From: John Marrett <johnf@zioncluster.ca>
Date: Thu, 13 Jul 2017 12:03:07 +0000 (-0400)
Subject: ramips: fix GL-inet GL-MT300N-V2 WAN/LAN MAC address
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4531bc4267c7701e3615a806a0fde8212076699a;p=openwrt%2Fstaging%2Fdangole.git

ramips: fix GL-inet GL-MT300N-V2 WAN/LAN MAC address

Correct MAC address lookup to appropriate offset based on vendor
source.

Override the WAN MAC to use the same address as LAN. The switch driver
increments the base MAC address for the WAN vlan but the stock firmware
uses the same MAC address for all interfaces.

Based on vendor source commit
https://github.com/domino-team/lede-1701/commit/efb0518

Signed-off-by: John Marrett <johnf@zioncluster.ca>
---

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 22b231bf96..f6129b527a 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -381,6 +381,9 @@ ramips_setup_macs()
 	e1700)
 		wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
 		;;
+	gl-mt300n-v2)
+		wan_mac=$(mtd_get_mac_binary factory 4)
+		;;
 	hc5*61|\
 	hc5661a|\
 	hc5962)
diff --git a/target/linux/ramips/dts/GL-MT300N-V2.dts b/target/linux/ramips/dts/GL-MT300N-V2.dts
index e40c4cf7df..442fc093a5 100644
--- a/target/linux/ramips/dts/GL-MT300N-V2.dts
+++ b/target/linux/ramips/dts/GL-MT300N-V2.dts
@@ -80,7 +80,7 @@
 };
 
 &ethernet {
-	mtd-mac-address = <&factory 0x4000>;
+	mtd-mac-address = <&factory 0x4>;
 };
 
 &wmac {