MDIO_SUN4I=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_PLATFORM_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_TEST_SUPPORT=y +CONFIG_MEDIA_TUNER=y +CONFIG_MEMFD_CREATE=y +CONFIG_MFD_AXP20X=y +CONFIG_MFD_AXP20X_I2C=y +CONFIG_MFD_AXP20X_RSB=y +CONFIG_MFD_CORE=y +CONFIG_MFD_SUN6I_PRCM=y +CONFIG_MFD_SYSCON=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_SUNXI=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIT_FW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEON=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NET_SELFTESTS=y +CONFIG_NET_VENDOR_ALLWINNER=y +CONFIG_NLS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NO_HZ=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=8 +CONFIG_NVMEM=y +CONFIG_NVMEM_SUNXI_SID=y +CONFIG_NVMEM_SYSFS=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PADATA=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PAGE_POOL=y +CONFIG_PCS_XPCS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=3 +CONFIG_PHYLIB=y +CONFIG_PHYLINK=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_PHY_SUN4I_USB=y +# CONFIG_PHY_SUN50I_USB3 is not set +# CONFIG_PHY_SUN6I_MIPI_DPHY is not set +CONFIG_PHY_SUN9I_USB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AXP209=y +# CONFIG_PINCTRL_SUN20I_D1 is not set +CONFIG_PINCTRL_SUN4I_A10=y +# CONFIG_PINCTRL_SUN50I_A100 is not set +# CONFIG_PINCTRL_SUN50I_A100_R is not set +# CONFIG_PINCTRL_SUN50I_A64 is not set +# CONFIG_PINCTRL_SUN50I_A64_R is not set +# CONFIG_PINCTRL_SUN50I_H5 is not set +# CONFIG_PINCTRL_SUN50I_H6 is not set +# CONFIG_PINCTRL_SUN50I_H616 is not set +# CONFIG_PINCTRL_SUN50I_H616_R is not set +# CONFIG_PINCTRL_SUN50I_H6_R is not set +CONFIG_PINCTRL_SUN5I=y +CONFIG_PINCTRL_SUN6I_A31=y +CONFIG_PINCTRL_SUN6I_A31_R=y +CONFIG_PINCTRL_SUN8I_A23=y +CONFIG_PINCTRL_SUN8I_A23_R=y +CONFIG_PINCTRL_SUN8I_A33=y +CONFIG_PINCTRL_SUN8I_A83T=y +CONFIG_PINCTRL_SUN8I_A83T_R=y +CONFIG_PINCTRL_SUN8I_H3=y +CONFIG_PINCTRL_SUN8I_H3_R=y +CONFIG_PINCTRL_SUN8I_V3S=y +CONFIG_PINCTRL_SUN9I_A80=y +CONFIG_PINCTRL_SUN9I_A80_R=y +CONFIG_PINCTRL_SUNXI=y +CONFIG_PM=y +CONFIG_PM_CLK=y +CONFIG_PM_OPP=y +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_POWER_RESET=y +CONFIG_POWER_SUPPLY=y +CONFIG_PPS=y +CONFIG_PRINTK_TIME=y +CONFIG_PROC_EVENTS=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_PTP_1588_CLOCK_OPTIONAL=y +CONFIG_PWM=y +CONFIG_PWM_SUN4I=y +CONFIG_PWM_SYSFS=y +CONFIG_RATIONAL=y +CONFIG_REALTEK_PHY=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_IRQ=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_SY8106A=y +CONFIG_RELAY=y +CONFIG_RESET_CONTROLLER=y +CONFIG_RESET_SIMPLE=y +CONFIG_RESET_SUNXI=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_SATA_HOST=y +CONFIG_SATA_PMP=y +CONFIG_SCSI=y +CONFIG_SCSI_COMMON=y +CONFIG_SDIO_UART=y +CONFIG_SECURITYFS=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_DWLIB=y +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=8 +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SG_POOL=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SND=y +CONFIG_SND_COMPRESS_OFFLOAD=y +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +CONFIG_SND_PCM=y +CONFIG_SND_SIMPLE_CARD=y +CONFIG_SND_SIMPLE_CARD_UTILS=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SUN50I_DMIC is not set +# CONFIG_SND_SUN8I_CODEC is not set +# CONFIG_SND_SUN8I_CODEC_ANALOG is not set +CONFIG_SOCK_RX_QUEUE_MAPPING=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SPI_SUN4I=y +CONFIG_SPI_SUN6I=y +CONFIG_SRCU=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_SUN4I_A10_CCU=y +# CONFIG_SUN4I_EMAC is not set +CONFIG_SUN4I_TIMER=y +CONFIG_SUN5I_CCU=y +CONFIG_SUN5I_HSTIMER=y +CONFIG_SUN6I_A31_CCU=y +# CONFIG_SUN6I_RTC_CCU is not set +CONFIG_SUN8I_A23_CCU=y +CONFIG_SUN8I_A33_CCU=y +CONFIG_SUN8I_A83T_CCU=y +CONFIG_SUN8I_DE2_CCU=y +CONFIG_SUN8I_H3_CCU=y +CONFIG_SUN8I_R40_CCU=y +CONFIG_SUN8I_R_CCU=y +CONFIG_SUN8I_THERMAL=y +CONFIG_SUN8I_V3S_CCU=y +CONFIG_SUN9I_A80_CCU=y +CONFIG_SUNXI_CCU=y +CONFIG_SUNXI_MBUS=y +CONFIG_SUNXI_RSB=y +CONFIG_SUNXI_SRAM=y +CONFIG_SUNXI_WATCHDOG=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_SWIOTLB=y +CONFIG_SWPHY=y +CONFIG_SWP_EMULATE=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TOUCHSCREEN_SUN4I=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_UNWINDER_ARM=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_COMMON=y +CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_GADGET=y +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_ROLE_SWITCH=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SUPPORT=y +CONFIG_USERIO=y +CONFIG_USE_OF=y +CONFIG_VFAT_FS=y +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_VHOST=y +CONFIG_VHOST_IOTLB=y +CONFIG_VHOST_NET=y +# CONFIG_VIDEO_SUN4I_CSI is not set +# CONFIG_VIDEO_SUN6I_CSI is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XPS=y +CONFIG_XXHASH=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 diff --git a/target/linux/sunxi/cortexa53/config-6.1 b/target/linux/sunxi/cortexa53/config-6.1 deleted file mode 100644 index 55bcd4e8e5..0000000000 --- a/target/linux/sunxi/cortexa53/config-6.1 +++ /dev/null @@ -1,109 +0,0 @@ -CONFIG_64BIT=y -CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=24 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_STACKWALK=y -CONFIG_ARCH_WANTS_NO_INSTR=y -CONFIG_ARM64=y -CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_CRYPTO=y -CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y -CONFIG_ARM64_ERRATUM_2051678=y -CONFIG_ARM64_ERRATUM_2077057=y -CONFIG_ARM64_ERRATUM_2658417=y -CONFIG_ARM64_ERRATUM_2054223=y -CONFIG_ARM64_ERRATUM_2067961=y -CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_PA_BITS=48 -CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_TAGGED_ADDR_ABI=y -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CRYPTO_AES_ARM64=y -CONFIG_CRYPTO_AES_ARM64_CE=y -CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_AES_ARM64_CE_CCM=y -CONFIG_CRYPTO_BLAKE2S=y -CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_GHASH_ARM64_CE=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_SHA1_ARM64_CE=y -CONFIG_CRYPTO_SIMD=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DWMAC_SUN8I=y -CONFIG_EEPROM_AT24=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_MDIO_BUS_MUX=y -CONFIG_MICREL_PHY=y -# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MOTORCOMM_PHY=y -CONFIG_MUSB_PIO_ONLY=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_NO_IOPORT_MAP=y -CONFIG_PARTITION_PERCPU=y -CONFIG_PHY_SUN50I_USB3=y -CONFIG_PINCTRL_SUN50I_A100=y -CONFIG_PINCTRL_SUN50I_A100_R=y -CONFIG_PINCTRL_SUN50I_A64=y -CONFIG_PINCTRL_SUN50I_A64_R=y -CONFIG_PINCTRL_SUN50I_H5=y -CONFIG_PINCTRL_SUN50I_H6=y -CONFIG_PINCTRL_SUN50I_H6_R=y -CONFIG_PINCTRL_SUN50I_H616=y -CONFIG_PINCTRL_SUN50I_H616_R=y -# CONFIG_PREEMPT_DYNAMIC is not set -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_RODATA_FULL_DEFAULT_ENABLED=y -# CONFIG_SCHED_CLUSTER is not set -# CONFIG_SHADOW_CALL_STACK is not set -# CONFIG_SND_SUN50I_CODEC_ANALOG is not set -CONFIG_SOUND_OSS_CORE_PRECLAIM=y -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SUN50I_A100_CCU=y -CONFIG_SUN50I_A100_R_CCU=y -CONFIG_SUN50I_A64_CCU=y -CONFIG_SUN50I_DE2_BUS=y -CONFIG_SUN50I_ERRATUM_UNKNOWN1=y -CONFIG_SUN50I_H616_CCU=y -CONFIG_SUN50I_H6_CCU=y -CONFIG_SUN50I_H6_R_CCU=y -# CONFIG_SUN6I_RTC_CCU is not set -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_USB_MUSB_DUAL_ROLE=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_SUNXI=y -CONFIG_USB_PHY=y -CONFIG_VMAP_STACK=y -CONFIG_ZONE_DMA32=y -CONFIG_SURFACE_PLATFORMS=y -# CONFIG_CRYPTO_POLYVAL_ARM64_CE is not set -# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set -# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set -# CONFIG_PAGE_TABLE_CHECK is not set -CONFIG_RANDOMIZE_KSTACK_OFFSET=y -# CONFIG_ARCH_NXP is not set diff --git a/target/linux/sunxi/cortexa53/config-6.6 b/target/linux/sunxi/cortexa53/config-6.6 new file mode 100644 index 0000000000..55bcd4e8e5 --- /dev/null +++ b/target/linux/sunxi/cortexa53/config-6.6 @@ -0,0 +1,109 @@ +CONFIG_64BIT=y +CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=24 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ARCH_STACKWALK=y +CONFIG_ARCH_WANTS_NO_INSTR=y +CONFIG_ARM64=y +CONFIG_ARM64_4K_PAGES=y +CONFIG_ARM64_CRYPTO=y +CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y +CONFIG_ARM64_ERRATUM_2051678=y +CONFIG_ARM64_ERRATUM_2077057=y +CONFIG_ARM64_ERRATUM_2658417=y +CONFIG_ARM64_ERRATUM_2054223=y +CONFIG_ARM64_ERRATUM_2067961=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_PA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +CONFIG_ARM64_TAGGED_ADDR_ABI=y +CONFIG_ARM64_VA_BITS=39 +CONFIG_ARM64_VA_BITS_39=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CRYPTO_AES_ARM64=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_BLAKE2S=y +CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SIMD=y +CONFIG_DMA_DIRECT_REMAP=y +CONFIG_DWMAC_SUN8I=y +CONFIG_EEPROM_AT24=y +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_MDIO_BUS_MUX=y +CONFIG_MICREL_PHY=y +# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_MOTORCOMM_PHY=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_NO_IOPORT_MAP=y +CONFIG_PARTITION_PERCPU=y +CONFIG_PHY_SUN50I_USB3=y +CONFIG_PINCTRL_SUN50I_A100=y +CONFIG_PINCTRL_SUN50I_A100_R=y +CONFIG_PINCTRL_SUN50I_A64=y +CONFIG_PINCTRL_SUN50I_A64_R=y +CONFIG_PINCTRL_SUN50I_H5=y +CONFIG_PINCTRL_SUN50I_H6=y +CONFIG_PINCTRL_SUN50I_H6_R=y +CONFIG_PINCTRL_SUN50I_H616=y +CONFIG_PINCTRL_SUN50I_H616_R=y +# CONFIG_PREEMPT_DYNAMIC is not set +CONFIG_QUEUED_RWLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_RODATA_FULL_DEFAULT_ENABLED=y +# CONFIG_SCHED_CLUSTER is not set +# CONFIG_SHADOW_CALL_STACK is not set +# CONFIG_SND_SUN50I_CODEC_ANALOG is not set +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SPARSEMEM=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SUN50I_A100_CCU=y +CONFIG_SUN50I_A100_R_CCU=y +CONFIG_SUN50I_A64_CCU=y +CONFIG_SUN50I_DE2_BUS=y +CONFIG_SUN50I_ERRATUM_UNKNOWN1=y +CONFIG_SUN50I_H616_CCU=y +CONFIG_SUN50I_H6_CCU=y +CONFIG_SUN50I_H6_R_CCU=y +# CONFIG_SUN6I_RTC_CCU is not set +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_PHY=y +CONFIG_VMAP_STACK=y +CONFIG_ZONE_DMA32=y +CONFIG_SURFACE_PLATFORMS=y +# CONFIG_CRYPTO_POLYVAL_ARM64_CE is not set +# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set +# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set +# CONFIG_PAGE_TABLE_CHECK is not set +CONFIG_RANDOMIZE_KSTACK_OFFSET=y +# CONFIG_ARCH_NXP is not set diff --git a/target/linux/sunxi/cortexa7/config-6.1 b/target/linux/sunxi/cortexa7/config-6.1 deleted file mode 100644 index eaa6b037be..0000000000 --- a/target/linux/sunxi/cortexa7/config-6.1 +++ /dev/null @@ -1,26 +0,0 @@ -CONFIG_B53=y -CONFIG_B53_MDIO_DRIVER=y -CONFIG_CRYPTO_BLAKE2S_ARM=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_DWMAC_SUN8I=y -CONFIG_GRO_CELLS=y -# CONFIG_HARDEN_BRANCH_HISTORY is not set -# CONFIG_HARDEN_BRANCH_PREDICTOR is not set -# CONFIG_MACH_SUN4I is not set -# CONFIG_MACH_SUN5I is not set -CONFIG_MDIO_BUS_MUX=y -CONFIG_MICREL_PHY=y -CONFIG_MUSB_PIO_ONLY=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_TAG_BRCM=y -CONFIG_NET_DSA_TAG_BRCM_COMMON=y -CONFIG_NET_DSA_TAG_BRCM_LEGACY=y -CONFIG_NET_DSA_TAG_BRCM_PREPEND=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_RTC_DRV_SUN6I=y -CONFIG_USB_MUSB_DUAL_ROLE=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_SUNXI=y -CONFIG_USB_PHY=y diff --git a/target/linux/sunxi/cortexa7/config-6.6 b/target/linux/sunxi/cortexa7/config-6.6 new file mode 100644 index 0000000000..eaa6b037be --- /dev/null +++ b/target/linux/sunxi/cortexa7/config-6.6 @@ -0,0 +1,26 @@ +CONFIG_B53=y +CONFIG_B53_MDIO_DRIVER=y +CONFIG_CRYPTO_BLAKE2S_ARM=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_DWMAC_SUN8I=y +CONFIG_GRO_CELLS=y +# CONFIG_HARDEN_BRANCH_HISTORY is not set +# CONFIG_HARDEN_BRANCH_PREDICTOR is not set +# CONFIG_MACH_SUN4I is not set +# CONFIG_MACH_SUN5I is not set +CONFIG_MDIO_BUS_MUX=y +CONFIG_MICREL_PHY=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_NET_DEVLINK=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_BRCM=y +CONFIG_NET_DSA_TAG_BRCM_COMMON=y +CONFIG_NET_DSA_TAG_BRCM_LEGACY=y +CONFIG_NET_DSA_TAG_BRCM_PREPEND=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_RTC_DRV_SUN6I=y +CONFIG_USB_MUSB_DUAL_ROLE=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB_PHY=y diff --git a/target/linux/sunxi/cortexa8/config-6.1 b/target/linux/sunxi/cortexa8/config-6.1 deleted file mode 100644 index b893b3142e..0000000000 --- a/target/linux/sunxi/cortexa8/config-6.1 +++ /dev/null @@ -1,12 +0,0 @@ -# CONFIG_ARM_LPAE is not set -CONFIG_CRYPTO_BLAKE2S_ARM=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -# CONFIG_MACH_SUN6I is not set -# CONFIG_MACH_SUN7I is not set -# CONFIG_MACH_SUN8I is not set -# CONFIG_MACH_SUN9I is not set -CONFIG_PGTABLE_LEVELS=2 -# CONFIG_PHY_SUN9I_USB is not set -# CONFIG_SPI_SUN6I is not set -# CONFIG_SUN8I_A83T_CCU is not set -# CONFIG_SUN8I_THERMAL is not set diff --git a/target/linux/sunxi/cortexa8/config-6.6 b/target/linux/sunxi/cortexa8/config-6.6 new file mode 100644 index 0000000000..b893b3142e --- /dev/null +++ b/target/linux/sunxi/cortexa8/config-6.6 @@ -0,0 +1,12 @@ +# CONFIG_ARM_LPAE is not set +CONFIG_CRYPTO_BLAKE2S_ARM=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +# CONFIG_MACH_SUN6I is not set +# CONFIG_MACH_SUN7I is not set +# CONFIG_MACH_SUN8I is not set +# CONFIG_MACH_SUN9I is not set +CONFIG_PGTABLE_LEVELS=2 +# CONFIG_PHY_SUN9I_USB is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SUN8I_A83T_CCU is not set +# CONFIG_SUN8I_THERMAL is not set diff --git a/target/linux/sunxi/patches-6.1/001-v6.2-dt-bindings-usb-Add-H616-compatible-string.patch b/target/linux/sunxi/patches-6.1/001-v6.2-dt-bindings-usb-Add-H616-compatible-string.patch deleted file mode 100644 index c24d479534..0000000000 --- a/target/linux/sunxi/patches-6.1/001-v6.2-dt-bindings-usb-Add-H616-compatible-string.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 28a1a6474c5053bae01bd29946b4d5ede539176b Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Mon, 31 Oct 2022 11:13:52 +0000 -Subject: [PATCH] dt-bindings: usb: Add H616 compatible string - -The Allwinner H616 contains four fully OHCI/EHCI compatible USB host -controllers, so just add their compatible strings to the list of -generic OHCI/EHCI controllers. - -Signed-off-by: Andre Przywara -Acked-by: Krzysztof Kozlowski -Link: https://lore.kernel.org/r/20221031111358.3387297-2-andre.przywara@arm.com -Signed-off-by: Jernej Skrabec ---- - Documentation/devicetree/bindings/usb/generic-ehci.yaml | 1 + - Documentation/devicetree/bindings/usb/generic-ohci.yaml | 1 + - 2 files changed, 2 insertions(+) - ---- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml -+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml -@@ -30,6 +30,7 @@ properties: - - allwinner,sun4i-a10-ehci - - allwinner,sun50i-a64-ehci - - allwinner,sun50i-h6-ehci -+ - allwinner,sun50i-h616-ehci - - allwinner,sun5i-a13-ehci - - allwinner,sun6i-a31-ehci - - allwinner,sun7i-a20-ehci ---- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml -+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml -@@ -20,6 +20,7 @@ properties: - - allwinner,sun4i-a10-ohci - - allwinner,sun50i-a64-ohci - - allwinner,sun50i-h6-ohci -+ - allwinner,sun50i-h616-ohci - - allwinner,sun5i-a13-ohci - - allwinner,sun6i-a31-ohci - - allwinner,sun7i-a20-ohci diff --git a/target/linux/sunxi/patches-6.1/002-v6.2-dt-bindings-phy-Add-special-clock-for-Allwinner-H616-PHY.patch b/target/linux/sunxi/patches-6.1/002-v6.2-dt-bindings-phy-Add-special-clock-for-Allwinner-H616-PHY.patch deleted file mode 100644 index 5739172ceb..0000000000 --- a/target/linux/sunxi/patches-6.1/002-v6.2-dt-bindings-phy-Add-special-clock-for-Allwinner-H616-PHY.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 6964affe65066651eca21e97247d3b7cac5153dc Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Mon, 31 Oct 2022 11:13:53 +0000 -Subject: [PATCH] dt-bindings: phy: Add special clock for Allwinner H616 PHY - -The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves -some resources from port 2's PHY and HCI IP. In particular the PMU clock -for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL -register of port 2. To allow each USB port to be controlled -independently of port 2, we need a handle to that particular PMU clock -in the *PHY* node, as the HCI and PHY part might be handled by separate -drivers. - -Add that clock to the requirements of the H616 PHY binding, so that a -PHY driver can apply the quirk in isolation, without requiring help from -port 2's HCI driver. - -Signed-off-by: Andre Przywara -Reviewed-by: Rob Herring -Link: https://lore.kernel.org/r/20221031111358.3387297-3-andre.przywara@arm.com -Signed-off-by: Vinod Koul ---- - .../phy/allwinner,sun8i-h3-usb-phy.yaml | 26 +++++++++++++++++++ - 1 file changed, 26 insertions(+) - ---- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml -+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml -@@ -36,18 +36,22 @@ properties: - - const: pmu3 - - clocks: -+ minItems: 4 - items: - - description: USB OTG PHY bus clock - - description: USB Host 0 PHY bus clock - - description: USB Host 1 PHY bus clock - - description: USB Host 2 PHY bus clock -+ - description: PMU clock for host port 2 - - clock-names: -+ minItems: 4 - items: - - const: usb0_phy - - const: usb1_phy - - const: usb2_phy - - const: usb3_phy -+ - const: pmu2_clk - - resets: - items: -@@ -96,6 +100,28 @@ required: - - resets - - reset-names - -+allOf: -+ - if: -+ properties: -+ compatible: -+ contains: -+ enum: -+ - allwinner,sun50i-h616-usb-phy -+ then: -+ properties: -+ clocks: -+ minItems: 5 -+ -+ clock-names: -+ minItems: 5 -+ else: -+ properties: -+ clocks: -+ maxItems: 4 -+ -+ clock-names: -+ maxItems: 4 -+ - additionalProperties: false - - examples: diff --git a/target/linux/sunxi/patches-6.1/003-v6.2-arm64-dts-allwinner-h616-Add-USB-nodes.patch b/target/linux/sunxi/patches-6.1/003-v6.2-arm64-dts-allwinner-h616-Add-USB-nodes.patch deleted file mode 100644 index 6dc1cf2f36..0000000000 --- a/target/linux/sunxi/patches-6.1/003-v6.2-arm64-dts-allwinner-h616-Add-USB-nodes.patch +++ /dev/null @@ -1,188 +0,0 @@ -From f40cf244c3feb4e1a442f8029b691add2c65b3ab Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Mon, 31 Oct 2022 11:13:56 +0000 -Subject: [PATCH] arm64: dts: allwinner: h616: Add USB nodes - -Add the nodes for the MUSB and the four USB host controllers to the SoC -.dtsi, along with the PHY node needed to bind all of them together. - -EHCI/OHCI and MUSB are compatible to previous SoCs, but the PHY requires -some quirks (handled in the driver). - -Signed-off-by: Andre Przywara -Reviewed-by: Jernej Skrabec -Link: https://lore.kernel.org/r/20221031111358.3387297-6-andre.przywara@arm.com -Signed-off-by: Jernej Skrabec ---- - .