From: Rhyland Klein Date: Thu, 14 Jan 2016 19:24:35 +0000 (-0500) Subject: clk: tegra: Fix pllx dyn step calculation X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3dad5c5fa1d24c3bbb3e9e8ac0c52f35e045b807;p=openwrt%2Fstaging%2Fblogic.git clk: tegra: Fix pllx dyn step calculation The logic for calculating the input rate used when figuring out the proper dynamic steps for pllx was incorrect. It is supposed to be calculated using parent_rate / m but it was just using the parent rate directly, therefore using the wrong step values. Signed-off-by: Rhyland Klein Signed-off-by: Thierry Reding --- diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c index caae0dcc9cb5..ffcb86a667d9 100644 --- a/drivers/clk/tegra/clk-tegra210.c +++ b/drivers/clk/tegra/clk-tegra210.c @@ -780,13 +780,13 @@ static void pllx_get_dyn_steps(struct clk_hw *hw, u32 *step_a, u32 *step_b) { unsigned long input_rate; - if (!IS_ERR_OR_NULL(hw->clk)) { + /* cf rate */ + if (!IS_ERR_OR_NULL(hw->clk)) input_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); - /* cf rate */ - input_rate /= tegra_pll_get_fixed_mdiv(hw, input_rate); - } else { + else input_rate = 38400000; - } + + input_rate /= tegra_pll_get_fixed_mdiv(hw, input_rate); switch (input_rate) { case 12000000: