From: Adrian Schmutzler Date: Wed, 8 Jul 2020 11:36:54 +0000 (+0200) Subject: ramips: improve LED support for D-Link DIR-615 D series X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=42dc5c2a3fb680c481200ce8da5a772af83428f6;p=openwrt%2Fstaging%2Fynezz.git ramips: improve LED support for D-Link DIR-615 D series This patch adds a trigger for the WAN LED and enhances support for the WiFi LED by enabling activity indication. This is based on bug report feedback (see reference below). While at it, update the LED node names in DTS file. Fixes: FS#732 Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts b/target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts index fa415eb948..94372b2665 100644 --- a/target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts +++ b/target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts @@ -74,23 +74,23 @@ leds { compatible = "gpio-leds"; - status { + status_amber { label = "dir-615-d:amber:status"; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - led_status_green: status2 { + led_status_green: status_green { label = "dir-615-d:green:status"; gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; default-state = "on"; }; - wan { + wan_amber { label = "dir-615-d:amber:wan"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; - wan2 { + wan_green { label = "dir-615-d:green:wan"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds index ae813e85d6..8260b09821 100755 --- a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds @@ -33,7 +33,6 @@ dlink,dir-300-b7|\ dlink,dir-320-b1|\ dlink,dir-600-b1|\ dlink,dir-610-a1|\ -dlink,dir-615-d|\ dlink,dir-615-h1|\ dlink,dir-620-a1|\ engenius,esr-9753|\ @@ -66,6 +65,10 @@ asiarf,awapn2403) dlink,dcs-930l-b1) ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps" ;; +dlink,dir-615-d) + ucidef_set_led_netdev "wan" "WAN (green)" "$boardname:green:wan" "eth0.2" + set_wifi_led "rt2800soc-phy0::radio" + ;; dlink,dir-620-d1|\ trendnet,tew-714tru) set_wifi_led "$boardname:green:wifi"