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++ - 1 file changed, 160 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi -@@ -504,6 +504,166 @@ - }; - }; - -+ usbotg: usb@5100000 { -+ compatible = "allwinner,sun50i-h616-musb", -+ "allwinner,sun8i-h3-musb"; -+ reg = <0x05100000 0x0400>; -+ clocks = <&ccu CLK_BUS_OTG>; -+ resets = <&ccu RST_BUS_OTG>; -+ interrupts = ; -+ interrupt-names = "mc"; -+ phys = <&usbphy 0>; -+ phy-names = "usb"; -+ extcon = <&usbphy 0>; -+ status = "disabled"; -+ }; -+ -+ usbphy: phy@5100400 { -+ compatible = "allwinner,sun50i-h616-usb-phy"; -+ reg = <0x05100400 0x24>, -+ <0x05101800 0x14>, -+ <0x05200800 0x14>, -+ <0x05310800 0x14>, -+ <0x05311800 0x14>; -+ reg-names = "phy_ctrl", -+ "pmu0", -+ "pmu1", -+ "pmu2", -+ "pmu3"; -+ clocks = <&ccu CLK_USB_PHY0>, -+ <&ccu CLK_USB_PHY1>, -+ <&ccu CLK_USB_PHY2>, -+ <&ccu CLK_USB_PHY3>, -+ <&ccu CLK_BUS_EHCI2>; -+ clock-names = "usb0_phy", -+ "usb1_phy", -+ "usb2_phy", -+ "usb3_phy", -+ "pmu2_clk"; -+ resets = <&ccu RST_USB_PHY0>, -+ <&ccu RST_USB_PHY1>, -+ <&ccu RST_USB_PHY2>, -+ <&ccu RST_USB_PHY3>; -+ reset-names = "usb0_reset", -+ "usb1_reset", -+ "usb2_reset", -+ "usb3_reset"; -+ status = "disabled"; -+ #phy-cells = <1>; -+ }; -+ -+ ehci0: usb@5101000 { -+ compatible = "allwinner,sun50i-h616-ehci", -+ "generic-ehci"; -+ reg = <0x05101000 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_OHCI0>, -+ <&ccu CLK_BUS_EHCI0>, -+ <&ccu CLK_USB_OHCI0>; -+ resets = <&ccu RST_BUS_OHCI0>, -+ <&ccu RST_BUS_EHCI0>; -+ phys = <&usbphy 0>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci0: usb@5101400 { -+ compatible = "allwinner,sun50i-h616-ohci", -+ "generic-ohci"; -+ reg = <0x05101400 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_OHCI0>, -+ <&ccu CLK_USB_OHCI0>; -+ resets = <&ccu RST_BUS_OHCI0>; -+ phys = <&usbphy 0>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ehci1: usb@5200000 { -+ compatible = "allwinner,sun50i-h616-ehci", -+ "generic-ehci"; -+ reg = <0x05200000 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_OHCI1>, -+ <&ccu CLK_BUS_EHCI1>, -+ <&ccu CLK_USB_OHCI1>; -+ resets = <&ccu RST_BUS_OHCI1>, -+ <&ccu RST_BUS_EHCI1>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci1: usb@5200400 { -+ compatible = "allwinner,sun50i-h616-ohci", -+ "generic-ohci"; -+ reg = <0x05200400 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_OHCI1>, -+ <&ccu CLK_USB_OHCI1>; -+ resets = <&ccu RST_BUS_OHCI1>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ehci2: usb@5310000 { -+ compatible = "allwinner,sun50i-h616-ehci", -+ "generic-ehci"; -+ reg = <0x05310000 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_OHCI2>, -+ <&ccu CLK_BUS_EHCI2>, -+ <&ccu CLK_USB_OHCI2>; -+ resets = <&ccu RST_BUS_OHCI2>, -+ <&ccu RST_BUS_EHCI2>; -+ phys = <&usbphy 2>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci2: usb@5310400 { -+ compatible = "allwinner,sun50i-h616-ohci", -+ "generic-ohci"; -+ reg = <0x05310400 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_OHCI2>, -+ <&ccu CLK_USB_OHCI2>; -+ resets = <&ccu RST_BUS_OHCI2>; -+ phys = <&usbphy 2>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ehci3: usb@5311000 { -+ compatible = "allwinner,sun50i-h616-ehci", -+ "generic-ehci"; -+ reg = <0x05311000 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_OHCI3>, -+ <&ccu CLK_BUS_EHCI3>, -+ <&ccu CLK_USB_OHCI3>; -+ resets = <&ccu RST_BUS_OHCI3>, -+ <&ccu RST_BUS_EHCI3>; -+ phys = <&usbphy 3>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci3: usb@5311400 { -+ compatible = "allwinner,sun50i-h616-ohci", -+ "generic-ohci"; -+ reg = <0x05311400 0x100>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_OHCI3>, -+ <&ccu CLK_USB_OHCI3>; -+ resets = <&ccu RST_BUS_OHCI3>; -+ phys = <&usbphy 3>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ - rtc: rtc@7000000 { - compatible = "allwinner,sun50i-h616-rtc"; - reg = <0x07000000 0x400>; diff --git a/target/linux/sunxi/patches-6.1/004-v6.2-arm64-dts-allwinner-h616-OrangePi-Zero-2-Add-USB-nodes.patch b/target/linux/sunxi/patches-6.1/004-v6.2-arm64-dts-allwinner-h616-OrangePi-Zero-2-Add-USB-nodes.patch deleted file mode 100644 index a544e482f3..0000000000 --- a/target/linux/sunxi/patches-6.1/004-v6.2-arm64-dts-allwinner-h616-OrangePi-Zero-2-Add-USB-nodes.patch +++ /dev/null @@ -1,81 +0,0 @@ -From db5f028309ede13767e2ba356c1975ac37a4fd6c Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Mon, 31 Oct 2022 11:13:57 +0000 -Subject: [PATCH] arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes - -The OrangePi Zero 2 has one USB-A host port, VBUS is provided by -a GPIO controlled regulator. -The USB-C port is meant to power the board, but is also connected to -the USB 0 port, which we configure as an MUSB peripheral. - -Signed-off-by: Andre Przywara -Reviewed-by: Jernej Skrabec -Link: https://lore.kernel.org/r/20221031111358.3387297-7-andre.przywara@arm.com -Signed-off-by: Jernej Skrabec ---- - .../allwinner/sun50i-h616-orangepi-zero2.dts | 41 +++++++++++++++++++ - 1 file changed, 41 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts -@@ -49,8 +49,24 @@ - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; -+ -+ reg_usb1_vbus: regulator-usb1-vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ vin-supply = <®_vcc5v>; -+ enable-active-high; -+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ -+ }; -+}; -+ -+&ehci1 { -+ status = "okay"; - }; - -+/* USB 2 & 3 are on headers only. */ -+ - &emac0 { - pinctrl-names = "default"; - pinctrl-0 = <&ext_rgmii_pins>; -@@ -76,6 +92,10 @@ - status = "okay"; - }; - -+&ohci1 { -+ status = "okay"; -+}; -+ - &r_rsb { - status = "okay"; - -@@ -211,3 +231,24 @@ - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; - }; -+ -+&usbotg { -+ /* -+ * PHY0 pins are connected to a USB-C socket, but a role switch -+ * is not implemented: both CC pins are pulled to GND. -+ * The VBUS pins power the device, so a fixed peripheral mode -+ * is the best choice. -+ * The board can be powered via GPIOs, in this case port0 *can* -+ * act as a host (with a cable/adapter ignoring CC), as VBUS is -+ * then provided by the GPIOs. Any user of this setup would -+ * need to adjust the DT accordingly: dr_mode set to "host", -+ * enabling OHCI0 and EHCI0. -+ */ -+ dr_mode = "peripheral"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+}; diff --git a/target/linux/sunxi/patches-6.1/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch b/target/linux/sunxi/patches-6.1/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch deleted file mode 100644 index 0747e6a8e0..0000000000 --- a/target/linux/sunxi/patches-6.1/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch +++ /dev/null @@ -1,305 +0,0 @@ -From 322bf103204b8f786547acbeed85569254e7088f Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Fri, 4 Aug 2023 18:08:54 +0100 -Subject: [PATCH] arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT - -The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some -DT nodes with the Zero 2, but comes with a different PMIC. - -Move the common parts (except the PMIC) into a new shared file, and -include that from the existing board .dts file. - -No functional change, the generated DTB is the same, except for some -phandle numbering differences. - -Signed-off-by: Andre Przywara -Acked-by: Jernej Skrabec -Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com -Signed-off-by: Jernej Skrabec ---- - .../allwinner/sun50i-h616-orangepi-zero.dtsi | 134 ++++++++++++++++++ - .../allwinner/sun50i-h616-orangepi-zero2.dts | 119 +--------------- - 2 files changed, 135 insertions(+), 118 deletions(-) - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi - ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi -@@ -0,0 +1,134 @@ -+// SPDX-License-Identifier: (GPL-2.0+ or MIT) -+/* -+ * Copyright (C) 2020 Arm Ltd. -+ * -+ * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3. -+ * Excludes PMIC nodes and properties, since they are different between the two. -+ */ -+ -+#include "sun50i-h616.dtsi" -+ -+#include -+#include -+#include -+ -+/ { -+ aliases { -+ ethernet0 = &emac0; -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ led-0 { -+ function = LED_FUNCTION_POWER; -+ color = ; -+ gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ -+ default-state = "on"; -+ }; -+ -+ led-1 { -+ function = LED_FUNCTION_STATUS; -+ color = ; -+ gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ -+ }; -+ }; -+ -+ reg_vcc5v: vcc5v { -+ /* board wide 5V supply directly from the USB-C socket */ -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc-5v"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ reg_usb1_vbus: regulator-usb1-vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ vin-supply = <®_vcc5v>; -+ enable-active-high; -+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ -+ }; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+/* USB 2 & 3 are on headers only. */ -+ -+&emac0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ext_rgmii_pins>; -+ phy-mode = "rgmii"; -+ phy-handle = <&ext_rgmii_phy>; -+ allwinner,rx-delay-ps = <3100>; -+ allwinner,tx-delay-ps = <700>; -+ status = "okay"; -+}; -+ -+&mdio0 { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ -+&mmc0 { -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; -+ -+ flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <40000000>; -+ }; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_ph_pins>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ /* -+ * PHY0 pins are connected to a USB-C socket, but a role switch -+ * is not implemented: both CC pins are pulled to GND. -+ * The VBUS pins power the device, so a fixed peripheral mode -+ * is the best choice. -+ * The board can be powered via GPIOs, in this case port0 *can* -+ * act as a host (with a cable/adapter ignoring CC), as VBUS is -+ * then provided by the GPIOs. Any user of this setup would -+ * need to adjust the DT accordingly: dr_mode set to "host", -+ * enabling OHCI0 and EHCI0. -+ */ -+ dr_mode = "peripheral"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+}; ---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts -@@ -5,95 +5,19 @@ - - /dts-v1/; - --#include "sun50i-h616.dtsi" -- --#include --#include --#include -+#include "sun50i-h616-orangepi-zero.dtsi" - - / { - model = "OrangePi Zero2"; - compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; -- -- aliases { -- ethernet0 = &emac0; -- serial0 = &uart0; -- }; -- -- chosen { -- stdout-path = "serial0:115200n8"; -- }; -- -- leds { -- compatible = "gpio-leds"; -- -- led-0 { -- function = LED_FUNCTION_POWER; -- color = ; -- gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ -- default-state = "on"; -- }; -- -- led-1 { -- function = LED_FUNCTION_STATUS; -- color = ; -- gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ -- }; -- }; -- -- reg_vcc5v: vcc5v { -- /* board wide 5V supply directly from the USB-C socket */ -- compatible = "regulator-fixed"; -- regulator-name = "vcc-5v"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- regulator-always-on; -- }; -- -- reg_usb1_vbus: regulator-usb1-vbus { -- compatible = "regulator-fixed"; -- regulator-name = "usb1-vbus"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- vin-supply = <®_vcc5v>; -- enable-active-high; -- gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ -- }; --}; -- --&ehci1 { -- status = "okay"; - }; - --/* USB 2 & 3 are on headers only. */ -- - &emac0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&ext_rgmii_pins>; -- phy-mode = "rgmii"; -- phy-handle = <&ext_rgmii_phy>; - phy-supply = <®_dcdce>; -- allwinner,rx-delay-ps = <3100>; -- allwinner,tx-delay-ps = <700>; -- status = "okay"; --}; -- --&mdio0 { -- ext_rgmii_phy: ethernet-phy@1 { -- compatible = "ethernet-phy-ieee802.3-c22"; -- reg = <1>; -- }; - }; - - &mmc0 { - vmmc-supply = <®_dcdce>; -- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -- bus-width = <4>; -- status = "okay"; --}; -- --&ohci1 { -- status = "okay"; - }; - - &r_rsb { -@@ -211,44 +135,3 @@ - vcc-ph-supply = <®_aldo1>; - vcc-pi-supply = <®_aldo1>; - }; -- --&spi0 { -- status = "okay"; -- pinctrl-names = "default"; -- pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; -- -- flash@0 { -- #address-cells = <1>; -- #size-cells = <1>; -- compatible = "jedec,spi-nor"; -- reg = <0>; -- spi-max-frequency = <40000000>; -- }; --}; -- --&uart0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart0_ph_pins>; -- status = "okay"; --}; -- --&usbotg { -- /* -- * PHY0 pins are connected to a USB-C socket, but a role switch -- * is not implemented: both CC pins are pulled to GND. -- * The VBUS pins power the device, so a fixed peripheral mode -- * is the best choice. -- * The board can be powered via GPIOs, in this case port0 *can* -- * act as a host (with a cable/adapter ignoring CC), as VBUS is -- * then provided by the GPIOs. Any user of this setup would -- * need to adjust the DT accordingly: dr_mode set to "host", -- * enabling OHCI0 and EHCI0. -- */ -- dr_mode = "peripheral"; -- status = "okay"; --}; -- --&usbphy { -- usb1_vbus-supply = <®_usb1_vbus>; -- status = "okay"; --}; diff --git a/target/linux/sunxi/patches-6.1/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch b/target/linux/sunxi/patches-6.1/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch deleted file mode 100644 index 4081a82d52..0000000000 --- a/target/linux/sunxi/patches-6.1/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch +++ /dev/null @@ -1,140 +0,0 @@ -From f1b3ddb3ecc2eec1f912383e01156c226daacfab Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Fri, 4 Aug 2023 18:08:56 +0100 -Subject: [PATCH] arm64: dts: allwinner: h616: Add OrangePi Zero 3 board - support - -The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC, -which seems to be just an H616 with more L2 cache. The board itself is a -slightly updated version of the Orange Pi Zero 2. It features: -- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU -- 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2) -- AXP313a PMIC (more capable AXP305 on the Zero2) -- Raspberry-Pi-1 compatible GPIO header -- extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports -- 1 USB 2.0 host port -- 1 USB 2.0 type C port (power supply + OTG) -- MicroSD slot -- on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2) -- 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2) -- micro-HDMI port -- (yet) unsupported Allwinner WiFi/BT chip - -Add the devicetree file describing the currently supported features, -namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at -the moment, though the basic functionality works. - -Signed-off-by: Andre Przywara -Reviewed-by: Jernej Skrabec -Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.com -Signed-off-by: Jernej Skrabec ---- - arch/arm64/boot/dts/allwinner/Makefile | 1 + - .../allwinner/sun50i-h618-orangepi-zero3.dts | 94 +++++++++++++++++++ - 2 files changed, 95 insertions(+) - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts - ---- a/arch/arm64/boot/dts/allwinner/Makefile -+++ b/arch/arm64/boot/dts/allwinner/Makefile -@@ -40,3 +40,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-ta - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb -+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts -@@ -0,0 +1,94 @@ -+// SPDX-License-Identifier: (GPL-2.0+ or MIT) -+/* -+ * Copyright (C) 2023 Arm Ltd. -+ */ -+ -+/dts-v1/; -+ -+#include "sun50i-h616-orangepi-zero.dtsi" -+ -+/ { -+ model = "OrangePi Zero3"; -+ compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618"; -+}; -+ -+&emac0 { -+ phy-supply = <®_dldo1>; -+}; -+ -+&ext_rgmii_phy { -+ motorcomm,clk-out-frequency-hz = <125000000>; -+}; -+ -+&mmc0 { -+ /* -+ * The schematic shows the card detect pin wired up to PF6, via an -+ * inverter, but it just doesn't work. -+ */ -+ broken-cd; -+ vmmc-supply = <®_dldo1>; -+}; -+ -+&r_i2c { -+ status = "okay"; -+ -+ axp313: pmic@36 { -+ compatible = "x-powers,axp313a"; -+ reg = <0x36>; -+ #interrupt-cells = <1>; -+ interrupt-controller; -+ interrupt-parent = <&pio>; -+ interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */ -+ -+ vin1-supply = <®_vcc5v>; -+ vin2-supply = <®_vcc5v>; -+ vin3-supply = <®_vcc5v>; -+ -+ regulators { -+ /* Supplies VCC-PLL, so needs to be always on. */ -+ reg_aldo1: aldo1 { -+ regulator-always-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-name = "vcc1v8"; -+ }; -+ -+ /* Supplies VCC-IO, so needs to be always on. */ -+ reg_dldo1: dldo1 { -+ regulator-always-on; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc3v3"; -+ }; -+ -+ reg_dcdc1: dcdc1 { -+ regulator-always-on; -+ regulator-min-microvolt = <810000>; -+ regulator-max-microvolt = <990000>; -+ regulator-name = "vdd-gpu-sys"; -+ }; -+ -+ reg_dcdc2: dcdc2 { -+ regulator-always-on; -+ regulator-min-microvolt = <810000>; -+ regulator-max-microvolt = <1100000>; -+ regulator-name = "vdd-cpu"; -+ }; -+ -+ reg_dcdc3: dcdc3 { -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1100000>; -+ regulator-name = "vdd-dram"; -+ }; -+ }; -+ }; -+}; -+ -+&pio { -+ vcc-pc-supply = <®_dldo1>; -+ vcc-pf-supply = <®_dldo1>; -+ vcc-pg-supply = <®_aldo1>; -+ vcc-ph-supply = <®_dldo1>; -+ vcc-pi-supply = <®_dldo1>; -+}; diff --git a/target/linux/sunxi/patches-6.1/007-v6.7-arm64-dts-allwinner-h616-update-emac-for-Orange-Pi.patch b/target/linux/sunxi/patches-6.1/007-v6.7-arm64-dts-allwinner-h616-update-emac-for-Orange-Pi.patch deleted file mode 100644 index a492eed551..0000000000 --- a/target/linux/sunxi/patches-6.1/007-v6.7-arm64-dts-allwinner-h616-update-emac-for-Orange-Pi.patch +++ /dev/null @@ -1,57 +0,0 @@ -From b9622937d95809ef89904583191571a9fa326402 Mon Sep 17 00:00:00 2001 -From: Chukun Pan -Date: Sun, 29 Oct 2023 15:40:09 +0800 -Subject: [PATCH] arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3 - -The current emac setting is not suitable for Orange Pi Zero 3, -move it back to Orange Pi Zero 2 DT. Also update phy mode and -delay values for emac on Orange Pi Zero 3. -With these changes, Ethernet now looks stable. - -Fixes: 322bf103204b ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT") -Signed-off-by: Chukun Pan -Reviewed-by: Jernej Skrabec -Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn -Signed-off-by: Jernej Skrabec ---- - arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 3 --- - arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 3 +++ - arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 2 ++ - 3 files changed, 5 insertions(+), 3 deletions(-) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi -@@ -68,10 +68,7 @@ - &emac0 { - pinctrl-names = "default"; - pinctrl-0 = <&ext_rgmii_pins>; -- phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; -- allwinner,rx-delay-ps = <3100>; -- allwinner,tx-delay-ps = <700>; - status = "okay"; - }; - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts -@@ -13,6 +13,9 @@ - }; - - &emac0 { -+ allwinner,rx-delay-ps = <3100>; -+ allwinner,tx-delay-ps = <700>; -+ phy-mode = "rgmii"; - phy-supply = <®_dcdce>; - }; - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts -@@ -13,6 +13,8 @@ - }; - - &emac0 { -+ allwinner,tx-delay-ps = <700>; -+ phy-mode = "rgmii-rxid"; - phy-supply = <®_dldo1>; - }; - diff --git a/target/linux/sunxi/patches-6.1/008-v6.7-arm64-dts-allwinner-h616-Add-SID-controller-node.patch b/target/linux/sunxi/patches-6.1/008-v6.7-arm64-dts-allwinner-h616-Add-SID-controller-node.patch deleted file mode 100644 index ce8add18ab..0000000000 --- a/target/linux/sunxi/patches-6.1/008-v6.7-arm64-dts-allwinner-h616-Add-SID-controller-node.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 951992797378a2177946400438f4d23c9fceae5b Mon Sep 17 00:00:00 2001 -From: Martin Botka -Date: Tue, 12 Sep 2023 14:25:13 +0200 -Subject: [PATCH] arm64: dts: allwinner: h616: Add SID controller node - -Add node for the H616 SID controller - -Signed-off-by: Martin Botka -Acked-by: Jernej Skrabec -Link: https://lore.kernel.org/r/20230912-sid-h616-v3-2-ee18e1c5bbb5@somainline.org -Signed-off-by: Jernej Skrabec ---- - arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi -@@ -133,6 +133,13 @@ - #reset-cells = <1>; - }; - -+ sid: efuse@3006000 { -+ compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid"; -+ reg = <0x03006000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ }; -+ - watchdog: watchdog@30090a0 { - compatible = "allwinner,sun50i-h616-wdt", - "allwinner,sun6i-a31-wdt"; diff --git a/target/linux/sunxi/patches-6.1/009-v6.9-soc-sunxi-sram-export-register-0-for-THS-on-H616.patch b/target/linux/sunxi/patches-6.1/009-v6.9-soc-sunxi-sram-export-register-0-for-THS-on-H616.patch deleted file mode 100644 index 3453e2aa53..0000000000 --- a/target/linux/sunxi/patches-6.1/009-v6.9-soc-sunxi-sram-export-register-0-for-THS-on-H616.patch +++ /dev/null @@ -1,98 +0,0 @@ -From 898d96c5464b69af44f6407c5de81ebc349d574b Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Mon, 19 Feb 2024 15:36:33 +0000 -Subject: [PATCH] soc: sunxi: sram: export register 0 for THS on H616 - -The Allwinner H616 SoC contains a mysterious bit at register offset 0x0 -in the SRAM control block. If bit 16 is set (the reset value), the -temperature readings of the THS are way off, leading to reports about -200C, at normal ambient temperatures. Clearing this bits brings the -reported values down to the expected values. -The BSP code clears this bit in firmware (U-Boot), and has an explicit -comment about this, but offers no real explanation. - -Experiments in U-Boot show that register 0x0 has no effect on the SRAM C -visibility: all tested bit settings still allow full read and write -access by the CPU to the whole of SRAM C. Only bit 24 of the register at -offset 0x4 makes all of SRAM C inaccessible by the CPU. So modelling -the THS switch functionality as an SRAM region would not reflect reality. - -Since we should not rely on firmware settings, allow other code (the THS -driver) to access this register, by exporting it through the already -existing regmap. This mimics what we already do for the LDO control and -the EMAC register. - -To avoid concurrent accesses to the same register at the same time, by -the SRAM switch code and the regmap code, use the same lock to protect -the access. The regmap subsystem allows to use an existing lock, so we -just need to hook in there. - -Signed-off-by: Andre Przywara -Reviewed-by: Jernej Skrabec -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20240219153639.179814-2-andre.przywara@arm.com ---- - drivers/soc/sunxi/sunxi_sram.c | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/drivers/soc/sunxi/sunxi_sram.c -+++ b/drivers/soc/sunxi/sunxi_sram.c -@@ -284,6 +284,7 @@ EXPORT_SYMBOL(sunxi_sram_release); - struct sunxi_sramc_variant { - int num_emac_clocks; - bool has_ldo_ctrl; -+ bool has_ths_offset; - }; - - static const struct sunxi_sramc_variant sun4i_a10_sramc_variant = { -@@ -305,8 +306,10 @@ static const struct sunxi_sramc_variant - - static const struct sunxi_sramc_variant sun50i_h616_sramc_variant = { - .num_emac_clocks = 2, -+ .has_ths_offset = true, - }; - -+#define SUNXI_SRAM_THS_OFFSET_REG 0x0 - #define SUNXI_SRAM_EMAC_CLOCK_REG 0x30 - #define SUNXI_SYS_LDO_CTRL_REG 0x150 - -@@ -315,6 +318,8 @@ static bool sunxi_sram_regmap_accessible - { - const struct sunxi_sramc_variant *variant = dev_get_drvdata(dev); - -+ if (reg == SUNXI_SRAM_THS_OFFSET_REG && variant->has_ths_offset) -+ return true; - if (reg >= SUNXI_SRAM_EMAC_CLOCK_REG && - reg < SUNXI_SRAM_EMAC_CLOCK_REG + variant->num_emac_clocks * 4) - return true; -@@ -324,6 +329,20 @@ static bool sunxi_sram_regmap_accessible - return false; - } - -+static void sunxi_sram_lock(void *_lock) -+{ -+ spinlock_t *lock = _lock; -+ -+ spin_lock(lock); -+} -+ -+static void sunxi_sram_unlock(void *_lock) -+{ -+ spinlock_t *lock = _lock; -+ -+ spin_unlock(lock); -+} -+ - static struct regmap_config sunxi_sram_regmap_config = { - .reg_bits = 32, - .val_bits = 32, -@@ -333,6 +352,9 @@ static struct regmap_config sunxi_sram_r - /* other devices have no business accessing other registers */ - .readable_reg = sunxi_sram_regmap_accessible_reg, - .writeable_reg = sunxi_sram_regmap_accessible_reg, -+ .lock = sunxi_sram_lock, -+ .unlock = sunxi_sram_unlock, -+ .lock_arg = &sram_lock, - }; - - static int __init sunxi_sram_probe(struct platform_device *pdev) diff --git a/target/linux/sunxi/patches-6.1/010-v6.8-thermal-drivers-sun8i-Add-D1-T113s-THS-controller-support.patch b/target/linux/sunxi/patches-6.1/010-v6.8-thermal-drivers-sun8i-Add-D1-T113s-THS-controller-support.patch deleted file mode 100644 index 8b19989118..0000000000 --- a/target/linux/sunxi/patches-6.1/010-v6.8-thermal-drivers-sun8i-Add-D1-T113s-THS-controller-support.patch +++ /dev/null @@ -1,47 +0,0 @@ -From ebbf19e36d021f253425344b4d4b987f3b7d9be5 Mon Sep 17 00:00:00 2001 -From: Maxim Kiselev -Date: Mon, 18 Dec 2023 00:06:23 +0300 -Subject: [PATCH] thermal/drivers/sun8i: Add D1/T113s THS controller support - -This patch adds a thermal sensor controller support for the D1/T113s, -which is similar to the one on H6, but with only one sensor and -different scale and offset values. - -Signed-off-by: Maxim Kiselev -Acked-by: Jernej Skrabec -Reviewed-by: Andre Przywara -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20231217210629.131486-3-bigunclemax@gmail.com ---- - drivers/thermal/sun8i_thermal.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/drivers/thermal/sun8i_thermal.c -+++ b/drivers/thermal/sun8i_thermal.c -@@ -610,6 +610,18 @@ static const struct ths_thermal_chip sun - .calc_temp = sun8i_ths_calc_temp, - }; - -+static const struct ths_thermal_chip sun20i_d1_ths = { -+ .sensor_num = 1, -+ .has_bus_clk_reset = true, -+ .offset = 188552, -+ .scale = 673, -+ .temp_data_base = SUN50I_H6_THS_TEMP_DATA, -+ .calibrate = sun50i_h6_ths_calibrate, -+ .init = sun50i_h6_thermal_init, -+ .irq_ack = sun50i_h6_irq_ack, -+ .calc_temp = sun8i_ths_calc_temp, -+}; -+ - static const struct of_device_id of_ths_match[] = { - { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths }, - { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths }, -@@ -618,6 +630,7 @@ static const struct of_device_id of_ths_ - { .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths }, - { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths }, - { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, -+ { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths }, - { /* sentinel */ }, - }; - MODULE_DEVICE_TABLE(of, of_ths_match); diff --git a/target/linux/sunxi/patches-6.1/011-v6.9-thermal-drivers-sun8i-Explain-unknown-H6-register-value.patch b/target/linux/sunxi/patches-6.1/011-v6.9-thermal-drivers-sun8i-Explain-unknown-H6-register-value.patch deleted file mode 100644 index b8138a3870..0000000000 --- a/target/linux/sunxi/patches-6.1/011-v6.9-thermal-drivers-sun8i-Explain-unknown-H6-register-value.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 14f118aa50fe7c7c7330f56d007ecacca487cea8 Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Mon, 19 Feb 2024 15:36:35 +0000 -Subject: [PATCH] thermal/drivers/sun8i: Explain unknown H6 register value - -So far we were ORing in some "unknown" value into the THS control -register on the Allwinner H6. This part of the register is not explained -in the H6 manual, but the H616 manual details those bits, and on closer -inspection the THS IP blocks in both SoCs seem very close: -- The BSP code for both SoCs writes the same values into THS_CTRL. -- The reset values of at least the first three registers are the same. - -Replace the "unknown" value with its proper meaning: "acquire time", -most probably the sample part of the sample & hold circuit of the ADC, -according to its explanation in the H616 manual. - -No functional change, just a macro rename and adjustment. - -Signed-off-by: Andre Przywara -Reviewed-by: Jernej Skrabec -Acked-by: Vasily Khoruzhick -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20240219153639.179814-4-andre.przywara@arm.com ---- - drivers/thermal/sun8i_thermal.c | 29 ++++++++++++++++------------- - 1 file changed, 16 insertions(+), 13 deletions(-) - ---- a/drivers/thermal/sun8i_thermal.c -+++ b/drivers/thermal/sun8i_thermal.c -@@ -50,7 +50,8 @@ - #define SUN8I_THS_CTRL2_T_ACQ1(x) ((GENMASK(15, 0) & (x)) << 16) - #define SUN8I_THS_DATA_IRQ_STS(x) BIT(x + 8) - --#define SUN50I_THS_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16) -+#define SUN50I_THS_CTRL0_T_ACQ(x) (GENMASK(15, 0) & ((x) - 1)) -+#define SUN50I_THS_CTRL0_T_SAMPLE_PER(x) ((GENMASK(15, 0) & ((x) - 1)) << 16) - #define SUN50I_THS_FILTER_EN BIT(2) - #define SUN50I_THS_FILTER_TYPE(x) (GENMASK(1, 0) & (x)) - #define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12) -@@ -410,25 +411,27 @@ static int sun8i_h3_thermal_init(struct - return 0; - } - --/* -- * Without this undocumented value, the returned temperatures would -- * be higher than real ones by about 20C. -- */ --#define SUN50I_H6_CTRL0_UNK 0x0000002f -- - static int sun50i_h6_thermal_init(struct ths_device *tmdev) - { - int val; - - /* -- * T_acq = 20us -- * clkin = 24MHz -- * -- * x = T_acq * clkin - 1 -- * = 479 -+ * The manual recommends an overall sample frequency of 50 KHz (20us, -+ * 480 cycles at 24 MHz), which provides plenty of time for both the -+ * acquisition time (>24 cycles) and the actual conversion time -+ * (>14 cycles). -+ * The lower half of the CTRL register holds the "acquire time", in -+ * clock cycles, which the manual recommends to be 2us: -+ * 24MHz * 2us = 48 cycles. -+ * The high half of THS_CTRL encodes the sample frequency, in clock -+ * cycles: 24MHz * 20us = 480 cycles. -+ * This is explained in the H616 manual, but apparently wrongly -+ * described in the H6 manual, although the BSP code does the same -+ * for both SoCs. - */ - regmap_write(tmdev->regmap, SUN50I_THS_CTRL0, -- SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479)); -+ SUN50I_THS_CTRL0_T_ACQ(48) | -+ SUN50I_THS_CTRL0_T_SAMPLE_PER(480)); - /* average over 4 samples */ - regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC, - SUN50I_THS_FILTER_EN | diff --git a/target/linux/sunxi/patches-6.1/012-v6.9-thermal-drivers-sun8i-Extend-H6-calibration-to-support-4.patch b/target/linux/sunxi/patches-6.1/012-v6.9-thermal-drivers-sun8i-Extend-H6-calibration-to-support-4.patch deleted file mode 100644 index 3d01a507fa..0000000000 --- a/target/linux/sunxi/patches-6.1/012-v6.9-thermal-drivers-sun8i-Extend-H6-calibration-to-support-4.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 6c04a419a4c5fb18edefc44dd676fb95c7f6c55d Mon Sep 17 00:00:00 2001 -From: Maksim Kiselev -Date: Mon, 19 Feb 2024 15:36:36 +0000 -Subject: [PATCH] thermal/drivers/sun8i: Extend H6 calibration to support 4 - sensors - -The H616 SoC resembles the H6 thermal sensor controller, with a few -changes like four sensors. - -Extend sun50i_h6_ths_calibrate() function to support calibration of -these sensors. - -Co-developed-by: Martin Botka -Signed-off-by: Martin Botka -Signed-off-by: Maksim Kiselev -Reviewed-by: Andre Przywara -Signed-off-by: Andre Przywara -Reviewed-by: Jernej Skrabec -Acked-by: Vasily Khoruzhick -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20240219153639.179814-5-andre.przywara@arm.com ---- - drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++-------- - 1 file changed, 20 insertions(+), 8 deletions(-) - ---- a/drivers/thermal/sun8i_thermal.c -+++ b/drivers/thermal/sun8i_thermal.c -@@ -224,16 +224,21 @@ static int sun50i_h6_ths_calibrate(struc - struct device *dev = tmdev->dev; - int i, ft_temp; - -- if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) -+ if (!caldata[0]) - return -EINVAL; - - /* - * efuse layout: - * -- * 0 11 16 32 -- * +-------+-------+-------+ -- * |temp| |sensor0|sensor1| -- * +-------+-------+-------+ -+ * 0 11 16 27 32 43 48 57 -+ * +----------+-----------+-----------+-----------+ -+ * | temp | |sensor0| |sensor1| |sensor2| | -+ * +----------+-----------+-----------+-----------+ -+ * ^ ^ ^ -+ * | | | -+ * | | sensor3[11:8] -+ * | sensor3[7:4] -+ * sensor3[3:0] - * - * The calibration data on the H6 is the ambient temperature and - * sensor values that are filled during the factory test stage. -@@ -246,9 +251,16 @@ static int sun50i_h6_ths_calibrate(struc - ft_temp = (caldata[0] & FT_TEMP_MASK) * 100; - - for (i = 0; i < tmdev->chip->sensor_num; i++) { -- int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; -- int cdata, offset; -- int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); -+ int sensor_reg, sensor_temp, cdata, offset; -+ -+ if (i == 3) -+ sensor_reg = (caldata[1] >> 12) -+ | ((caldata[2] >> 12) << 4) -+ | ((caldata[3] >> 12) << 8); -+ else -+ sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; -+ -+ sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); - - /* - * Calibration data is CALIBRATE_DEFAULT - (calculated diff --git a/target/linux/sunxi/patches-6.1/013-v6.9-thermal-drivers-sun8i-Add-SRAM-register-access-code.patch b/target/linux/sunxi/patches-6.1/013-v6.9-thermal-drivers-sun8i-Add-SRAM-register-access-code.patch deleted file mode 100644 index 6db1e32cfb..0000000000 --- a/target/linux/sunxi/patches-6.1/013-v6.9-thermal-drivers-sun8i-Add-SRAM-register-access-code.patch +++ /dev/null @@ -1,126 +0,0 @@ -From f8b54d1120b81ed57bed96cc8e814ba08886d1e5 Mon Sep 17 00:00:00 2001 -From: Andre Przywara -Date: Mon, 19 Feb 2024 15:36:37 +0000 -Subject: [PATCH] thermal/drivers/sun8i: Add SRAM register access code - -The Allwinner H616 SoC needs to clear a bit in one register in the SRAM -controller, to report reasonable temperature values. On reset, bit 16 in -register 0x3000000 is set, which leads to the driver reporting -temperatures around 200C. Clearing this bit brings the values down to the -expected range. The BSP code does a one-time write in U-Boot, with a -comment just mentioning the effect on the THS, but offering no further -explanation. - -To not rely on firmware to set things up for us, add code that queries -the SRAM controller device via a DT phandle link, then clear just this -single bit. - -Signed-off-by: Andre Przywara -Acked-by: Vasily Khoruzhick -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20240219153639.179814-6-andre.przywara@arm.com ---- - drivers/thermal/sun8i_thermal.c | 51 +++++++++++++++++++++++++++++++++ - 1 file changed, 51 insertions(+) - ---- a/drivers/thermal/sun8i_thermal.c -+++ b/drivers/thermal/sun8i_thermal.c -@@ -15,6 +15,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -68,6 +69,7 @@ struct tsensor { - struct ths_thermal_chip { - bool has_mod_clk; - bool has_bus_clk_reset; -+ bool needs_sram; - int sensor_num; - int offset; - int scale; -@@ -85,12 +87,16 @@ struct ths_device { - const struct ths_thermal_chip *chip; - struct device *dev; - struct regmap *regmap; -+ struct regmap_field *sram_regmap_field; - struct reset_control *reset; - struct clk *bus_clk; - struct clk *mod_clk; - struct tsensor sensor[MAX_SENSOR_NUM]; - }; - -+/* The H616 needs to have a bit 16 in the SRAM control register cleared. */ -+static const struct reg_field sun8i_ths_sram_reg_field = REG_FIELD(0x0, 16, 16); -+ - /* Temp Unit: millidegree Celsius */ - static int sun8i_ths_calc_temp(struct ths_device *tmdev, - int id, int reg) -@@ -337,6 +343,34 @@ static void sun8i_ths_reset_control_asse - reset_control_assert(data); - } - -+static struct regmap *sun8i_ths_get_sram_regmap(struct device_node *node) -+{ -+ struct device_node *sram_node; -+ struct platform_device *sram_pdev; -+ struct regmap *regmap = NULL; -+ -+ sram_node = of_parse_phandle(node, "allwinner,sram", 0); -+ if (!sram_node) -+ return ERR_PTR(-ENODEV); -+ -+ sram_pdev = of_find_device_by_node(sram_node); -+ if (!sram_pdev) { -+ /* platform device might not be probed yet */ -+ regmap = ERR_PTR(-EPROBE_DEFER); -+ goto out_put_node; -+ } -+ -+ /* If no regmap is found then the other device driver is at fault */ -+ regmap = dev_get_regmap(&sram_pdev->dev, NULL); -+ if (!regmap) -+ regmap = ERR_PTR(-EINVAL); -+ -+ platform_device_put(sram_pdev); -+out_put_node: -+ of_node_put(sram_node); -+ return regmap; -+} -+ - static int sun8i_ths_resource_init(struct ths_device *tmdev) - { - struct device *dev = tmdev->dev; -@@ -381,6 +415,19 @@ static int sun8i_ths_resource_init(struc - if (ret) - return ret; - -+ if (tmdev->chip->needs_sram) { -+ struct regmap *regmap; -+ -+ regmap = sun8i_ths_get_sram_regmap(dev->of_node); -+ if (IS_ERR(regmap)) -+ return PTR_ERR(regmap); -+ tmdev->sram_regmap_field = devm_regmap_field_alloc(dev, -+ regmap, -+ sun8i_ths_sram_reg_field); -+ if (IS_ERR(tmdev->sram_regmap_field)) -+ return PTR_ERR(tmdev->sram_regmap_field); -+ } -+ - ret = sun8i_ths_calibrate(tmdev); - if (ret) - return ret; -@@ -427,6 +474,10 @@ static int sun50i_h6_thermal_init(struct - { - int val; - -+ /* The H616 needs to have a bit in the SRAM control register cleared. */ -+ if (tmdev->sram_regmap_field) -+ regmap_field_write(tmdev->sram_regmap_field, 0); -+ - /* - * The manual recommends an overall sample frequency of 50 KHz (20us, - * 480 cycles at 24 MHz), which provides plenty of time for both the diff --git a/target/linux/sunxi/patches-6.1/014-v6.9-thermal-drivers-sun8i-Add-support-for-H616-THS-controller.patch b/target/linux/sunxi/patches-6.1/014-v6.9-thermal-drivers-sun8i-Add-support-for-H616-THS-controller.patch deleted file mode 100644 index e743d344c6..0000000000 --- a/target/linux/sunxi/patches-6.1/014-v6.9-thermal-drivers-sun8i-Add-support-for-H616-THS-controller.patch +++ /dev/null @@ -1,50 +0,0 @@ -From e7dbfa19572a1440a2e67ef70f94ff204849a0a8 Mon Sep 17 00:00:00 2001 -From: Martin Botka -Date: Mon, 19 Feb 2024 15:36:38 +0000 -Subject: [PATCH] thermal/drivers/sun8i: Add support for H616 THS controller - -Add support for the thermal sensor found in H616 SoCs, is the same as -the H6 thermal sensor controller, but with four sensors. -Also the registers readings are wrong, unless a bit in the first SYS_CFG -register cleared, so set exercise the SRAM regmap to take care of that. - -Signed-off-by: Martin Botka -Signed-off-by: Andre Przywara -Acked-by: Vasily Khoruzhick -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20240219153639.179814-7-andre.przywara@arm.com ---- - drivers/thermal/sun8i_thermal.c | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/drivers/thermal/sun8i_thermal.c -+++ b/drivers/thermal/sun8i_thermal.c -@@ -688,6 +688,20 @@ static const struct ths_thermal_chip sun - .calc_temp = sun8i_ths_calc_temp, - }; - -+static const struct ths_thermal_chip sun50i_h616_ths = { -+ .sensor_num = 4, -+ .has_bus_clk_reset = true, -+ .needs_sram = true, -+ .ft_deviation = 8000, -+ .offset = 263655, -+ .scale = 810, -+ .temp_data_base = SUN50I_H6_THS_TEMP_DATA, -+ .calibrate = sun50i_h6_ths_calibrate, -+ .init = sun50i_h6_thermal_init, -+ .irq_ack = sun50i_h6_irq_ack, -+ .calc_temp = sun8i_ths_calc_temp, -+}; -+ - static const struct of_device_id of_ths_match[] = { - { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths }, - { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths }, -@@ -697,6 +711,7 @@ static const struct of_device_id of_ths_ - { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths }, - { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, - { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths }, -+ { .compatible = "allwinner,sun50i-h616-ths", .data = &sun50i_h616_ths }, - { /* sentinel */ }, - }; - MODULE_DEVICE_TABLE(of, of_ths_match); diff --git a/target/linux/sunxi/patches-6.1/015-v6.9-thermal-drivers-sun8i-Dont-fail-probe-due-to-zone-registra.patch b/target/linux/sunxi/patches-6.1/015-v6.9-thermal-drivers-sun8i-Dont-fail-probe-due-to-zone-registra.patch deleted file mode 100644 index 384bf55084..0000000000 --- a/target/linux/sunxi/patches-6.1/015-v6.9-thermal-drivers-sun8i-Dont-fail-probe-due-to-zone-registra.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 9ac53d5532cc4bb595bbee86ccba2172ccc336c3 Mon Sep 17 00:00:00 2001 -From: Mark Brown -Date: Tue, 23 Jan 2024 23:33:07 +0000 -Subject: [PATCH] thermal/drivers/sun8i: Don't fail probe due to zone - registration failure - -Currently the sun8i thermal driver will fail to probe if any of the -thermal zones it is registering fails to register with the thermal core. -Since we currently do not define any trip points for the GPU thermal -zones on at least A64 or H5 this means that we have no thermal support -on these platforms: - -[ 1.698703] thermal_sys: Failed to find 'trips' node -[ 1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1 - -even though the main CPU thermal zone on both SoCs is fully configured. -This does not seem ideal, while we may not be able to use all the zones -it seems better to have those zones which are usable be operational. -Instead just carry on registering zones if we get any non-deferral -error, allowing use of those zones which are usable. - -This means that we also need to update the interrupt handler to not -attempt to notify the core for events on zones which we have not -registered, I didn't see an ability to mask individual interrupts and -I would expect that interrupts would still be indicated in the ISR even -if they were masked. - -Reviewed-by: Vasily Khoruzhick -Acked-by: Jernej Skrabec -Signed-off-by: Mark Brown -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20240123-thermal-sun8i-registration-v3-1-3e5771b1bbdd@kernel.org ---- - drivers/thermal/sun8i_thermal.c | 16 ++++++++++++++-- - 1 file changed, 14 insertions(+), 2 deletions(-) - ---- a/drivers/thermal/sun8i_thermal.c -+++ b/drivers/thermal/sun8i_thermal.c -@@ -197,6 +197,9 @@ static irqreturn_t sun8i_irq_thread(int - int i; - - for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) { -+ /* We allow some zones to not register. */ -+ if (IS_ERR(tmdev->sensor[i].tzd)) -+ continue; - thermal_zone_device_update(tmdev->sensor[i].tzd, - THERMAL_EVENT_UNSPECIFIED); - } -@@ -531,8 +534,17 @@ static int sun8i_ths_register(struct ths - i, - &tmdev->sensor[i], - &ths_ops); -- if (IS_ERR(tmdev->sensor[i].tzd)) -- return PTR_ERR(tmdev->sensor[i].tzd); -+ -+ /* -+ * If an individual zone fails to register for reasons -+ * other than probe deferral (eg, a bad DT) then carry -+ * on, other zones might register successfully. -+ */ -+ if (IS_ERR(tmdev->sensor[i].tzd)) { -+ if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER) -+ return PTR_ERR(tmdev->sensor[i].tzd); -+ continue; -+ } - - if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd)) - dev_warn(tmdev->dev, diff --git a/target/linux/sunxi/patches-6.1/016-v6.9-arm64-dts-allwinner-h616-Add-thermal-sensor-and-zones.patch b/target/linux/sunxi/patches-6.1/016-v6.9-arm64-dts-allwinner-h616-Add-thermal-sensor-and-zones.patch deleted file mode 100644 index cd6542bf14..0000000000 --- a/target/linux/sunxi/patches-6.1/016-v6.9-arm64-dts-allwinner-h616-Add-thermal-sensor-and-zones.patch +++ /dev/null @@ -1,138 +0,0 @@ -From f4318af40544b8e7ff5a6b667ede60e6cf808262 Mon Sep 17 00:00:00 2001 -From: Martin Botka -Date: Mon, 19 Feb 2024 15:36:39 +0000 -Subject: [PATCH] arm64: dts: allwinner: h616: Add thermal sensor and zones - -There are four thermal sensors: -- CPU -- GPU -- VE -- DRAM - -Add the thermal sensor configuration and the thermal zones. - -Signed-off-by: Martin Botka -Signed-off-by: Andre Przywara -Reviewed-by: Jernej Skrabec -Link: https://lore.kernel.org/r/20240219153639.179814-8-andre.przywara@arm.com -Signed-off-by: Jernej Skrabec ---- - .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++ - 1 file changed, 88 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi -@@ -9,6 +9,7 @@ - #include - #include - #include -+#include - - / { - interrupt-parent = <&gic>; -@@ -138,6 +139,10 @@ - reg = <0x03006000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; -+ -+ ths_calibration: thermal-sensor-calibration@14 { -+ reg = <0x14 0x8>; -+ }; - }; - - watchdog: watchdog@30090a0 { -@@ -511,6 +516,19 @@ - }; - }; - -+ ths: thermal-sensor@5070400 { -+ compatible = "allwinner,sun50i-h616-ths"; -+ reg = <0x05070400 0x400>; -+ interrupts = ; -+ clocks = <&ccu CLK_BUS_THS>; -+ clock-names = "bus"; -+ resets = <&ccu RST_BUS_THS>; -+ nvmem-cells = <&ths_calibration>; -+ nvmem-cell-names = "calibration"; -+ allwinner,sram = <&syscon>; -+ #thermal-sensor-cells = <1>; -+ }; -+ - usbotg: usb@5100000 { - compatible = "allwinner,sun50i-h616-musb", - "allwinner,sun8i-h3-musb"; -@@ -755,4 +773,74 @@ - #size-cells = <0>; - }; - }; -+ -+ thermal-zones { -+ cpu-thermal { -+ polling-delay-passive = <500>; -+ polling-delay = <1000>; -+ thermal-sensors = <&ths 2>; -+ sustainable-power = <1000>; -+ -+ trips { -+ cpu_threshold: cpu-trip-0 { -+ temperature = <60000>; -+ type = "passive"; -+ hysteresis = <0>; -+ }; -+ cpu_target: cpu-trip-1 { -+ temperature = <70000>; -+ type = "passive"; -+ hysteresis = <0>; -+ }; -+ cpu_critical: cpu-trip-2 { -+ temperature = <110000>; -+ type = "critical"; -+ hysteresis = <0>; -+ }; -+ }; -+ }; -+ -+ gpu-thermal { -+ polling-delay-passive = <500>; -+ polling-delay = <1000>; -+ thermal-sensors = <&ths 0>; -+ sustainable-power = <1100>; -+ -+ trips { -+ gpu_temp_critical: gpu-trip-0 { -+ temperature = <110000>; -+ type = "critical"; -+ hysteresis = <0>; -+ }; -+ }; -+ }; -+ -+ ve-thermal { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&ths 1>; -+ -+ trips { -+ ve_temp_critical: ve-trip-0 { -+ temperature = <110000>; -+ type = "critical"; -+ hysteresis = <0>; -+ }; -+ }; -+ }; -+ -+ ddr-thermal { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&ths 3>; -+ -+ trips { -+ ddr_temp_critical: ddr-trip-0 { -+ temperature = <110000>; -+ type = "critical"; -+ hysteresis = <0>; -+ }; -+ }; -+ }; -+ }; - }; diff --git a/target/linux/sunxi/patches-6.1/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch b/target/linux/sunxi/patches-6.1/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch deleted file mode 100644 index 30c98aa737..0000000000 --- a/target/linux/sunxi/patches-6.1/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch +++ /dev/null @@ -1,30 +0,0 @@ -From a896bc1d79e3c00f0aacfe225499d811775616f3 Mon Sep 17 00:00:00 2001 -From: Chukun Pan -Date: Sun, 10 Oct 2021 21:50:17 +0800 -Subject: [PATCH] arm64: allwinner: add OF node for USB eth on NanoPi R1S H5 - -This adds the OF node for the USB3 ethernet adapter on the FriendlyARM -NanoPi R1S H5. Add the correct value for the RTL8153 LED configuration -register to match the blink behavior of the other port on the device. - -Signed-off-by: Chukun Pan ---- - arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts -@@ -116,6 +116,13 @@ - - &ehci1 { - status = "okay"; -+ -+ usb-eth@1 { -+ compatible = "realtek,rtl8153"; -+ reg = <1>; -+ -+ realtek,led-data = <0x78>; -+ }; - }; - - &ehci2 { diff --git a/target/linux/sunxi/patches-6.1/301-orangepi_pc2_usb_otg_to_host_key_power.patch b/target/linux/sunxi/patches-6.1/301-orangepi_pc2_usb_otg_to_host_key_power.patch deleted file mode 100644 index 2c5ccd7d96..0000000000 --- a/target/linux/sunxi/patches-6.1/301-orangepi_pc2_usb_otg_to_host_key_power.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts -@@ -59,7 +59,7 @@ - - key-sw4 { - label = "sw4"; -- linux,code = ; -+ linux,code = ; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - wakeup-source; - }; -@@ -220,7 +220,7 @@ - }; - - &usb_otg { -- dr_mode = "otg"; -+ dr_mode = "host"; - status = "okay"; - }; - diff --git a/target/linux/sunxi/patches-6.1/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch b/target/linux/sunxi/patches-6.1/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch deleted file mode 100644 index a8dfcd9dbc..0000000000 --- a/target/linux/sunxi/patches-6.1/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001 -From: Oskari Lemmela -Date: Mon, 31 Dec 2018 07:44:49 +0200 -Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions. - -First 896kB to u-boot. Enough space for SPL, u-boot and ATF. -Next 128kB to u-boot environment and rest to firmware. - -Firmware partition is compatible FIT image dynamic splitting. - -Signed-off-by: Oskari Lemmela ---- - .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi -@@ -58,6 +58,28 @@ - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x000000 0x0E0000>; -+ }; -+ -+ partition@e0000 { -+ label = "u-boot-env"; -+ reg = <0x0E0000 0x020000>; -+ }; -+ -+ partition@100000 { -+ compatible = "denx,fit"; -+ label = "firmware"; -+ reg = <0x100000 0xF00000>; -+ }; -+ }; - }; - }; - diff --git a/target/linux/sunxi/patches-6.1/410-sunxi-add-bananapi-p2-zero.patch b/target/linux/sunxi/patches-6.1/410-sunxi-add-bananapi-p2-zero.patch deleted file mode 100644 index 5b8dd170c5..0000000000 --- a/target/linux/sunxi/patches-6.1/410-sunxi-add-bananapi-p2-zero.patch +++ /dev/null @@ -1,292 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -1352,6 +1352,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a83t-cubietruck-plus.dtb \ - sun8i-a83t-tbs-a711.dtb \ - sun8i-h2-plus-bananapi-m2-zero.dtb \ -+ sun8i-h2-plus-bananapi-p2-zero.dtb \ - sun8i-h2-plus-libretech-all-h3-cc.dtb \ - sun8i-h2-plus-orangepi-r1.dtb \ - sun8i-h2-plus-orangepi-zero.