From: James Chen Date: Fri, 18 Dec 2015 23:51:48 +0000 (-0800) Subject: Input: elants_i2c - fix wake-on-touch X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=478e5ed1c3f6928ece7fffd712ba728b1f92217d;p=openwrt%2Fstaging%2Fblogic.git Input: elants_i2c - fix wake-on-touch When sending "SLEEP" command to the controller it ceases scanning completely and is unable to wake the system up from sleep, so if it is configured as a wakeup source we should simply configure interrupt for wakeup and rely on idle logic within the controller to reduce power consumption while it is not used. Signed-off-by: James Chen Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 17cc20ef4923..ac09855fa435 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -1316,7 +1316,13 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev) disable_irq(client->irq); - if (device_may_wakeup(dev) || ts->keep_power_in_suspend) { + if (device_may_wakeup(dev)) { + /* + * The device will automatically enter idle mode + * that has reduced power consumption. + */ + ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0); + } else if (ts->keep_power_in_suspend) { for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { error = elants_i2c_send(client, set_sleep_cmd, sizeof(set_sleep_cmd)); @@ -1326,10 +1332,6 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev) dev_err(&client->dev, "suspend command failed: %d\n", error); } - - if (device_may_wakeup(dev)) - ts->wake_irq_enabled = - (enable_irq_wake(client->irq) == 0); } else { elants_i2c_power_off(ts); } @@ -1345,10 +1347,11 @@ static int __maybe_unused elants_i2c_resume(struct device *dev) int retry_cnt; int error; - if (device_may_wakeup(dev) && ts->wake_irq_enabled) - disable_irq_wake(client->irq); - - if (ts->keep_power_in_suspend) { + if (device_may_wakeup(dev)) { + if (ts->wake_irq_enabled) + disable_irq_wake(client->irq); + elants_i2c_sw_reset(client); + } else if (ts->keep_power_in_suspend) { for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { error = elants_i2c_send(client, set_active_cmd, sizeof(set_active_cmd));