From: Igor Russkikh Date: Thu, 19 Oct 2017 15:23:59 +0000 (+0300) Subject: net: aquantia: Bad udp rate on default interrupt coalescing X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=417a3ae4b14909439bb49790f90201f450399845;p=openwrt%2Fstaging%2Fblogic.git net: aquantia: Bad udp rate on default interrupt coalescing Default Tx rates cause very long ISR delays on Tx. 0xff is 510us delay, giving only ~ 2000 interrupts per seconds for Tx rings cleanup. With these settings udp tx rate was never higher than ~800Mbps on a single stream. Changing min delay to 0xF makes it way better with ~6Gbps TCP stream performance is almost unaffected by this change, since LSO optimizations play important role. CPU load is affected insignificantly by this change. Signed-off-by: Pavel Belous Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 11f7e71bf448..ec68c20efcbd 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -821,12 +821,12 @@ static int hw_atl_b0_hw_interrupt_moderation_set(struct aq_hw_s *self) itr_rx |= rx_max_timer << 0x10U; } else { static unsigned int hw_atl_b0_timers_table_tx_[][2] = { - {0xffU, 0xffU}, /* 10Gbit */ - {0xffU, 0x1ffU}, /* 5Gbit */ - {0xffU, 0x1ffU}, /* 5Gbit 5GS */ - {0xffU, 0x1ffU}, /* 2.5Gbit */ - {0xffU, 0x1ffU}, /* 1Gbit */ - {0xffU, 0x1ffU}, /* 100Mbit */ + {0xfU, 0xffU}, /* 10Gbit */ + {0xfU, 0x1ffU}, /* 5Gbit */ + {0xfU, 0x1ffU}, /* 5Gbit 5GS */ + {0xfU, 0x1ffU}, /* 2.5Gbit */ + {0xfU, 0x1ffU}, /* 1Gbit */ + {0xfU, 0x1ffU}, /* 100Mbit */ }; static unsigned int hw_atl_b0_timers_table_rx_[][2] = {