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-p2-zero.dts -@@ -0,0 +1,279 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright (C) 2023 Zoltan HERPAI -+ * -+ * Based on sun8i-h2-plus-bananapi-m2-zero.dts, which is: -+ * Copyright (C) 2017 Icenowy Zheng -+ */ -+ -+/dts-v1/; -+#include "sun8i-h3.dtsi" -+#include "sunxi-common-regulators.dtsi" -+ -+#include -+#include -+ -+/ { -+ model = "Banana Pi BPI-P2-Zero"; -+ compatible = "sinovoip,bpi-p2-zero", "allwinner,sun8i-h2-plus"; -+ -+ aliases { -+ serial0 = &uart0; -+ serial1 = &uart1; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ connector { -+ compatible = "hdmi-connector"; -+ type = "c"; -+ -+ port { -+ hdmi_con_in: endpoint { -+ remote-endpoint = <&hdmi_out_con>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ pwr_led { -+ label = "bananapi-p2-zero:red:pwr"; -+ gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ -+ default-state = "on"; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ -+ sw4 { -+ label = "power"; -+ linux,code = ; -+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ reg_vdd_cpux: vdd-cpux-regulator { -+ compatible = "regulator-gpio"; -+ regulator-name = "vdd-cpux"; -+ regulator-type = "voltage"; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1300000>; -+ regulator-ramp-delay = <50>; /* 4ms */ -+ -+ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ -+ enable-active-high; -+ gpios-states = <0x1>; -+ states = <1100000 0>, <1300000 1>; -+ }; -+ -+ reg_vcc_dram: vcc-dram { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc-dram"; -+ regulator-min-microvolt = <1500000>; -+ regulator-max-microvolt = <1500000>; -+ regulator-always-on; -+ regulator-boot-on; -+ enable-active-high; -+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ -+ vin-supply = <®_vcc5v0>; -+ }; -+ -+ reg_vcc1v2: vcc1v2 { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc1v2"; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1200000>; -+ regulator-always-on; -+ regulator-boot-on; -+ enable-active-high; -+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ -+ vin-supply = <®_vcc5v0>; -+ }; -+ -+ poweroff { -+ compatible = "regulator-poweroff"; -+ cpu-supply = <®_vcc1v2>; -+ }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ -+ clocks = <&rtc 1>; -+ clock-names = "ext_clock"; -+ }; -+}; -+ -+&cpu0 { -+ cpu-supply = <®_vdd_cpux>; -+}; -+ -+&de { -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&emac { -+ phy-handle = <&int_mii_phy>; -+ phy-mode = "mii"; -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ -+&hdmi { -+ status = "okay"; -+}; -+ -+&hdmi_out { -+ hdmi_out_con: endpoint { -+ remote-endpoint = <&hdmi_con_in>; -+ }; -+}; -+ -+&mmc0 { -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ /* -+ * On the production batch of this board the card detect GPIO is -+ * high active (card inserted), although on the early samples it's -+ * low active. -+ */ -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ -+ status = "okay"; -+}; -+ -+&mmc1 { -+ vmmc-supply = <®_vcc3v3>; -+ vqmmc-supply = <®_vcc3v3>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ brcmf: wifi@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ interrupt-parent = <&pio>; -+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ -+ interrupt-names = "host-wake"; -+ }; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pa_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; -+ uart-has-rtscts; -+ status = "okay"; -+ -+ bluetooth { -+ compatible = "brcm,bcm43438-bt"; -+ max-speed = <1500000>; -+ clocks = <&rtc 1>; -+ clock-names = "lpo"; -+ vbat-supply = <®_vcc3v3>; -+ vddio-supply = <®_vcc3v3>; -+ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ -+ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ -+ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ -+ }; -+ -+}; -+ -+&pio { -+ gpio-line-names = -+ /* PA */ -+ "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15", -+ "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29", -+ "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05", -+ "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16", -+ "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27", -+ "CON2-P40", "CON2-P38", "", "", -+ "", "", "", "", "", "", "", "", -+ -+ /* PB */ -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ -+ /* PC */ -+ "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24", -+ "CON2-P18", "", "", "CON2-P26", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ -+ /* PD */ -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "CSI-PWR-EN", "", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ -+ /* PE */ -+ "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07", -+ "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20", -+ "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12", -+ "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ -+ /* PF */ -+ "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", -+ "SDC0-D2", "SDC0-DET", "", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ -+ /* PG */ -+ "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1", -+ "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX", -+ "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP", -+ "BT-RST-N", "AP-WAKE-BT", "", "", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", ""; -+}; -+ -+&r_pio { -+ gpio-line-names = -+ /* PL */ -+ "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36", -+ "VCC-IO-EN", "USB0-ID", "WL-PWR-EN", -+ "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "", -+ "", "", "", "", "", "", "", "", -+ "", "", "", "", "", "", "", ""; -+}; -+ -+&usb_otg { -+ dr_mode = "otg"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ -+ /* -+ * There're two micro-USB connectors, one is power-only and another is -+ * OTG. The Vbus of these two connectors are connected together, so -+ * the external USB device will be powered just by the power input -+ * from the power-only USB port. -+ */ -+ status = "okay"; -+}; diff --git a/target/linux/sunxi/patches-6.1/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch b/target/linux/sunxi/patches-6.1/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch deleted file mode 100644 index 68ec333e37..0000000000 --- a/target/linux/sunxi/patches-6.1/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Petr=20=C5=A0tetiar?= -Date: Thu, 26 Mar 2020 10:09:19 +0100 -Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add status LED aliases -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Petr Å tetiar - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts -@@ -15,6 +15,10 @@ - aliases { - ethernet0 = &emac; - serial0 = &uart0; -+ led-boot = &led_user; -+ led-failsafe = &led_user; -+ led-running = &led_user; -+ led-upgrade = &led_user; - }; - - chosen { -@@ -35,7 +39,7 @@ - leds { - compatible = "gpio-leds"; - -- led-0 { -+ led_user: led-0 { - label = "a64-olinuxino:red:user"; - gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ - }; diff --git a/target/linux/sunxi/patches-6.1/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch b/target/linux/sunxi/patches-6.1/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch deleted file mode 100644 index 8670d06109..0000000000 --- a/target/linux/sunxi/patches-6.1/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 1845163a052efac124f00656eb72f38947630a42 Mon Sep 17 00:00:00 2001 -From: Chukun Pan -Date: Sun, 10 Oct 2021 21:50:18 +0800 -Subject: [PATCH] arm64: dts: allwinner: NanoPi R1S H5: add status LED aliases - -Use the SYS LED on the casing for showing system status. - -Signed-off-by: Chukun Pan ---- - arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts -@@ -23,6 +23,11 @@ - ethernet0 = &emac; - ethernet1 = &rtl8189etv; - serial0 = &uart0; -+ -+ led-boot = &led_sys; -+ led-failsafe = &led_sys; -+ led-running = &led_sys; -+ led-upgrade = &led_sys; - }; - - chosen { -@@ -38,7 +43,7 @@ - gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; - }; - -- led-1 { -+ led_sys: led-1 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/sunxi/patches-6.1/442-arm64-dts-orangepi-one-plus-enable-PWM.patch b/target/linux/sunxi/patches-6.1/442-arm64-dts-orangepi-one-plus-enable-PWM.patch deleted file mode 100644 index 76a73ee1f0..0000000000 --- a/target/linux/sunxi/patches-6.1/442-arm64-dts-orangepi-one-plus-enable-PWM.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts -@@ -41,3 +41,7 @@ - reg = <1>; - }; - }; -+ -+&pwm { -+ status = "okay"; -+}; diff --git a/target/linux/sunxi/patches-6.1/450-arm64-dts-enable-wifi-on-pine64-boards.patch b/target/linux/sunxi/patches-6.1/450-arm64-dts-enable-wifi-on-pine64-boards.patch deleted file mode 100644 index 3876852c2b..0000000000 --- a/target/linux/sunxi/patches-6.1/450-arm64-dts-enable-wifi-on-pine64-boards.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts -@@ -42,6 +42,11 @@ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ -+ }; - }; - - &ac_power_supply { -@@ -102,6 +107,21 @@ - reg = <1>; - }; - }; -+ -+&mmc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc1_pins>; -+ vmmc-supply = <®_dldo4>; -+ vqmmc-supply = <®_eldo1>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ rtl8723cs: wifi@1 { -+ reg = <1>; -+ }; -+}; - - &mmc2 { - pinctrl-names = "default"; ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts -@@ -35,6 +35,11 @@ - }; - }; - }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ -+ }; - }; - - &codec { -@@ -124,6 +129,21 @@ - status = "okay"; - }; - -+&mmc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc1_pins>; -+ vmmc-supply = <®_dldo4>; -+ vqmmc-supply = <®_eldo1>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ rtl8723cs: wifi@1 { -+ reg = <1>; -+ }; -+}; -+ - &ohci0 { - status = "okay"; - }; diff --git a/target/linux/sunxi/patches-6.6/001-v6.2-dt-bindings-usb-Add-H616-compatible-string.patch b/target/linux/sunxi/patches-6.6/001-v6.2-dt-bindings-usb-Add-H616-compatible-string.patch new file mode 100644 index 0000000000..c24d479534 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/001-v6.2-dt-bindings-usb-Add-H616-compatible-string.patch @@ -0,0 +1,38 @@ +From 28a1a6474c5053bae01bd29946b4d5ede539176b Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Mon, 31 Oct 2022 11:13:52 +0000 +Subject: [PATCH] dt-bindings: usb: Add H616 compatible string + +The Allwinner H616 contains four fully OHCI/EHCI compatible USB host +controllers, so just add their compatible strings to the list of +generic OHCI/EHCI controllers. + +Signed-off-by: Andre Przywara +Acked-by: Krzysztof Kozlowski +Link: https://lore.kernel.org/r/20221031111358.3387297-2-andre.przywara@arm.com +Signed-off-by: Jernej Skrabec +--- + Documentation/devicetree/bindings/usb/generic-ehci.yaml | 1 + + Documentation/devicetree/bindings/usb/generic-ohci.yaml | 1 + + 2 files changed, 2 insertions(+) + +--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml ++++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml +@@ -30,6 +30,7 @@ properties: + - allwinner,sun4i-a10-ehci + - allwinner,sun50i-a64-ehci + - allwinner,sun50i-h6-ehci ++ - allwinner,sun50i-h616-ehci + - allwinner,sun5i-a13-ehci + - allwinner,sun6i-a31-ehci + - allwinner,sun7i-a20-ehci +--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml ++++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml +@@ -20,6 +20,7 @@ properties: + - allwinner,sun4i-a10-ohci + - allwinner,sun50i-a64-ohci + - allwinner,sun50i-h6-ohci ++ - allwinner,sun50i-h616-ohci + - allwinner,sun5i-a13-ohci + - allwinner,sun6i-a31-ohci + - allwinner,sun7i-a20-ohci diff --git a/target/linux/sunxi/patches-6.6/002-v6.2-dt-bindings-phy-Add-special-clock-for-Allwinner-H616-PHY.patch b/target/linux/sunxi/patches-6.6/002-v6.2-dt-bindings-phy-Add-special-clock-for-Allwinner-H616-PHY.patch new file mode 100644 index 0000000000..5739172ceb --- /dev/null +++ b/target/linux/sunxi/patches-6.6/002-v6.2-dt-bindings-phy-Add-special-clock-for-Allwinner-H616-PHY.patch @@ -0,0 +1,79 @@ +From 6964affe65066651eca21e97247d3b7cac5153dc Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Mon, 31 Oct 2022 11:13:53 +0000 +Subject: [PATCH] dt-bindings: phy: Add special clock for Allwinner H616 PHY + +The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves +some resources from port 2's PHY and HCI IP. In particular the PMU clock +for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL +register of port 2. To allow each USB port to be controlled +independently of port 2, we need a handle to that particular PMU clock +in the *PHY* node, as the HCI and PHY part might be handled by separate +drivers. + +Add that clock to the requirements of the H616 PHY binding, so that a +PHY driver can apply the quirk in isolation, without requiring help from +port 2's HCI driver. + +Signed-off-by: Andre Przywara +Reviewed-by: Rob Herring +Link: https://lore.kernel.org/r/20221031111358.3387297-3-andre.przywara@arm.com +Signed-off-by: Vinod Koul +--- + .../phy/allwinner,sun8i-h3-usb-phy.yaml | 26 +++++++++++++++++++ + 1 file changed, 26 insertions(+) + +--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml ++++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml +@@ -36,18 +36,22 @@ properties: + - const: pmu3 + + clocks: ++ minItems: 4 + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + - description: USB Host 2 PHY bus clock ++ - description: PMU clock for host port 2 + + clock-names: ++ minItems: 4 + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + - const: usb3_phy ++ - const: pmu2_clk + + resets: + items: +@@ -96,6 +100,28 @@ required: + - resets + - reset-names + ++allOf: ++ - if: ++ properties: ++ compatible: ++ contains: ++ enum: ++ - allwinner,sun50i-h616-usb-phy ++ then: ++ properties: ++ clocks: ++ minItems: 5 ++ ++ clock-names: ++ minItems: 5 ++ else: ++ properties: ++ clocks: ++ maxItems: 4 ++ ++ clock-names: ++ maxItems: 4 ++ + additionalProperties: false + + examples: diff --git a/target/linux/sunxi/patches-6.6/003-v6.2-arm64-dts-allwinner-h616-Add-USB-nodes.patch b/target/linux/sunxi/patches-6.6/003-v6.2-arm64-dts-allwinner-h616-Add-USB-nodes.patch new file mode 100644 index 0000000000..6dc1cf2f36 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/003-v6.2-arm64-dts-allwinner-h616-Add-USB-nodes.patch @@ -0,0 +1,188 @@ +From f40cf244c3feb4e1a442f8029b691add2c65b3ab Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Mon, 31 Oct 2022 11:13:56 +0000 +Subject: [PATCH] arm64: dts: allwinner: h616: Add USB nodes + +Add the nodes for the MUSB and the four USB host controllers to the SoC +.dtsi, along with the PHY node needed to bind all of them together. + +EHCI/OHCI and MUSB are compatible to previous SoCs, but the PHY requires +some quirks (handled in the driver). + +Signed-off-by: Andre Przywara +Reviewed-by: Jernej Skrabec +Link: https://lore.kernel.org/r/20221031111358.3387297-6-andre.przywara@arm.com +Signed-off-by: Jernej Skrabec +--- + .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++ + 1 file changed, 160 insertions(+) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +@@ -504,6 +504,166 @@ + }; + }; + ++ usbotg: usb@5100000 { ++ compatible = "allwinner,sun50i-h616-musb", ++ "allwinner,sun8i-h3-musb"; ++ reg = <0x05100000 0x0400>; ++ clocks = <&ccu CLK_BUS_OTG>; ++ resets = <&ccu RST_BUS_OTG>; ++ interrupts = ; ++ interrupt-names = "mc"; ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ extcon = <&usbphy 0>; ++ status = "disabled"; ++ }; ++ ++ usbphy: phy@5100400 { ++ compatible = "allwinner,sun50i-h616-usb-phy"; ++ reg = <0x05100400 0x24>, ++ <0x05101800 0x14>, ++ <0x05200800 0x14>, ++ <0x05310800 0x14>, ++ <0x05311800 0x14>; ++ reg-names = "phy_ctrl", ++ "pmu0", ++ "pmu1", ++ "pmu2", ++ "pmu3"; ++ clocks = <&ccu CLK_USB_PHY0>, ++ <&ccu CLK_USB_PHY1>, ++ <&ccu CLK_USB_PHY2>, ++ <&ccu CLK_USB_PHY3>, ++ <&ccu CLK_BUS_EHCI2>; ++ clock-names = "usb0_phy", ++ "usb1_phy", ++ "usb2_phy", ++ "usb3_phy", ++ "pmu2_clk"; ++ resets = <&ccu RST_USB_PHY0>, ++ <&ccu RST_USB_PHY1>, ++ <&ccu RST_USB_PHY2>, ++ <&ccu RST_USB_PHY3>; ++ reset-names = "usb0_reset", ++ "usb1_reset", ++ "usb2_reset", ++ "usb3_reset"; ++ status = "disabled"; ++ #phy-cells = <1>; ++ }; ++ ++ ehci0: usb@5101000 { ++ compatible = "allwinner,sun50i-h616-ehci", ++ "generic-ehci"; ++ reg = <0x05101000 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_OHCI0>, ++ <&ccu CLK_BUS_EHCI0>, ++ <&ccu CLK_USB_OHCI0>; ++ resets = <&ccu RST_BUS_OHCI0>, ++ <&ccu RST_BUS_EHCI0>; ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ status = "disabled"; ++ }; ++ ++ ohci0: usb@5101400 { ++ compatible = "allwinner,sun50i-h616-ohci", ++ "generic-ohci"; ++ reg = <0x05101400 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_OHCI0>, ++ <&ccu CLK_USB_OHCI0>; ++ resets = <&ccu RST_BUS_OHCI0>; ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ status = "disabled"; ++ }; ++ ++ ehci1: usb@5200000 { ++ compatible = "allwinner,sun50i-h616-ehci", ++ "generic-ehci"; ++ reg = <0x05200000 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_OHCI1>, ++ <&ccu CLK_BUS_EHCI1>, ++ <&ccu CLK_USB_OHCI1>; ++ resets = <&ccu RST_BUS_OHCI1>, ++ <&ccu RST_BUS_EHCI1>; ++ phys = <&usbphy 1>; ++ phy-names = "usb"; ++ status = "disabled"; ++ }; ++ ++ ohci1: usb@5200400 { ++ compatible = "allwinner,sun50i-h616-ohci", ++ "generic-ohci"; ++ reg = <0x05200400 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_OHCI1>, ++ <&ccu CLK_USB_OHCI1>; ++ resets = <&ccu RST_BUS_OHCI1>; ++ phys = <&usbphy 1>; ++ phy-names = "usb"; ++ status = "disabled"; ++ }; ++ ++ ehci2: usb@5310000 { ++ compatible = "allwinner,sun50i-h616-ehci", ++ "generic-ehci"; ++ reg = <0x05310000 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_OHCI2>, ++ <&ccu CLK_BUS_EHCI2>, ++ <&ccu CLK_USB_OHCI2>; ++ resets = <&ccu RST_BUS_OHCI2>, ++ <&ccu RST_BUS_EHCI2>; ++ phys = <&usbphy 2>; ++ phy-names = "usb"; ++ status = "disabled"; ++ }; ++ ++ ohci2: usb@5310400 { ++ compatible = "allwinner,sun50i-h616-ohci", ++ "generic-ohci"; ++ reg = <0x05310400 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_OHCI2>, ++ <&ccu CLK_USB_OHCI2>; ++ resets = <&ccu RST_BUS_OHCI2>; ++ phys = <&usbphy 2>; ++ phy-names = "usb"; ++ status = "disabled"; ++ }; ++ ++ ehci3: usb@5311000 { ++ compatible = "allwinner,sun50i-h616-ehci", ++ "generic-ehci"; ++ reg = <0x05311000 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_OHCI3>, ++ <&ccu CLK_BUS_EHCI3>, ++ <&ccu CLK_USB_OHCI3>; ++ resets = <&ccu RST_BUS_OHCI3>, ++ <&ccu RST_BUS_EHCI3>; ++ phys = <&usbphy 3>; ++ phy-names = "usb"; ++ status = "disabled"; ++ }; ++ ++ ohci3: usb@5311400 { ++ compatible = "allwinner,sun50i-h616-ohci", ++ "generic-ohci"; ++ reg = <0x05311400 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_OHCI3>, ++ <&ccu CLK_USB_OHCI3>; ++ resets = <&ccu RST_BUS_OHCI3>; ++ phys = <&usbphy 3>; ++ phy-names = "usb"; ++ status = "disabled"; ++ }; ++ + rtc: rtc@7000000 { + compatible = "allwinner,sun50i-h616-rtc"; + reg = <0x07000000 0x400>; diff --git a/target/linux/sunxi/patches-6.6/004-v6.2-arm64-dts-allwinner-h616-OrangePi-Zero-2-Add-USB-nodes.patch b/target/linux/sunxi/patches-6.6/004-v6.2-arm64-dts-allwinner-h616-OrangePi-Zero-2-Add-USB-nodes.patch new file mode 100644 index 0000000000..a544e482f3 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/004-v6.2-arm64-dts-allwinner-h616-OrangePi-Zero-2-Add-USB-nodes.patch @@ -0,0 +1,81 @@ +From db5f028309ede13767e2ba356c1975ac37a4fd6c Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Mon, 31 Oct 2022 11:13:57 +0000 +Subject: [PATCH] arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes + +The OrangePi Zero 2 has one USB-A host port, VBUS is provided by +a GPIO controlled regulator. +The USB-C port is meant to power the board, but is also connected to +the USB 0 port, which we configure as an MUSB peripheral. + +Signed-off-by: Andre Przywara +Reviewed-by: Jernej Skrabec +Link: https://lore.kernel.org/r/20221031111358.3387297-7-andre.przywara@arm.com +Signed-off-by: Jernej Skrabec +--- + .../allwinner/sun50i-h616-orangepi-zero2.dts | 41 +++++++++++++++++++ + 1 file changed, 41 insertions(+) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts +@@ -49,8 +49,24 @@ + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; ++ ++ reg_usb1_vbus: