From: Jacob Keller Date: Fri, 27 Oct 2017 15:06:55 +0000 (-0400) Subject: i40e: Fix for NUP NVM image downgrade failure X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3d72aebfc61b025a2478c9d2bbc3c8c4036a1c05;p=openwrt%2Fstaging%2Fblogic.git i40e: Fix for NUP NVM image downgrade failure Since commit 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices") we've used the NVM lock to synchronize NVM reads even on devices which don't strictly need the lock. Doing so can cause a regression on older firmware prior to 1.5, especially when downgrading the firmware. Fix this by only grabbing the lock if we're running on an X722 device (which requires the lock as it uses the AdminQ to read the NVM), or if we're currently running 1.5 or newer firmware. Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c index 9dcb2a961197..9af74253c3f7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c @@ -613,6 +613,12 @@ i40e_status i40e_init_adminq(struct i40e_hw *hw) hw->flags |= I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE; } + /* Newer versions of firmware require lock when reading the NVM */ + if (hw->aq.api_maj_ver > 1 || + (hw->aq.api_maj_ver == 1 && + hw->aq.api_min_ver >= 5)) + hw->flags |= I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK; + /* The ability to RX (not drop) 802.1ad frames was added in API 1.7 */ if (hw->aq.api_maj_ver > 1 || (hw->aq.api_maj_ver == 1 && diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c index 0203665cb53c..13c79468a6da 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_common.c +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c @@ -948,7 +948,8 @@ i40e_status i40e_init_shared_code(struct i40e_hw *hw) hw->pf_id = (u8)(func_rid & 0x7); if (hw->mac.type == I40E_MAC_X722) - hw->flags |= I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE; + hw->flags |= I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE | + I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK; status = i40e_init_nvm(hw); return status; diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c index 0ccab0a5d717..7689c2ee0d46 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c +++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c @@ -328,15 +328,17 @@ static i40e_status __i40e_read_nvm_word(struct i40e_hw *hw, i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset, u16 *data) { - i40e_status ret_code; + i40e_status ret_code = 0; - ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); + if (hw->flags & I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK) + ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ); if (ret_code) return ret_code; ret_code = __i40e_read_nvm_word(hw, offset, data); - i40e_release_nvm(hw); + if (hw->flags & I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK) + i40e_release_nvm(hw); return ret_code; } diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h index 00d4833e9925..0e8568719b4e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_type.h +++ b/drivers/net/ethernet/intel/i40e/i40e_type.h @@ -629,6 +629,7 @@ struct i40e_hw { #define I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE BIT_ULL(0) #define I40E_HW_FLAG_802_1AD_CAPABLE BIT_ULL(1) #define I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE BIT_ULL(2) +#define I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK BIT_ULL(3) u64 flags; /* Used in set switch config AQ command */