From: Dmitry Tunin Date: Tue, 14 Aug 2018 12:52:01 +0000 (+0300) Subject: ath79: use both DIR-825 B1 power leds for boot status indication X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3d9610aa1343fae14c246ef57b2124a5c44e98d9;p=openwrt%2Fstaging%2Faparcar.git ath79: use both DIR-825 B1 power leds for boot status indication Use the orange led by default to match the bootloader/stock firmware behaviour. Turn on the blue power led after boot to indicate a finished boot and the orange one off. Signed-off-by: Dmitry Tunin [reword commit message, keep orange power led enabled during early kernel boot] Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts b/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts index c439d4f46d..5a3de683ed 100644 --- a/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts +++ b/target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts @@ -13,7 +13,7 @@ aliases { led-boot = &orange_power; led-failsafe = &orange_power; - led-running = &orange_power; + led-running = &blue_power; led-upgrade = &orange_power; }; @@ -41,9 +41,10 @@ orange_power: orange_power { label = "d-link:orange:power"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + default-state = "on"; }; - blue_power { + blue_power: blue_power { label = "d-link:blue:power"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; default-state = "off";