regulator-usb1-vbus { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb1-vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <®_vcc5v>; ++ enable-active-high; ++ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ ++ }; ++}; ++ ++&ehci1 { ++ status = "okay"; + }; + ++/* USB 2 & 3 are on headers only. */ ++ + &emac0 { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; +@@ -76,6 +92,10 @@ + status = "okay"; + }; + ++&ohci1 { ++ status = "okay"; ++}; ++ + &r_rsb { + status = "okay"; + +@@ -211,3 +231,24 @@ + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; + }; ++ ++&usbotg { ++ /* ++ * PHY0 pins are connected to a USB-C socket, but a role switch ++ * is not implemented: both CC pins are pulled to GND. ++ * The VBUS pins power the device, so a fixed peripheral mode ++ * is the best choice. ++ * The board can be powered via GPIOs, in this case port0 *can* ++ * act as a host (with a cable/adapter ignoring CC), as VBUS is ++ * then provided by the GPIOs. Any user of this setup would ++ * need to adjust the DT accordingly: dr_mode set to "host", ++ * enabling OHCI0 and EHCI0. ++ */ ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ status = "okay"; ++}; diff --git a/target/linux/sunxi/patches-6.6/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch b/target/linux/sunxi/patches-6.6/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch new file mode 100644 index 0000000000..0747e6a8e0 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch @@ -0,0 +1,305 @@ +From 322bf103204b8f786547acbeed85569254e7088f Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Fri, 4 Aug 2023 18:08:54 +0100 +Subject: [PATCH] arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT + +The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some +DT nodes with the Zero 2, but comes with a different PMIC. + +Move the common parts (except the PMIC) into a new shared file, and +include that from the existing board .dts file. + +No functional change, the generated DTB is the same, except for some +phandle numbering differences. + +Signed-off-by: Andre Przywara +Acked-by: Jernej Skrabec +Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com +Signed-off-by: Jernej Skrabec +--- + .../allwinner/sun50i-h616-orangepi-zero.dtsi | 134 ++++++++++++++++++ + .../allwinner/sun50i-h616-orangepi-zero2.dts | 119 +--------------- + 2 files changed, 135 insertions(+), 118 deletions(-) + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi + +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi +@@ -0,0 +1,134 @@ ++// SPDX-License-Identifier: (GPL-2.0+ or MIT) ++/* ++ * Copyright (C) 2020 Arm Ltd. ++ * ++ * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3. ++ * Excludes PMIC nodes and properties, since they are different between the two. ++ */ ++ ++#include "sun50i-h616.dtsi" ++ ++#include ++#include ++#include ++ ++/ { ++ aliases { ++ ethernet0 = &emac0; ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led-0 { ++ function = LED_FUNCTION_POWER; ++ color = ; ++ gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ ++ default-state = "on"; ++ }; ++ ++ led-1 { ++ function = LED_FUNCTION_STATUS; ++ color = ; ++ gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ ++ }; ++ }; ++ ++ reg_vcc5v: vcc5v { ++ /* board wide 5V supply directly from the USB-C socket */ ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-5v"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ reg_usb1_vbus: regulator-usb1-vbus { ++ compatible = "regulator-fixed"; ++ regulator-name = "usb1-vbus"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <®_vcc5v>; ++ enable-active-high; ++ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ ++ }; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++/* USB 2 & 3 are on headers only. */ ++ ++&emac0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ext_rgmii_pins>; ++ phy-mode = "rgmii"; ++ phy-handle = <&ext_rgmii_phy>; ++ allwinner,rx-delay-ps = <3100>; ++ allwinner,tx-delay-ps = <700>; ++ status = "okay"; ++}; ++ ++&mdio0 { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ }; ++}; ++ ++&mmc0 { ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; ++ ++ flash@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <40000000>; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_ph_pins>; ++ status = "okay"; ++}; ++ ++&usbotg { ++ /* ++ * PHY0 pins are connected to a USB-C socket, but a role switch ++ * is not implemented: both CC pins are pulled to GND. ++ * The VBUS pins power the device, so a fixed peripheral mode ++ * is the best choice. ++ * The board can be powered via GPIOs, in this case port0 *can* ++ * act as a host (with a cable/adapter ignoring CC), as VBUS is ++ * then provided by the GPIOs. Any user of this setup would ++ * need to adjust the DT accordingly: dr_mode set to "host", ++ * enabling OHCI0 and EHCI0. ++ */ ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ status = "okay"; ++}; +--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts +@@ -5,95 +5,19 @@ + + /dts-v1/; + +-#include "sun50i-h616.dtsi" +- +-#include +-#include +-#include ++#include "sun50i-h616-orangepi-zero.dtsi" + + / { + model = "OrangePi Zero2"; + compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; +- +- aliases { +- ethernet0 = &emac0; +- serial0 = &uart0; +- }; +- +- chosen { +- stdout-path = "serial0:115200n8"; +- }; +- +- leds { +- compatible = "gpio-leds"; +- +- led-0 { +- function = LED_FUNCTION_POWER; +- color = ; +- gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ +- default-state = "on"; +- }; +- +- led-1 { +- function = LED_FUNCTION_STATUS; +- color = ; +- gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ +- }; +- }; +- +- reg_vcc5v: vcc5v { +- /* board wide 5V supply directly from the USB-C socket */ +- compatible = "regulator-fixed"; +- regulator-name = "vcc-5v"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- regulator-always-on; +- }; +- +- reg_usb1_vbus: regulator-usb1-vbus { +- compatible = "regulator-fixed"; +- regulator-name = "usb1-vbus"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- vin-supply = <®_vcc5v>; +- enable-active-high; +- gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ +- }; +-}; +- +-&ehci1 { +- status = "okay"; + }; + +-/* USB 2 & 3 are on headers only. */ +- + &emac0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&ext_rgmii_pins>; +- phy-mode = "rgmii"; +- phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dcdce>; +- allwinner,rx-delay-ps = <3100>; +- allwinner,tx-delay-ps = <700>; +- status = "okay"; +-}; +- +-&mdio0 { +- ext_rgmii_phy: ethernet-phy@1 { +- compatible = "ethernet-phy-ieee802.3-c22"; +- reg = <1>; +- }; + }; + + &mmc0 { + vmmc-supply = <®_dcdce>; +- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ +- bus-width = <4>; +- status = "okay"; +-}; +- +-&ohci1 { +- status = "okay"; + }; + + &r_rsb { +@@ -211,44 +135,3 @@ + vcc-ph-supply = <®_aldo1>; + vcc-pi-supply = <®_aldo1>; + }; +- +-&spi0 { +- status = "okay"; +- pinctrl-names = "default"; +- pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; +- +- flash@0 { +- #address-cells = <1>; +- #size-cells = <1>; +- compatible = "jedec,spi-nor"; +- reg = <0>; +- spi-max-frequency = <40000000>; +- }; +-}; +- +-&uart0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart0_ph_pins>; +- status = "okay"; +-}; +- +-&usbotg { +- /* +- * PHY0 pins are connected to a USB-C socket, but a role switch +- * is not implemented: both CC pins are pulled to GND. +- * The VBUS pins power the device, so a fixed peripheral mode +- * is the best choice. +- * The board can be powered via GPIOs, in this case port0 *can* +- * act as a host (with a cable/adapter ignoring CC), as VBUS is +- * then provided by the GPIOs. Any user of this setup would +- * need to adjust the DT accordingly: dr_mode set to "host", +- * enabling OHCI0 and EHCI0. +- */ +- dr_mode = "peripheral"; +- status = "okay"; +-}; +- +-&usbphy { +- usb1_vbus-supply = <®_usb1_vbus>; +- status = "okay"; +-}; diff --git a/target/linux/sunxi/patches-6.6/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch b/target/linux/sunxi/patches-6.6/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch new file mode 100644 index 0000000000..4081a82d52 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch @@ -0,0 +1,140 @@ +From f1b3ddb3ecc2eec1f912383e01156c226daacfab Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Fri, 4 Aug 2023 18:08:56 +0100 +Subject: [PATCH] arm64: dts: allwinner: h616: Add OrangePi Zero 3 board + support + +The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC, +which seems to be just an H616 with more L2 cache. The board itself is a +slightly updated version of the Orange Pi Zero 2. It features: +- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU +- 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2) +- AXP313a PMIC (more capable AXP305 on the Zero2) +- Raspberry-Pi-1 compatible GPIO header +- extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports +- 1 USB 2.0 host port +- 1 USB 2.0 type C port (power supply + OTG) +- MicroSD slot +- on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2) +- 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2) +- micro-HDMI port +- (yet) unsupported Allwinner WiFi/BT chip + +Add the devicetree file describing the currently supported features, +namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at +the moment, though the basic functionality works. + +Signed-off-by: Andre Przywara +Reviewed-by: Jernej Skrabec +Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.com +Signed-off-by: Jernej Skrabec +--- + arch/arm64/boot/dts/allwinner/Makefile | 1 + + .../allwinner/sun50i-h618-orangepi-zero3.dts | 94 +++++++++++++++++++ + 2 files changed, 95 insertions(+) + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts + +--- a/arch/arm64/boot/dts/allwinner/Makefile ++++ b/arch/arm64/boot/dts/allwinner/Makefile +@@ -40,3 +40,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-ta + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb ++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts +@@ -0,0 +1,94 @@ ++// SPDX-License-Identifier: (GPL-2.0+ or MIT) ++/* ++ * Copyright (C) 2023 Arm Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "sun50i-h616-orangepi-zero.dtsi" ++ ++/ { ++ model = "OrangePi Zero3"; ++ compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618"; ++}; ++ ++&emac0 { ++ phy-supply = <®_dldo1>; ++}; ++ ++&ext_rgmii_phy { ++ motorcomm,clk-out-frequency-hz = <125000000>; ++}; ++ ++&mmc0 { ++ /* ++ * The schematic shows the card detect pin wired up to PF6, via an ++ * inverter, but it just doesn't work. ++ */ ++ broken-cd; ++ vmmc-supply = <®_dldo1>; ++}; ++ ++&r_i2c { ++ status = "okay"; ++ ++ axp313: pmic@36 { ++ compatible = "x-powers,axp313a"; ++ reg = <0x36>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ interrupt-parent = <&pio>; ++ interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */ ++ ++ vin1-supply = <®_vcc5v>; ++ vin2-supply = <®_vcc5v>; ++ vin3-supply = <®_vcc5v>; ++ ++ regulators { ++ /* Supplies VCC-PLL, so needs to be always on. */ ++ reg_aldo1: aldo1 { ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcc1v8"; ++ }; ++ ++ /* Supplies VCC-IO, so needs to be always on. */ ++ reg_dldo1: dldo1 { ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc3v3"; ++ }; ++ ++ reg_dcdc1: dcdc1 { ++ regulator-always-on; ++ regulator-min-microvolt = <810000>; ++ regulator-max-microvolt = <990000>; ++ regulator-name = "vdd-gpu-sys"; ++ }; ++ ++ reg_dcdc2: dcdc2 { ++ regulator-always-on; ++ regulator-min-microvolt = <810000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-cpu"; ++ }; ++ ++ reg_dcdc3: dcdc3 { ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-dram"; ++ }; ++ }; ++ }; ++}; ++ ++&pio { ++ vcc-pc-supply = <®_dldo1>; ++ vcc-pf-supply = <®_dldo1>; ++ vcc-pg-supply = <®_aldo1>; ++ vcc-ph-supply = <®_dldo1>; ++ vcc-pi-supply = <®_dldo1>; ++}; diff --git a/target/linux/sunxi/patches-6.6/007-v6.7-arm64-dts-allwinner-h616-update-emac-for-Orange-Pi.patch b/target/linux/sunxi/patches-6.6/007-v6.7-arm64-dts-allwinner-h616-update-emac-for-Orange-Pi.patch new file mode 100644 index 0000000000..a492eed551 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/007-v6.7-arm64-dts-allwinner-h616-update-emac-for-Orange-Pi.patch @@ -0,0 +1,57 @@ +From b9622937d95809ef89904583191571a9fa326402 Mon Sep 17 00:00:00 2001 +From: Chukun Pan +Date: Sun, 29 Oct 2023 15:40:09 +0800 +Subject: [PATCH] arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3 + +The current emac setting is not suitable for Orange Pi Zero 3, +move it back to Orange Pi Zero 2 DT. Also update phy mode and +delay values for emac on Orange Pi Zero 3. +With these changes, Ethernet now looks stable. + +Fixes: 322bf103204b ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT") +Signed-off-by: Chukun Pan +Reviewed-by: Jernej Skrabec +Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn +Signed-off-by: Jernej Skrabec +--- + arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 3 --- + arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 3 +++ + arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 2 ++ + 3 files changed, 5 insertions(+), 3 deletions(-) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi +@@ -68,10 +68,7 @@ + &emac0 { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; +- phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; +- allwinner,rx-delay-ps = <3100>; +- allwinner,tx-delay-ps = <700>; + status = "okay"; + }; + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts +@@ -13,6 +13,9 @@ + }; + + &emac0 { ++ allwinner,rx-delay-ps = <3100>; ++ allwinner,tx-delay-ps = <700>; ++ phy-mode = "rgmii"; + phy-supply = <®_dcdce>; + }; + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts +@@ -13,6 +13,8 @@ + }; + + &emac0 { ++ allwinner,tx-delay-ps = <700>; ++ phy-mode = "rgmii-rxid"; + phy-supply = <®_dldo1>; + }; + diff --git a/target/linux/sunxi/patches-6.6/008-v6.7-arm64-dts-allwinner-h616-Add-SID-controller-node.patch b/target/linux/sunxi/patches-6.6/008-v6.7-arm64-dts-allwinner-h616-Add-SID-controller-node.patch new file mode 100644 index 0000000000..ce8add18ab --- /dev/null +++ b/target/linux/sunxi/patches-6.6/008-v6.7-arm64-dts-allwinner-h616-Add-SID-controller-node.patch @@ -0,0 +1,31 @@ +From 951992797378a2177946400438f4d23c9fceae5b Mon Sep 17 00:00:00 2001 +From: Martin Botka +Date: Tue, 12 Sep 2023 14:25:13 +0200 +Subject: [PATCH] arm64: dts: allwinner: h616: Add SID controller node + +Add node for the H616 SID controller + +Signed-off-by: Martin Botka +Acked-by: Jernej Skrabec +Link: https://lore.kernel.org/r/20230912-sid-h616-v3-2-ee18e1c5bbb5@somainline.org +Signed-off-by: Jernej Skrabec +--- + arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +@@ -133,6 +133,13 @@ + #reset-cells = <1>; + }; + ++ sid: efuse@3006000 { ++ compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid"; ++ reg = <0x03006000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ }; ++ + watchdog: watchdog@30090a0 { + compatible = "allwinner,sun50i-h616-wdt", + "allwinner,sun6i-a31-wdt"; diff --git a/target/linux/sunxi/patches-6.6/009-v6.9-soc-sunxi-sram-export-register-0-for-THS-on-H616.patch b/target/linux/sunxi/patches-6.6/009-v6.9-soc-sunxi-sram-export-register-0-for-THS-on-H616.patch new file mode 100644 index 0000000000..3453e2aa53 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/009-v6.9-soc-sunxi-sram-export-register-0-for-THS-on-H616.patch @@ -0,0 +1,98 @@ +From 898d96c5464b69af44f6407c5de81ebc349d574b Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Mon, 19 Feb 2024 15:36:33 +0000 +Subject: [PATCH] soc: sunxi: sram: export register 0 for THS on H616 + +The Allwinner H616 SoC contains a mysterious bit at register offset 0x0 +in the SRAM control block. If bit 16 is set (the reset value), the +temperature readings of the THS are way off, leading to reports about +200C, at normal ambient temperatures. Clearing this bits brings the +reported values down to the expected values. +The BSP code clears this bit in firmware (U-Boot), and has an explicit +comment about this, but offers no real explanation. + +Experiments in U-Boot show that register 0x0 has no effect on the SRAM C +visibility: all tested bit settings still allow full read and write +access by the CPU to the whole of SRAM C. Only bit 24 of the register at +offset 0x4 makes all of SRAM C inaccessible by the CPU. So modelling +the THS switch functionality as an SRAM region would not reflect reality. + +Since we should not rely on firmware settings, allow other code (the THS +driver) to access this register, by exporting it through the already +existing regmap. This mimics what we already do for the LDO control and +the EMAC register. + +To avoid concurrent accesses to the same register at the same time, by +the SRAM switch code and the regmap code, use the same lock to protect +the access. The regmap subsystem allows to use an existing lock, so we +just need to hook in there. + +Signed-off-by: Andre Przywara +Reviewed-by: Jernej Skrabec +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20240219153639.179814-2-andre.przywara@arm.com +--- + drivers/soc/sunxi/sunxi_sram.c | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +--- a/drivers/soc/sunxi/sunxi_sram.c ++++ b/drivers/soc/sunxi/sunxi_sram.c +@@ -284,6 +284,7 @@ EXPORT_SYMBOL(sunxi_sram_release); + struct sunxi_sramc_variant { + int num_emac_clocks; + bool has_ldo_ctrl; ++ bool has_ths_offset; + }; + + static const struct sunxi_sramc_variant sun4i_a10_sramc_variant = { +@@ -305,8 +306,10 @@ static const struct sunxi_sramc_variant + + static const struct sunxi_sramc_variant sun50i_h616_sramc_variant = { + .num_emac_clocks = 2, ++ .has_ths_offset = true, + }; + ++#define SUNXI_SRAM_THS_OFFSET_REG 0x0 + #define SUNXI_SRAM_EMAC_CLOCK_REG 0x30 + #define SUNXI_SYS_LDO_CTRL_REG 0x150 + +@@ -315,6 +318,8 @@ static bool sunxi_sram_regmap_accessible + { + const struct sunxi_sramc_variant *variant = dev_get_drvdata(dev); + ++ if (reg == SUNXI_SRAM_THS_OFFSET_REG && variant->has_ths_offset) ++ return true; + if (reg >= SUNXI_SRAM_EMAC_CLOCK_REG && + reg < SUNXI_SRAM_EMAC_CLOCK_REG + variant->num_emac_clocks * 4) + return true; +@@ -324,6 +329,20 @@ static bool sunxi_sram_regmap_accessible + return false; + } + ++static void sunxi_sram_lock(void *_lock) ++{ ++ spinlock_t *lock = _lock; ++ ++ spin_lock(lock); ++} ++ ++static void sunxi_sram_unlock(void *_lock) ++{ ++ spinlock_t *lock = _lock; ++ ++ spin_unlock(lock); ++} ++ + static struct regmap_config sunxi_sram_regmap_config = { + .reg_bits = 32, + .val_bits = 32, +@@ -333,6 +352,9 @@ static struct regmap_config sunxi_sram_r + /* other devices have no business accessing other registers */ + .readable_reg = sunxi_sram_regmap_accessible_reg, + .writeable_reg = sunxi_sram_regmap_accessible_reg, ++ .lock = sunxi_sram_lock, ++ .unlock = sunxi_sram_unlock, ++ .lock_arg = &sram_lock, + }; + + static int __init sunxi_sram_probe(struct platform_device *pdev) diff --git a/target/linux/sunxi/patches-6.6/010-v6.8-thermal-drivers-sun8i-Add-D1-T113s-THS-controller-support.patch b/target/linux/sunxi/patches-6.6/010-v6.8-thermal-drivers-sun8i-Add-D1-T113s-THS-controller-support.patch new file mode 100644 index 0000000000..8b19989118 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/010-v6.8-thermal-drivers-sun8i-Add-D1-T113s-THS-controller-support.patch @@ -0,0 +1,47 @@ +From ebbf19e36d021f253425344b4d4b987f3b7d9be5 Mon Sep 17 00:00:00 2001 +From: Maxim Kiselev +Date: Mon, 18 Dec 2023 00:06:23 +0300 +Subject: [PATCH] thermal/drivers/sun8i: Add D1/T113s THS controller support + +This patch adds a thermal sensor controller support for the D1/T113s, +which is similar to the one on H6, but with only one sensor and +different scale and offset values. + +Signed-off-by: Maxim Kiselev +Acked-by: Jernej Skrabec +Reviewed-by: Andre Przywara +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20231217210629.131486-3-bigunclemax@gmail.com +--- + drivers/thermal/sun8i_thermal.