From: Christian Lamparter Date: Wed, 17 Jan 2018 22:38:48 +0000 (+0100) Subject: ipq806x: overhaul AVM FRITZ!box 4040 device-tree file X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=42b47f1b40ac211c0868ed04a356a1764ec7c876;p=openwrt%2Fstaging%2Fblogic.git ipq806x: overhaul AVM FRITZ!box 4040 device-tree file This patch aligns the device-tree file with the latest guidelines. - No longer include qcom-ipq4019-ap.dk01.1.dtsi. This file is only partially upstream and therefore subjected to changes that might not be compatible with the board. As a result, the definitions from the file have been copied into this dts. - exclusively use decimal GPIO addresses. - reorganize the reserved-memory layout to waste less memory. There's no point in keeping the u-boot loader around. This should also make it possible to create an image that will boot with the original EVA/ADAM2 loader without needing to install the modified u-boot loader. And finally mark the "tz-apps" as reusable. There isn't a way to upload apps to the trust-zone in OpenWrt yet. But it might see some use in the future as a "secure" key-store/TPM. - sort the first-level nodes alphabetically. - sort nodes with an address by the address. Signed-off-by: Christian Lamparter --- diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts index f7b9e2c1614d..f5ca3d5c5677 100644 --- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts +++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts @@ -14,51 +14,107 @@ * */ -#include "qcom-ipq4019-ap.dk01.1.dtsi" +#include "qcom-ipq4019.dtsi" #include "qcom-ipq4019-bus.dtsi" #include #include +#include / { model = "AVM FRITZ!Box 4040"; compatible = "avm,fritzbox-4040", "qcom,ipq4019"; + aliases { + led-boot = &power; + led-failsafe = &flash; + led-running = &power; + led-upgrade = &flash; + }; + reserved-memory { #address-cells = <0x1>; #size-cells = <0x1>; ranges; - rsvd1@87000000 { - reg = <0x87000000 0x500000>; - no-map; + tz_apps@87b80000 { + reg = <0x87b80000 0x280000>; + reusable; }; - wifi_dump@87500000 { - reg = <0x87500000 0x600000>; + smem@87e00000 { + reg = <0x87e00000 0x080000>; no-map; }; - rsvd2@87B00000 { - reg = <0x87b00000 0x500000>; + tz@87e80000 { + reg = <0x87e80000 0x180000>; no-map; }; }; -/* - This also works. Maybe it could be smaller still. - reserved-memory { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; + soc { + mdio@90000 { + status = "okay"; + }; - rsvd1@87E00000 { - reg = <0x87e00000 0x200000>; - no-map; + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "ok"; + }; + + serial@78af000 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + usb3@8af8800 { + status = "ok"; + }; + + crypto@8e3a000 { + status = "ok"; + }; + + wifi@a000000 { + status = "okay"; + }; + + wifi@a800000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "ok"; }; - }; -*/ - soc { qca8075: ess-switch@c000000 { status = "okay"; @@ -68,10 +124,14 @@ enable-usb-power { gpio-hog; line-name = "enable USB3 power"; - gpios = <0x7 GPIO_ACTIVE_HIGH>; + gpios = <7 GPIO_ACTIVE_HIGH>; output-high; }; }; + + edma@c080000 { + status = "okay"; + }; }; gpio-keys { @@ -79,7 +139,7 @@ wlan { label = "wlan"; - gpios = <&tlmm 0x3a GPIO_ACTIVE_LOW>; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; linux,code = ; }; @@ -90,52 +150,85 @@ }; }; - aliases { - led-boot = &power; - led-failsafe = &flash; - led-running = &power; - led-upgrade = &flash; - }; - gpio-leds { compatible = "gpio-leds"; wlan { label = "fritz4040:green:wlan"; - gpios = <&qca8075 0x1 GPIO_ACTIVE_HIGH>; + gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; }; panic: info_red { label = "fritz4040:red:info"; - gpios = <&qca8075 0x3 GPIO_ACTIVE_HIGH>; + gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; panic-indicator; }; wan { label = "fritz4040:green:wan"; - gpios = <&qca8075 0x5 GPIO_ACTIVE_HIGH>; + gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; }; power: power { label = "fritz4040:green:power"; - gpios = <&qca8075 0xb GPIO_ACTIVE_HIGH>; + gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; }; lan { label = "fritz4040:green:lan"; - gpios = <&qca8075 0xd GPIO_ACTIVE_HIGH>; + gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; }; flash: info_amber { label = "fritz4040:amber:info"; - gpios = <&qca8075 0xf GPIO_ACTIVE_HIGH>; + gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; }; }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&cryptobam { + status = "ok"; +}; + +&blsp_dma { + status = "ok"; }; &spi_0 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "ok"; + cs-gpios = <&tlmm 54 0>; + mx25l25635f@0 { - compatible = "mx25l25635f", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -206,12 +299,24 @@ }; partition11@2A0000 { label = "firmware"; - reg = <0x002A0000 0x01C60000>; + reg = <0x002a0000 0x01c60000>; }; partition12@1f00000 { label = "jffs2"; - reg = <0x01F00000 0x00100000>; + reg = <0x01f00000 0x00100000>; }; }; }; }; + +&usb3_ss_phy { + status = "ok"; +}; + +&usb3_hs_phy { + status = "ok"; +}; + +&usb2_hs_phy { + status = "ok"; +};