From: Abhilash Tuse Date: Thu, 23 Mar 2017 06:04:32 +0000 (+0530) Subject: hostapd: fix reload frequency change patch X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=41feba8c4aa33ca3c6fa7c1a6c3224aae02440a7;p=openwrt%2Fstaging%2Fblogic.git hostapd: fix reload frequency change patch When sta is configured, hostapd receives 'stop' and 'update' command from wpa_supplicant. In the update command, hostapd gets sta parameters with which it configures ap. Problem is, with the default wireless configuration: mode:11g freq:2.4GHz channel:1 If sta is connected to 5GHz network, then ap does not work. Ideally with 340-reload_freq_change.patch hostapd should reload the frequency changes and start ap in 5GHz, but ap becomes invisible in the network. This issue can be reproduced with following /etc/config/wireless: config wifi-device radio0 option type mac80211 option channel 1 option hwmode 11g option path 'virtual/uccp420/uccwlan' option htmode 'none' config wifi-iface 'ap' option device 'radio0' option encryption 'none' option mode 'ap' option network 'ap' option ssid 'MyTestNet' option encryption none config wifi-iface 'sta' option device radio0 option network sta option mode sta option ssid TestNet-5G option encryption psk2 option key 12345 This change updates current_mode structure based on configured hw_mode received from wpa_supplicant. Also prepare rates table after frequency selection. Signed-off-by: Abhilash Tuse Signed-off-by: Felix Fietkau [cleanup, patch refresh] --- diff --git a/package/network/services/hostapd/patches/340-reload_freq_change.patch b/package/network/services/hostapd/patches/340-reload_freq_change.patch index 086ade9cedec..0dcd7c913e82 100644 --- a/package/network/services/hostapd/patches/340-reload_freq_change.patch +++ b/package/network/services/hostapd/patches/340-reload_freq_change.patch @@ -1,6 +1,6 @@ --- a/src/ap/hostapd.c +++ b/src/ap/hostapd.c -@@ -80,6 +80,16 @@ static void hostapd_reload_bss(struct ho +@@ -80,6 +80,25 @@ static void hostapd_reload_bss(struct ho #endif /* CONFIG_NO_RADIUS */ ssid = &hapd->conf->ssid; @@ -13,14 +13,39 @@ + hapd->iconf->vht_oper_chwidth, + hapd->iconf->vht_oper_centr_freq_seg0_idx, + hapd->iconf->vht_oper_centr_freq_seg1_idx); ++ ++ if (hapd->iface->current_mode) { ++ if (hostapd_prepare_rates(hapd->iface, hapd->iface->current_mode)) { ++ wpa_printf(MSG_ERROR, "Failed to prepare rates table."); ++ hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211, ++ HOSTAPD_LEVEL_WARNING, ++ "Failed to prepare rates table."); ++ } ++ } + if (!ssid->wpa_psk_set && ssid->wpa_psk && !ssid->wpa_psk->next && ssid->wpa_passphrase_set && ssid->wpa_passphrase) { /* -@@ -179,21 +189,12 @@ int hostapd_reload_config(struct hostapd +@@ -158,6 +177,7 @@ int hostapd_reload_config(struct hostapd + struct hostapd_data *hapd = iface->bss[0]; + struct hostapd_config *newconf, *oldconf; + size_t j; ++ int i; + + if (iface->config_fname == NULL) { + /* Only in-memory config in use - assume it has been updated */ +@@ -179,21 +199,20 @@ int hostapd_reload_config(struct hostapd oldconf = hapd->iconf; iface->conf = newconf; ++ for (i = 0; i < iface->num_hw_features; i++) { ++ struct hostapd_hw_modes *mode = &iface->hw_features[i]; ++ if (mode->mode == iface->conf->hw_mode) { ++ iface->current_mode = mode; ++ break; ++ } ++ } ++ + if (iface->conf->channel) + iface->freq = hostapd_hw_get_freq(hapd, iface->conf->channel); + diff --git a/package/network/services/hostapd/patches/600-ubus_support.patch b/package/network/services/hostapd/patches/600-ubus_support.patch index ee892e2bae14..bfab382985d0 100644 --- a/package/network/services/hostapd/patches/600-ubus_support.patch +++ b/package/network/services/hostapd/patches/600-ubus_support.patch @@ -41,7 +41,7 @@ HAPD_IFACE_DISABLED, --- a/src/ap/hostapd.c +++ b/src/ap/hostapd.c -@@ -284,6 +284,7 @@ static void hostapd_free_hapd_data(struc +@@ -302,6 +302,7 @@ static void hostapd_free_hapd_data(struc hapd->started = 0; wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface); @@ -49,7 +49,7 @@ iapp_deinit(hapd->iapp); hapd->iapp = NULL; accounting_deinit(hapd); -@@ -1142,6 +1143,8 @@ static int hostapd_setup_bss(struct host +@@ -1160,6 +1161,8 @@ static int hostapd_setup_bss(struct host if (hapd->driver && hapd->driver->set_operstate) hapd->driver->set_operstate(hapd->drv_priv, 1); @@ -58,7 +58,7 @@ return 0; } -@@ -1665,6 +1668,7 @@ static int hostapd_setup_interface_compl +@@ -1683,6 +1686,7 @@ static int hostapd_setup_interface_compl if (err) goto fail; @@ -66,7 +66,7 @@ wpa_printf(MSG_DEBUG, "Completing interface initialization"); if (iface->conf->channel) { #ifdef NEED_AP_MLME -@@ -1844,6 +1848,7 @@ dfs_offload: +@@ -1862,6 +1866,7 @@ dfs_offload: fail: wpa_printf(MSG_ERROR, "Interface initialization failed"); @@ -74,7 +74,7 @@ hostapd_set_state(iface, HAPD_IFACE_DISABLED); wpa_msg(hapd->msg_ctx, MSG_INFO, AP_EVENT_DISABLED); #ifdef CONFIG_FST -@@ -2292,6 +2297,7 @@ void hostapd_interface_deinit_free(struc +@@ -2310,6 +2315,7 @@ void hostapd_interface_deinit_free(struc (unsigned int) iface->conf->num_bss); driver = iface->bss[0]->driver; drv_priv = iface->bss[0]->drv_priv;