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/thermal/sun8i_thermal.c ++++ b/drivers/thermal/sun8i_thermal.c +@@ -610,6 +610,18 @@ static const struct ths_thermal_chip sun + .calc_temp = sun8i_ths_calc_temp, + }; + ++static const struct ths_thermal_chip sun20i_d1_ths = { ++ .sensor_num = 1, ++ .has_bus_clk_reset = true, ++ .offset = 188552, ++ .scale = 673, ++ .temp_data_base = SUN50I_H6_THS_TEMP_DATA, ++ .calibrate = sun50i_h6_ths_calibrate, ++ .init = sun50i_h6_thermal_init, ++ .irq_ack = sun50i_h6_irq_ack, ++ .calc_temp = sun8i_ths_calc_temp, ++}; ++ + static const struct of_device_id of_ths_match[] = { + { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths }, + { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths }, +@@ -618,6 +630,7 @@ static const struct of_device_id of_ths_ + { .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths }, + { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths }, + { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, ++ { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths }, + { /* sentinel */ }, + }; + MODULE_DEVICE_TABLE(of, of_ths_match); diff --git a/target/linux/sunxi/patches-6.6/011-v6.9-thermal-drivers-sun8i-Explain-unknown-H6-register-value.patch b/target/linux/sunxi/patches-6.6/011-v6.9-thermal-drivers-sun8i-Explain-unknown-H6-register-value.patch new file mode 100644 index 0000000000..b8138a3870 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/011-v6.9-thermal-drivers-sun8i-Explain-unknown-H6-register-value.patch @@ -0,0 +1,79 @@ +From 14f118aa50fe7c7c7330f56d007ecacca487cea8 Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Mon, 19 Feb 2024 15:36:35 +0000 +Subject: [PATCH] thermal/drivers/sun8i: Explain unknown H6 register value + +So far we were ORing in some "unknown" value into the THS control +register on the Allwinner H6. This part of the register is not explained +in the H6 manual, but the H616 manual details those bits, and on closer +inspection the THS IP blocks in both SoCs seem very close: +- The BSP code for both SoCs writes the same values into THS_CTRL. +- The reset values of at least the first three registers are the same. + +Replace the "unknown" value with its proper meaning: "acquire time", +most probably the sample part of the sample & hold circuit of the ADC, +according to its explanation in the H616 manual. + +No functional change, just a macro rename and adjustment. + +Signed-off-by: Andre Przywara +Reviewed-by: Jernej Skrabec +Acked-by: Vasily Khoruzhick +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20240219153639.179814-4-andre.przywara@arm.com +--- + drivers/thermal/sun8i_thermal.c | 29 ++++++++++++++++------------- + 1 file changed, 16 insertions(+), 13 deletions(-) + +--- a/drivers/thermal/sun8i_thermal.c ++++ b/drivers/thermal/sun8i_thermal.c +@@ -50,7 +50,8 @@ + #define SUN8I_THS_CTRL2_T_ACQ1(x) ((GENMASK(15, 0) & (x)) << 16) + #define SUN8I_THS_DATA_IRQ_STS(x) BIT(x + 8) + +-#define SUN50I_THS_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16) ++#define SUN50I_THS_CTRL0_T_ACQ(x) (GENMASK(15, 0) & ((x) - 1)) ++#define SUN50I_THS_CTRL0_T_SAMPLE_PER(x) ((GENMASK(15, 0) & ((x) - 1)) << 16) + #define SUN50I_THS_FILTER_EN BIT(2) + #define SUN50I_THS_FILTER_TYPE(x) (GENMASK(1, 0) & (x)) + #define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12) +@@ -410,25 +411,27 @@ static int sun8i_h3_thermal_init(struct + return 0; + } + +-/* +- * Without this undocumented value, the returned temperatures would +- * be higher than real ones by about 20C. +- */ +-#define SUN50I_H6_CTRL0_UNK 0x0000002f +- + static int sun50i_h6_thermal_init(struct ths_device *tmdev) + { + int val; + + /* +- * T_acq = 20us +- * clkin = 24MHz +- * +- * x = T_acq * clkin - 1 +- * = 479 ++ * The manual recommends an overall sample frequency of 50 KHz (20us, ++ * 480 cycles at 24 MHz), which provides plenty of time for both the ++ * acquisition time (>24 cycles) and the actual conversion time ++ * (>14 cycles). ++ * The lower half of the CTRL register holds the "acquire time", in ++ * clock cycles, which the manual recommends to be 2us: ++ * 24MHz * 2us = 48 cycles. ++ * The high half of THS_CTRL encodes the sample frequency, in clock ++ * cycles: 24MHz * 20us = 480 cycles. ++ * This is explained in the H616 manual, but apparently wrongly ++ * described in the H6 manual, although the BSP code does the same ++ * for both SoCs. + */ + regmap_write(tmdev->regmap, SUN50I_THS_CTRL0, +- SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479)); ++ SUN50I_THS_CTRL0_T_ACQ(48) | ++ SUN50I_THS_CTRL0_T_SAMPLE_PER(480)); + /* average over 4 samples */ + regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC, + SUN50I_THS_FILTER_EN | diff --git a/target/linux/sunxi/patches-6.6/012-v6.9-thermal-drivers-sun8i-Extend-H6-calibration-to-support-4.patch b/target/linux/sunxi/patches-6.6/012-v6.9-thermal-drivers-sun8i-Extend-H6-calibration-to-support-4.patch new file mode 100644 index 0000000000..3d01a507fa --- /dev/null +++ b/target/linux/sunxi/patches-6.6/012-v6.9-thermal-drivers-sun8i-Extend-H6-calibration-to-support-4.patch @@ -0,0 +1,74 @@ +From 6c04a419a4c5fb18edefc44dd676fb95c7f6c55d Mon Sep 17 00:00:00 2001 +From: Maksim Kiselev +Date: Mon, 19 Feb 2024 15:36:36 +0000 +Subject: [PATCH] thermal/drivers/sun8i: Extend H6 calibration to support 4 + sensors + +The H616 SoC resembles the H6 thermal sensor controller, with a few +changes like four sensors. + +Extend sun50i_h6_ths_calibrate() function to support calibration of +these sensors. + +Co-developed-by: Martin Botka +Signed-off-by: Martin Botka +Signed-off-by: Maksim Kiselev +Reviewed-by: Andre Przywara +Signed-off-by: Andre Przywara +Reviewed-by: Jernej Skrabec +Acked-by: Vasily Khoruzhick +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20240219153639.179814-5-andre.przywara@arm.com +--- + drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++-------- + 1 file changed, 20 insertions(+), 8 deletions(-) + +--- a/drivers/thermal/sun8i_thermal.c ++++ b/drivers/thermal/sun8i_thermal.c +@@ -224,16 +224,21 @@ static int sun50i_h6_ths_calibrate(struc + struct device *dev = tmdev->dev; + int i, ft_temp; + +- if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) ++ if (!caldata[0]) + return -EINVAL; + + /* + * efuse layout: + * +- * 0 11 16 32 +- * +-------+-------+-------+ +- * |temp| |sensor0|sensor1| +- * +-------+-------+-------+ ++ * 0 11 16 27 32 43 48 57 ++ * +----------+-----------+-----------+-----------+ ++ * | temp | |sensor0| |sensor1| |sensor2| | ++ * +----------+-----------+-----------+-----------+ ++ * ^ ^ ^ ++ * | | | ++ * | | sensor3[11:8] ++ * | sensor3[7:4] ++ * sensor3[3:0] + * + * The calibration data on the H6 is the ambient temperature and + * sensor values that are filled during the factory test stage. +@@ -246,9 +251,16 @@ static int sun50i_h6_ths_calibrate(struc + ft_temp = (caldata[0] & FT_TEMP_MASK) * 100; + + for (i = 0; i < tmdev->chip->sensor_num; i++) { +- int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; +- int cdata, offset; +- int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); ++ int sensor_reg, sensor_temp, cdata, offset; ++ ++ if (i == 3) ++ sensor_reg = (caldata[1] >> 12) ++ | ((caldata[2] >> 12) << 4) ++ | ((caldata[3] >> 12) << 8); ++ else ++ sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; ++ ++ sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); + + /* + * Calibration data is CALIBRATE_DEFAULT - (calculated diff --git a/target/linux/sunxi/patches-6.6/013-v6.9-thermal-drivers-sun8i-Add-SRAM-register-access-code.patch b/target/linux/sunxi/patches-6.6/013-v6.9-thermal-drivers-sun8i-Add-SRAM-register-access-code.patch new file mode 100644 index 0000000000..6db1e32cfb --- /dev/null +++ b/target/linux/sunxi/patches-6.6/013-v6.9-thermal-drivers-sun8i-Add-SRAM-register-access-code.patch @@ -0,0 +1,126 @@ +From f8b54d1120b81ed57bed96cc8e814ba08886d1e5 Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Mon, 19 Feb 2024 15:36:37 +0000 +Subject: [PATCH] thermal/drivers/sun8i: Add SRAM register access code + +The Allwinner H616 SoC needs to clear a bit in one register in the SRAM +controller, to report reasonable temperature values. On reset, bit 16 in +register 0x3000000 is set, which leads to the driver reporting +temperatures around 200C. Clearing this bit brings the values down to the +expected range. The BSP code does a one-time write in U-Boot, with a +comment just mentioning the effect on the THS, but offering no further +explanation. + +To not rely on firmware to set things up for us, add code that queries +the SRAM controller device via a DT phandle link, then clear just this +single bit. + +Signed-off-by: Andre Przywara +Acked-by: Vasily Khoruzhick +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20240219153639.179814-6-andre.przywara@arm.com +--- + drivers/thermal/sun8i_thermal.c | 51 +++++++++++++++++++++++++++++++++ + 1 file changed, 51 insertions(+) + +--- a/drivers/thermal/sun8i_thermal.c ++++ b/drivers/thermal/sun8i_thermal.c +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -68,6 +69,7 @@ struct tsensor { + struct ths_thermal_chip { + bool has_mod_clk; + bool has_bus_clk_reset; ++ bool needs_sram; + int sensor_num; + int offset; + int scale; +@@ -85,12 +87,16 @@ struct ths_device { + const struct ths_thermal_chip *chip; + struct device *dev; + struct regmap *regmap; ++ struct regmap_field *sram_regmap_field; + struct reset_control *reset; + struct clk *bus_clk; + struct clk *mod_clk; + struct tsensor sensor[MAX_SENSOR_NUM]; + }; + ++/* The H616 needs to have a bit 16 in the SRAM control register cleared. */ ++static const struct reg_field sun8i_ths_sram_reg_field = REG_FIELD(0x0, 16, 16); ++ + /* Temp Unit: millidegree Celsius */ + static int sun8i_ths_calc_temp(struct ths_device *tmdev, + int id, int reg) +@@ -337,6 +343,34 @@ static void sun8i_ths_reset_control_asse + reset_control_assert(data); + } + ++static struct regmap *sun8i_ths_get_sram_regmap(struct device_node *node) ++{ ++ struct device_node *sram_node; ++ struct platform_device *sram_pdev; ++ struct regmap *regmap = NULL; ++ ++ sram_node = of_parse_phandle(node, "allwinner,sram", 0); ++ if (!sram_node) ++ return ERR_PTR(-ENODEV); ++ ++ sram_pdev = of_find_device_by_node(sram_node); ++ if (!sram_pdev) { ++ /* platform device might not be probed yet */ ++ regmap = ERR_PTR(-EPROBE_DEFER); ++ goto out_put_node; ++ } ++ ++ /* If no regmap is found then the other device driver is at fault */ ++ regmap = dev_get_regmap(&sram_pdev->dev, NULL); ++ if (!regmap) ++ regmap = ERR_PTR(-EINVAL); ++ ++ platform_device_put(sram_pdev); ++out_put_node: ++ of_node_put(sram_node); ++ return regmap; ++} ++ + static int sun8i_ths_resource_init(struct ths_device *tmdev) + { + struct device *dev = tmdev->dev; +@@ -381,6 +415,19 @@ static int sun8i_ths_resource_init(struc + if (ret) + return ret; + ++ if (tmdev->chip->needs_sram) { ++ struct regmap *regmap; ++ ++ regmap = sun8i_ths_get_sram_regmap(dev->of_node); ++ if (IS_ERR(regmap)) ++ return PTR_ERR(regmap); ++ tmdev->sram_regmap_field = devm_regmap_field_alloc(dev, ++ regmap, ++ sun8i_ths_sram_reg_field); ++ if (IS_ERR(tmdev->sram_regmap_field)) ++ return PTR_ERR(tmdev->sram_regmap_field); ++ } ++ + ret = sun8i_ths_calibrate(tmdev); + if (ret) + return ret; +@@ -427,6 +474,10 @@ static int sun50i_h6_thermal_init(struct + { + int val; + ++ /* The H616 needs to have a bit in the SRAM control register cleared. */ ++ if (tmdev->sram_regmap_field) ++ regmap_field_write(tmdev->sram_regmap_field, 0); ++ + /* + * The manual recommends an overall sample frequency of 50 KHz (20us, + * 480 cycles at 24 MHz), which provides plenty of time for both the diff --git a/target/linux/sunxi/patches-6.6/014-v6.9-thermal-drivers-sun8i-Add-support-for-H616-THS-controller.patch b/target/linux/sunxi/patches-6.6/014-v6.9-thermal-drivers-sun8i-Add-support-for-H616-THS-controller.patch new file mode 100644 index 0000000000..e743d344c6 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/014-v6.9-thermal-drivers-sun8i-Add-support-for-H616-THS-controller.patch @@ -0,0 +1,50 @@ +From e7dbfa19572a1440a2e67ef70f94ff204849a0a8 Mon Sep 17 00:00:00 2001 +From: Martin Botka +Date: Mon, 19 Feb 2024 15:36:38 +0000 +Subject: [PATCH] thermal/drivers/sun8i: Add support for H616 THS controller + +Add support for the thermal sensor found in H616 SoCs, is the same as +the H6 thermal sensor controller, but with four sensors. +Also the registers readings are wrong, unless a bit in the first SYS_CFG +register cleared, so set exercise the SRAM regmap to take care of that. + +Signed-off-by: Martin Botka +Signed-off-by: Andre Przywara +Acked-by: Vasily Khoruzhick +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20240219153639.179814-7-andre.przywara@arm.com +--- + drivers/thermal/sun8i_thermal.