From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 28 Nov 2017 15:03:16 +0000 (+0000)
Subject: ARM: dts: imx6qdl-cubox-i: update GPIO specification
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4607135cc05a34f0297e81162135b979550ae9ff;p=openwrt%2Fstaging%2Fblogic.git

ARM: dts: imx6qdl-cubox-i: update GPIO specification

Fabio Estevam suggested using GPIO_ACTIVE_HIGH in the gpio specification
for the USB regulators.  Change them to conform.

Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index ca04ec56d2af..d1cfdc264126 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -73,7 +73,7 @@
 	v_usb2: regulator-v-usb2 {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio1 0 0>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
 		regulator-max-microvolt = <5000000>;
@@ -85,7 +85,7 @@
 	v_usb1: regulator-v-usb1 {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio3 22 0>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
 		regulator-max-microvolt = <5000000>;