From: Thomas Petazzoni Date: Tue, 7 Mar 2017 15:53:11 +0000 (+0100) Subject: net: mvpp2: adapt mvpp2_defaults_set() to PPv2.2 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3d9017d9449bf8756f881970c970999c9148d306;p=openwrt%2Fstaging%2Fblogic.git net: mvpp2: adapt mvpp2_defaults_set() to PPv2.2 This commit modifies the mvpp2_defaults_set() function to not do the loopback and FIFO threshold initialization, which are not needed for PPv2.2. Signed-off-by: Thomas Petazzoni Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index 91dca01b66a8..da48d6066e7d 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -4157,16 +4157,18 @@ static void mvpp2_defaults_set(struct mvpp2_port *port) { int tx_port_num, val, queue, ptxq, lrxq; - /* Configure port to loopback if needed */ - if (port->flags & MVPP2_F_LOOPBACK) - mvpp2_port_loopback_set(port); - - /* Update TX FIFO MIN Threshold */ - val = readl(port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG); - val &= ~MVPP2_GMAC_TX_FIFO_MIN_TH_ALL_MASK; - /* Min. TX threshold must be less than minimal packet length */ - val |= MVPP2_GMAC_TX_FIFO_MIN_TH_MASK(64 - 4 - 2); - writel(val, port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG); + if (port->priv->hw_version == MVPP21) { + /* Configure port to loopback if needed */ + if (port->flags & MVPP2_F_LOOPBACK) + mvpp2_port_loopback_set(port); + + /* Update TX FIFO MIN Threshold */ + val = readl(port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG); + val &= ~MVPP2_GMAC_TX_FIFO_MIN_TH_ALL_MASK; + /* Min. TX threshold must be less than minimal packet length */ + val |= MVPP2_GMAC_TX_FIFO_MIN_TH_MASK(64 - 4 - 2); + writel(val, port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG); + } /* Disable Legacy WRR, Disable EJP, Release from reset */ tx_port_num = mvpp2_egress_port(port);