From: Matt Gomboc <gomboc0@gmail.com>
Date: Fri, 1 Mar 2013 22:53:30 +0000 (-0300)
Subject: [media] cx231xx : Add support for OTG102 aka EZGrabber2
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=3ead1ba31b24cb521a7256e19e6243f951f46ec8;p=openwrt%2Fstaging%2Fblogic.git

[media] cx231xx : Add support for OTG102 aka EZGrabber2

Thanks for the response, I have done as you suggested.
Below is an updated patch for the OTG102 device against http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/cx231xx, kernel version 3.8.
With further testing it appears the extra clauses in cx231xx-cards.c were not necessary (in static in cx231xx_init_dev and static int cx231xx_usb_probe), so those have been also been removed.

Signed-off-by: Matt Gomboc <gomboc0@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---

diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index 2e51fb9fd21c..235ba657d52e 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -357,6 +357,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
 	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
 	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
+	case CX231XX_BOARD_OTG102:
 		if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
 			while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
 						FLD_PWRDN_ENABLE_PLL)) {
@@ -1720,6 +1721,7 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
 	case CX231XX_BOARD_CNXT_RDU_250:
 	case CX231XX_BOARD_CNXT_VIDEO_GRABBER:
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
+	case CX231XX_BOARD_OTG102:
 		func_mode = 0x03;
 		break;
 	case CX231XX_BOARD_CNXT_RDE_253S:
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index b7b1acd7e7b0..13249e5a7891 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -634,6 +634,39 @@ struct cx231xx_board cx231xx_boards[] = {
 			.gpio = NULL,
 		} },
 	},
+	[CX231XX_BOARD_OTG102] = {
+		.name = "Geniatech OTG102",
+		.tuner_type = TUNER_ABSENT,
+		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
+		.ctl_pin_status_mask = 0xFFFFFFC4,
+		.agc_analog_digital_select_gpio = 0x0c, 
+			/* According with PV CxPlrCAP.inf file */
+		.gpio_pin_status_mask = 0x4001000,
+		.norm = V4L2_STD_NTSC,
+		.no_alt_vanc = 1,
+		.external_av = 1,
+		.dont_use_port_3 = 1,
+		/*.has_417 = 1, */
+		/* This board is believed to have a hardware encoding chip
+		 * supporting mpeg1/2/4, but as the 417 is apparently not
+		 * working for the reference board it is not here either. */
+
+		.input = {{
+				.type = CX231XX_VMUX_COMPOSITE1,
+				.vmux = CX231XX_VIN_2_1,
+				.amux = CX231XX_AMUX_LINE_IN,
+				.gpio = NULL,
+			}, {
+				.type = CX231XX_VMUX_SVIDEO,
+				.vmux = CX231XX_VIN_1_1 |
+					(CX231XX_VIN_1_2 << 8) |
+					CX25840_SVIDEO_ON,
+				.amux = CX231XX_AMUX_LINE_IN,
+				.gpio = NULL,
+			}
+		},
+	},
 };
 const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
 
@@ -675,6 +708,8 @@ struct usb_device_id cx231xx_id_table[] = {
 	 .driver_info = CX231XX_BOARD_ICONBIT_U100},
 	{USB_DEVICE(0x0fd9, 0x0037),
 	 .driver_info = CX231XX_BOARD_ELGATO_VIDEO_CAPTURE_V2},
+	{USB_DEVICE(0x1f4d, 0x0102),
+	 .driver_info = CX231XX_BOARD_OTG102},
 	{},
 };
 
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index a8e50d2d491c..dff3f1d73f28 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -71,6 +71,7 @@
 #define CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL 14
 #define CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC 15
 #define CX231XX_BOARD_ELGATO_VIDEO_CAPTURE_V2 16
+#define CX231XX_BOARD_OTG102 17
 
 /* Limits minimum and default number of buffers */
 #define CX231XX_MIN_BUF                 4