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/drivers/thermal/sun8i_thermal.c ++++ b/drivers/thermal/sun8i_thermal.c +@@ -688,6 +688,20 @@ static const struct ths_thermal_chip sun + .calc_temp = sun8i_ths_calc_temp, + }; + ++static const struct ths_thermal_chip sun50i_h616_ths = { ++ .sensor_num = 4, ++ .has_bus_clk_reset = true, ++ .needs_sram = true, ++ .ft_deviation = 8000, ++ .offset = 263655, ++ .scale = 810, ++ .temp_data_base = SUN50I_H6_THS_TEMP_DATA, ++ .calibrate = sun50i_h6_ths_calibrate, ++ .init = sun50i_h6_thermal_init, ++ .irq_ack = sun50i_h6_irq_ack, ++ .calc_temp = sun8i_ths_calc_temp, ++}; ++ + static const struct of_device_id of_ths_match[] = { + { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths }, + { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths }, +@@ -697,6 +711,7 @@ static const struct of_device_id of_ths_ + { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths }, + { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, + { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths }, ++ { .compatible = "allwinner,sun50i-h616-ths", .data = &sun50i_h616_ths }, + { /* sentinel */ }, + }; + MODULE_DEVICE_TABLE(of, of_ths_match); diff --git a/target/linux/sunxi/patches-6.6/015-v6.9-thermal-drivers-sun8i-Dont-fail-probe-due-to-zone-registra.patch b/target/linux/sunxi/patches-6.6/015-v6.9-thermal-drivers-sun8i-Dont-fail-probe-due-to-zone-registra.patch new file mode 100644 index 0000000000..384bf55084 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/015-v6.9-thermal-drivers-sun8i-Dont-fail-probe-due-to-zone-registra.patch @@ -0,0 +1,68 @@ +From 9ac53d5532cc4bb595bbee86ccba2172ccc336c3 Mon Sep 17 00:00:00 2001 +From: Mark Brown +Date: Tue, 23 Jan 2024 23:33:07 +0000 +Subject: [PATCH] thermal/drivers/sun8i: Don't fail probe due to zone + registration failure + +Currently the sun8i thermal driver will fail to probe if any of the +thermal zones it is registering fails to register with the thermal core. +Since we currently do not define any trip points for the GPU thermal +zones on at least A64 or H5 this means that we have no thermal support +on these platforms: + +[ 1.698703] thermal_sys: Failed to find 'trips' node +[ 1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1 + +even though the main CPU thermal zone on both SoCs is fully configured. +This does not seem ideal, while we may not be able to use all the zones +it seems better to have those zones which are usable be operational. +Instead just carry on registering zones if we get any non-deferral +error, allowing use of those zones which are usable. + +This means that we also need to update the interrupt handler to not +attempt to notify the core for events on zones which we have not +registered, I didn't see an ability to mask individual interrupts and +I would expect that interrupts would still be indicated in the ISR even +if they were masked. + +Reviewed-by: Vasily Khoruzhick +Acked-by: Jernej Skrabec +Signed-off-by: Mark Brown +Signed-off-by: Daniel Lezcano +Link: https://lore.kernel.org/r/20240123-thermal-sun8i-registration-v3-1-3e5771b1bbdd@kernel.org +--- + drivers/thermal/sun8i_thermal.c | 16 ++++++++++++++-- + 1 file changed, 14 insertions(+), 2 deletions(-) + +--- a/drivers/thermal/sun8i_thermal.c ++++ b/drivers/thermal/sun8i_thermal.c +@@ -197,6 +197,9 @@ static irqreturn_t sun8i_irq_thread(int + int i; + + for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) { ++ /* We allow some zones to not register. */ ++ if (IS_ERR(tmdev->sensor[i].tzd)) ++ continue; + thermal_zone_device_update(tmdev->sensor[i].tzd, + THERMAL_EVENT_UNSPECIFIED); + } +@@ -531,8 +534,17 @@ static int sun8i_ths_register(struct ths + i, + &tmdev->sensor[i], + &ths_ops); +- if (IS_ERR(tmdev->sensor[i].tzd)) +- return PTR_ERR(tmdev->sensor[i].tzd); ++ ++ /* ++ * If an individual zone fails to register for reasons ++ * other than probe deferral (eg, a bad DT) then carry ++ * on, other zones might register successfully. ++ */ ++ if (IS_ERR(tmdev->sensor[i].tzd)) { ++ if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER) ++ return PTR_ERR(tmdev->sensor[i].tzd); ++ continue; ++ } + + if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd)) + dev_warn(tmdev->dev, diff --git a/target/linux/sunxi/patches-6.6/016-v6.9-arm64-dts-allwinner-h616-Add-thermal-sensor-and-zones.patch b/target/linux/sunxi/patches-6.6/016-v6.9-arm64-dts-allwinner-h616-Add-thermal-sensor-and-zones.patch new file mode 100644 index 0000000000..cd6542bf14 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/016-v6.9-arm64-dts-allwinner-h616-Add-thermal-sensor-and-zones.patch @@ -0,0 +1,138 @@ +From f4318af40544b8e7ff5a6b667ede60e6cf808262 Mon Sep 17 00:00:00 2001 +From: Martin Botka +Date: Mon, 19 Feb 2024 15:36:39 +0000 +Subject: [PATCH] arm64: dts: allwinner: h616: Add thermal sensor and zones + +There are four thermal sensors: +- CPU +- GPU +- VE +- DRAM + +Add the thermal sensor configuration and the thermal zones. + +Signed-off-by: Martin Botka +Signed-off-by: Andre Przywara +Reviewed-by: Jernej Skrabec +Link: https://lore.kernel.org/r/20240219153639.179814-8-andre.przywara@arm.com +Signed-off-by: Jernej Skrabec +--- + .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++ + 1 file changed, 88 insertions(+) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +@@ -9,6 +9,7 @@ + #include + #include + #include ++#include + + / { + interrupt-parent = <&gic>; +@@ -138,6 +139,10 @@ + reg = <0x03006000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; ++ ++ ths_calibration: thermal-sensor-calibration@14 { ++ reg = <0x14 0x8>; ++ }; + }; + + watchdog: watchdog@30090a0 { +@@ -511,6 +516,19 @@ + }; + }; + ++ ths: thermal-sensor@5070400 { ++ compatible = "allwinner,sun50i-h616-ths"; ++ reg = <0x05070400 0x400>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_THS>; ++ clock-names = "bus"; ++ resets = <&ccu RST_BUS_THS>; ++ nvmem-cells = <&ths_calibration>; ++ nvmem-cell-names = "calibration"; ++ allwinner,sram = <&syscon>; ++ #thermal-sensor-cells = <1>; ++ }; ++ + usbotg: usb@5100000 { + compatible = "allwinner,sun50i-h616-musb", + "allwinner,sun8i-h3-musb"; +@@ -755,4 +773,74 @@ + #size-cells = <0>; + }; + }; ++ ++ thermal-zones { ++ cpu-thermal { ++ polling-delay-passive = <500>; ++ polling-delay = <1000>; ++ thermal-sensors = <&ths 2>; ++ sustainable-power = <1000>; ++ ++ trips { ++ cpu_threshold: cpu-trip-0 { ++ temperature = <60000>; ++ type = "passive"; ++ hysteresis = <0>; ++ }; ++ cpu_target: cpu-trip-1 { ++ temperature = <70000>; ++ type = "passive"; ++ hysteresis = <0>; ++ }; ++ cpu_critical: cpu-trip-2 { ++ temperature = <110000>; ++ type = "critical"; ++ hysteresis = <0>; ++ }; ++ }; ++ }; ++ ++ gpu-thermal { ++ polling-delay-passive = <500>; ++ polling-delay = <1000>; ++ thermal-sensors = <&ths 0>; ++ sustainable-power = <1100>; ++ ++ trips { ++ gpu_temp_critical: gpu-trip-0 { ++ temperature = <110000>; ++ type = "critical"; ++ hysteresis = <0>; ++ }; ++ }; ++ }; ++ ++ ve-thermal { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&ths 1>; ++ ++ trips { ++ ve_temp_critical: ve-trip-0 { ++ temperature = <110000>; ++ type = "critical"; ++ hysteresis = <0>; ++ }; ++ }; ++ }; ++ ++ ddr-thermal { ++ polling-delay-passive = <0>; ++ polling-delay = <0>; ++ thermal-sensors = <&ths 3>; ++ ++ trips { ++ ddr_temp_critical: ddr-trip-0 { ++ temperature = <110000>; ++ type = "critical"; ++ hysteresis = <0>; ++ }; ++ }; ++ }; ++ }; + }; diff --git a/target/linux/sunxi/patches-6.6/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch b/target/linux/sunxi/patches-6.6/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch new file mode 100644 index 0000000000..30c98aa737 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch @@ -0,0 +1,30 @@ +From a896bc1d79e3c00f0aacfe225499d811775616f3 Mon Sep 17 00:00:00 2001 +From: Chukun Pan +Date: Sun, 10 Oct 2021 21:50:17 +0800 +Subject: [PATCH] arm64: allwinner: add OF node for USB eth on NanoPi R1S H5 + +This adds the OF node for the USB3 ethernet adapter on the FriendlyARM +NanoPi R1S H5. Add the correct value for the RTL8153 LED configuration +register to match the blink behavior of the other port on the device. + +Signed-off-by: Chukun Pan +--- + arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts +@@ -116,6 +116,13 @@ + + &ehci1 { + status = "okay"; ++ ++ usb-eth@1 { ++ compatible = "realtek,rtl8153"; ++ reg = <1>; ++ ++ realtek,led-data = <0x78>; ++ }; + }; + + &ehci2 { diff --git a/target/linux/sunxi/patches-6.6/301-orangepi_pc2_usb_otg_to_host_key_power.patch b/target/linux/sunxi/patches-6.6/301-orangepi_pc2_usb_otg_to_host_key_power.patch new file mode 100644 index 0000000000..2c5ccd7d96 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/301-orangepi_pc2_usb_otg_to_host_key_power.patch @@ -0,0 +1,20 @@ +--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +@@ -59,7 +59,7 @@ + + key-sw4 { + label = "sw4"; +- linux,code = ; ++ linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; + }; +@@ -220,7 +220,7 @@ + }; + + &usb_otg { +- dr_mode = "otg"; ++ dr_mode = "host"; + status = "okay"; + }; + diff --git a/target/linux/sunxi/patches-6.6/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch b/target/linux/sunxi/patches-6.6/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch new file mode 100644 index 0000000000..a8dfcd9dbc --- /dev/null +++ b/target/linux/sunxi/patches-6.6/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch @@ -0,0 +1,46 @@ +From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001 +From: Oskari Lemmela +Date: Mon, 31 Dec 2018 07:44:49 +0200 +Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions. + +First 896kB to u-boot. Enough space for SPL, u-boot and ATF. +Next 128kB to u-boot environment and rest to firmware. + +Firmware partition is compatible FIT image dynamic splitting. + +Signed-off-by: Oskari Lemmela +--- + .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++ + 1 file changed, 22 insertions(+) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +@@ -58,6 +58,28 @@ + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x000000 0x0E0000>; ++ }; ++ ++ partition@e0000 { ++ label = "u-boot-env"; ++ reg = <0x0E0000 0x020000>; ++ }; ++ ++ partition@100000 { ++ compatible = "denx,fit"; ++ label = "firmware"; ++ reg = <0x100000 0xF00000>; ++ }; ++ }; + }; + }; + diff --git a/target/linux/sunxi/patches-6.6/410-sunxi-add-bananapi-p2-zero.patch b/target/linux/sunxi/patches-6.6/410-sunxi-add-bananapi-p2-zero.patch new file mode 100644 index 0000000000..5b8dd170c5 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/410-sunxi-add-bananapi-p2-zero.patch @@ -0,0 +1,292 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -1352,6 +1352,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a83t-cubietruck-plus.dtb \ + sun8i-a83t-tbs-a711.dtb \ + sun8i-h2-plus-bananapi-m2-zero.dtb \ ++ sun8i-h2-plus-bananapi-p2-zero.dtb \ + sun8i-h2-plus-libretech-all-h3-cc.dtb \ + sun8i-h2-plus-orangepi-r1.dtb \ + sun8i-h2-plus-orangepi-zero.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-p2-zero.dts +@@ -0,0 +1,279 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2023 Zoltan HERPAI ++ * ++ * Based on sun8i-h2-plus-bananapi-m2-zero.dts, which is: ++ * Copyright (C) 2017 Icenowy Zheng ++ */ ++ ++/dts-v1/; ++#include "sun8i-h3.dtsi" ++#include "sunxi-common-regulators.dtsi" ++ ++#include ++#include ++ ++/ { ++ model = "Banana Pi BPI-P2-Zero"; ++ compatible = "sinovoip,bpi-p2-zero", "allwinner,sun8i-h2-plus"; ++ ++ aliases { ++ serial0 = &uart0; ++ serial1 = &uart1; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ connector { ++ compatible = "hdmi-connector"; ++ type = "c"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pwr_led { ++ label = "bananapi-p2-zero:red:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ ++ default-state = "on"; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ ++ sw4 { ++ label = "power"; ++ linux,code = ; ++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ reg_vdd_cpux: vdd-cpux-regulator { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-cpux"; ++ regulator-type = "voltage"; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-ramp-delay = <50>; /* 4ms */ ++ ++ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ ++ enable-active-high; ++ gpios-states = <0x1>; ++ states = <1100000 0>, <1300000 1>; ++ }; ++ ++ reg_vcc_dram: vcc-dram { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-dram"; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-always-on; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ ++ vin-supply = <®_vcc5v0>; ++ }; ++ ++ reg_vcc1v2: vcc1v2 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc1v2"; ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-always-on; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ ++ vin-supply = <®_vcc5v0>; ++ }; ++ ++ poweroff { ++ compatible = "regulator-poweroff"; ++ cpu-supply = <®_vcc1v2>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ ++ clocks = <&rtc 1>; ++ clock-names = "ext_clock"; ++ }; ++}; ++ ++&cpu0 { ++ cpu-supply = <®_vdd_cpux>; ++}; ++ ++&de { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&emac { ++ phy-handle = <&int_mii_phy>; ++ phy-mode = "mii"; ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&hdmi { ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ ++&mmc0 { ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ /* ++ * On the production batch of this board the card detect GPIO is ++ * high active (card inserted), although on the early samples it's ++ * low active. ++ */ ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ ++ status = "okay"; ++}; ++ ++&mmc1 { ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&pio>; ++ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ ++ interrupt-names = "host-wake"; ++ }; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pa_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; ++ uart-has-rtscts; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <1500000>; ++ clocks = <&rtc 1>; ++ clock-names = "lpo"; ++ vbat-supply = <®_vcc3v3>; ++ vddio-supply = <®_vcc3v3>; ++ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ ++ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ ++ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++ }; ++ ++}; ++ ++&pio { ++ gpio-line-names = ++ /* PA */ ++ "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15", ++ "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29", ++ "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05", ++ "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16", ++ "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27", ++ "CON2-P40", "CON2-P38", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PB */ ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PC */ ++ "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24", ++ "CON2-P18", "", "", "CON2-P26", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PD */ ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "CSI-PWR-EN", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PE */ ++ "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07", ++ "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20", ++ "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12", ++ "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PF */ ++ "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", ++ "SDC0-D2", "SDC0-DET", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PG */ ++ "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1", ++ "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX", ++ "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP", ++ "BT-RST-N", "AP-WAKE-BT", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&r_pio { ++ gpio-line-names = ++ /* PL */ ++ "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36", ++ "VCC-IO-EN", "USB0-ID", "WL-PWR-EN", ++ "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&usb_otg { ++ dr_mode = "otg"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ ++ /* ++ * There're two micro-USB connectors, one is power-only and another is ++ * OTG. The Vbus of these two connectors are connected together, so ++ * the external USB device will be powered just by the power input ++ * from the power-only USB port. ++ */ ++ status = "okay"; ++}; diff --git a/target/linux/sunxi/patches-6.6/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch b/target/linux/sunxi/patches-6.6/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch new file mode 100644 index 0000000000..68ec333e37 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch @@ -0,0 +1,32 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Petr=20=C5=A0tetiar?= +Date: Thu, 26 Mar 2020 10:09:19 +0100 +Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add status LED aliases +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Petr Å tetiar + +--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +@@ -15,6 +15,10 @@ + aliases { + ethernet0 = &emac; + serial0 = &uart0; ++ led-boot = &led_user; ++ led-failsafe = &led_user; ++ led-running = &led_user; ++ led-upgrade = &led_user; + }; + + chosen { +@@ -35,7 +39,7 @@ + leds { + compatible = "gpio-leds"; + +- led-0 { ++ led_user: led-0 { + label = "a64-olinuxino:red:user"; + gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + }; diff --git a/target/linux/sunxi/patches-6.6/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch b/target/linux/sunxi/patches-6.6/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch new file mode 100644 index 0000000000..8670d06109 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch @@ -0,0 +1,35 @@ +From 1845163a052efac124f00656eb72f38947630a42 Mon Sep 17 00:00:00 2001 +From: Chukun Pan +Date: Sun, 10 Oct 2021 21:50:18 +0800 +Subject: [PATCH] arm64: dts: allwinner: NanoPi R1S H5: add status LED aliases + +Use the SYS LED on the casing for showing system status. + +Signed-off-by: Chukun Pan +--- + arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts +@@ -23,6 +23,11 @@ + ethernet0 = &emac; + ethernet1 = &rtl8189etv; + serial0 = &uart0; ++ ++ led-boot = &led_sys; ++ led-failsafe = &led_sys; ++ led-running = &led_sys; ++ led-upgrade = &led_sys; + }; + + chosen { +@@ -38,7 +43,7 @@ + gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; + }; + +- led-1 { ++ led_sys: led-1 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/sunxi/patches-6.6/442-arm64-dts-orangepi-one-plus-enable-PWM.patch b/target/linux/sunxi/patches-6.6/442-arm64-dts-orangepi-one-plus-enable-PWM.patch new file mode 100644 index 0000000000..76a73ee1f0 --- /dev/null +++ b/target/linux/sunxi/patches-6.6/442-arm64-dts-orangepi-one-plus-enable-PWM.patch @@ -0,0 +1,10 @@ +--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts +@@ -41,3 +41,7 @@ + reg = <1>; + }; + }; ++ ++&pwm { ++ status = "okay"; ++}; diff --git a/target/linux/sunxi/patches-6.6/450-arm64-dts-enable-wifi-on-pine64-boards.patch b/target/linux/sunxi/patches-6.6/450-arm64-dts-enable-wifi-on-pine64-boards.patch new file mode 100644 index 0000000000..3876852c2b --- /dev/null +++ b/target/linux/sunxi/patches-6.6/450-arm64-dts-enable-wifi-on-pine64-boards.patch @@ -0,0 +1,72 @@ +--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +@@ -42,6 +42,11 @@ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ ++ }; + }; + + &ac_power_supply { +@@ -102,6 +107,21 @@ + reg = <1>; + }; + }; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ vmmc-supply = <®_dldo4>; ++ vqmmc-supply = <®_eldo1>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ rtl8723cs: wifi@1 { ++ reg = <1>; ++ }; ++}; + + &mmc2 { + pinctrl-names = "default"; +--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +@@ -35,6 +35,11 @@ + }; + }; + }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ ++ }; + }; + + &codec { +@@ -124,6 +129,21 @@ + status = "okay"; + }; + ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ vmmc-supply = <®_dldo4>; ++ vqmmc-supply = <®_eldo1>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ rtl8723cs: wifi@1 { ++ reg = <1>; ++ }; ++}; ++ + &ohci0 { + status = "okay"; + };