From: Rosen Penev <rosenp@gmail.com>
Date: Mon, 16 Dec 2024 23:19:35 +0000 (-0800)
Subject: lantiq: use nvmem for tplink tdw89x0
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4348ed93c6eba8097da21ffcff682c8bf1eab6ea;p=openwrt%2Fstaging%2Fnbd.git

lantiq: use nvmem for tplink tdw89x0

These two devices use different wifi chips and as a result, different
calibration sizes. Move the differences out of dtsi.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16555
Signed-off-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8970.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8970.dts
index 1ac6440744..4bd70b528c 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8970.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8970.dts
@@ -4,3 +4,15 @@
 	compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
 	model = "TP-LINK TD-W8970";
 };
+
+&boardconfig {
+	cal_boardconfig_21000: calibration@21000 {
+		reg = <0x21000 0x440>;
+	};
+};
+
+&ath9k {
+	compatible = "pci168c,0030";
+	nvmem-cells = <&macaddr_ath9k_cal_f100 2>, <&cal_boardconfig_21000>;
+	nvmem-cell-names = "mac-address", "calibration";
+};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8980.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8980.dts
index 8221e0d5c5..a3fd642336 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8980.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw8980.dts
@@ -27,3 +27,15 @@
 
 	reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
 };
+
+&boardconfig {
+	cal_boardconfig_21000: calibration@21000 {
+		reg = <0x21000 0x3d8>;
+	};
+};
+
+&ath9k {
+	compatible = "pci168c,002e";
+	nvmem-cells = <&macaddr_ath9k_cal_f100 2>, <&cal_boardconfig_21000>;
+	nvmem-cell-names = "mac-address", "calibration";
+};
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
index c3e69f18fa..be9c8063b4 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi
@@ -200,15 +200,11 @@
 		#address-cells = <3>;
 		device_type = "pci";
 
-		ath9k: wifi@168c,002e {
-			compatible = "pci168c,002e";
+		ath9k: wifi@0,0 {
 			reg = <0 0 0 0 0>;
 			#gpio-cells = <2>;
 			gpio-controller;
-			qca,no-eeprom;
 			ieee80211-freq-limit = <2402000 2482000>;
-			nvmem-cells = <&macaddr_ath9k_cal_f100 2>;
-			nvmem-cell-names = "mac-address";
 		};
 	};
 };
@@ -244,12 +240,12 @@
 				read-only;
 			};
 
-			ath9k_cal: partition@7d0000 {
+			partition@7d0000 {
 				reg = <0x7d0000 0x30000>;
 				label = "boardconfig";
 				read-only;
 
-				nvmem-layout {
+				boardconfig: nvmem-layout {
 					compatible = "fixed-layout";
 					#address-cells = <1>;
 					#size-cells = <1>;
diff --git a/target/linux/lantiq/xrx200_legacy/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200_legacy/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
deleted file mode 100644
index c10065d5d5..0000000000
--- a/target/linux/lantiq/xrx200_legacy/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-case "$FIRMWARE" in
-	"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
-	"ath9k-eeprom-pci-0000:01:00.0.bin" | \
-	"ath9k-eeprom-pci-0000:02:00.0.bin")
-		board=$(board_name)
-
-		case "$board" in
-			tplink,tdw8970|\
-			tplink,tdw8980)
-				caldata_extract "boardconfig" 0x21000 0x1000
-				;;
-			*)
-				caldata_die "board $board is not supported yet"
-				;;
-		esac
-		;;
-esac