From: David HERNANDEZ SANCHEZ Date: Thu, 6 Dec 2018 13:23:32 +0000 (+0000) Subject: thermal: stm32: read factory settings inside stm_thermal_prepare X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3c9d082064b5ec5876f7e20bc50959d1915c5ab0;p=openwrt%2Fstaging%2Fblogic.git thermal: stm32: read factory settings inside stm_thermal_prepare Calling stm_thermal_read_factory_settings before clocking internal peripheral causes bad register values and makes temperature computation wrong. Calling stm_thermal_read_factory_settings inside stm_thermal_prepare fixes this problem as internal peripheral is well clocked at this stage. Fixes: 1d693155 ("thermal: add stm32 thermal driver") Reviewed-by: Daniel Lezcano Signed-off-by: David Hernandez Sanchez Signed-off-by: Eduardo Valentin --- diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c index 47623da0f91b..daa1257809a6 100644 --- a/drivers/thermal/st/stm_thermal.c +++ b/drivers/thermal/st/stm_thermal.c @@ -532,6 +532,10 @@ static int stm_thermal_prepare(struct stm_thermal_sensor *sensor) if (ret) return ret; + ret = stm_thermal_read_factory_settings(sensor); + if (ret) + goto thermal_unprepare; + ret = stm_thermal_calibration(sensor); if (ret) goto thermal_unprepare; @@ -636,10 +640,6 @@ static int stm_thermal_probe(struct platform_device *pdev) /* Populate sensor */ sensor->base = base; - ret = stm_thermal_read_factory_settings(sensor); - if (ret) - return ret; - sensor->clk = devm_clk_get(&pdev->dev, "pclk"); if (IS_ERR(sensor->clk)) { dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n",