From: Bart Lauret Date: Mon, 25 Feb 2019 18:27:28 +0000 (+0100) Subject: ath79: add support for TP-Link Archer C5 v1 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=438605454980ee815a506a9a2a4a3532ab378922;p=openwrt%2Fstaging%2Fjow.git ath79: add support for TP-Link Archer C5 v1 TP-Link Archer C5 v1 is a dual band router based on Qualcomm/Atheros QCA9558 + QCA9880. Specification: - 720 MHz CPU - 128 MB of RAM (Various chips) - 16 MB of FLASH (Various chips) - SoC QCA9558 integrated 3T3R 2.4 GHz Wi-Fi - minipcie slot with 3T3R 5 GHz QCA9880-BR4A - 5x 10/100/1000 Mbps Ethernet (AR8327N Switch) - 10x LEDs, 2x software buttons For further informwation on the device, visit the wiki: Signed-off-by: Bart Lauret --- diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 9a1063c2ae..f1171695bd 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -146,6 +146,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:wan" ;; + tplink,archer-c5-v1|\ tplink,archer-c7-v1|\ tplink,archer-c7-v2|\ tplink,tl-wdr4900-v2) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index f4741fa3eb..096064b7ce 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -130,6 +130,7 @@ case "$FIRMWARE" in ath10kcal_extract "ART" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; + tplink,archer-c5-v1|\ tplink,archer-c7-v2) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) diff --git a/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts b/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts new file mode 100644 index 0000000000..05368bd7df --- /dev/null +++ b/target/linux/ath79/dts/qca9558_tplink_archer-c5-v1.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca9558_tplink_archer-c7.dtsi" + +/ { + compatible = "tplink,archer-c5-v1", "qca,qca9558"; + model = "TP-Link Archer C5 v1"; +}; + +&gpio_keys { + rfkill { + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + debounce-interval = <60>; + }; +}; + +&gpio_leds { + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; +}; + +&mtdparts { + uboot: u-boot@0 { + reg = <0x000000 0x020000>; + read-only; + }; + + firmware@20000 { + reg = <0x020000 0xfd0000>; + compatible = "tplink,firmware"; + }; + + art: art@ff0000 { + reg = <0xff0000 0x010000>; + read-only; + }; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index db11a6f4ba..5933988632 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -54,6 +54,16 @@ define Device/tplink_archer-c6-v2 endef TARGET_DEVICES += tplink_archer-c6-v2 +define Device/tplink_archer-c5-v1 + $(Device/tplink-16mlzma) + ATH_SOC := qca9558 + DEVICE_TITLE := TP-Link Archer C5 v1 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct + TPLINK_HWID := 0xc5000001 + SUPPORTED_DEVICES += archer-c5 +endef +TARGET_DEVICES += tplink_archer-c5-v1 + define Device/tplink_archer-c7-v1 $(Device/tplink-8mlzma) ATH_SOC := qca9558