From: Alberto Bursi Date: Sun, 12 Jul 2020 13:35:54 +0000 (+0200) Subject: mvebu: add Kobol Helios 4 device X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=480003e9eb0dac5dba032fbce64c35c34ff386ce;p=openwrt%2Fstaging%2Fzorun.git mvebu: add Kobol Helios 4 device The Helios 4 is a NAS from Kobol that is powered by an Armada 38x MicroSOM from Solidrun, similarly to Clearfog. This device has: -Armada 38x CPU (dual core ARMv7 1.6 Ghz) -2 GB of ECC RAM -Gigabit ethernet (Marvell) -2x USB 3.0 ports -4x Sata 3.0 ports -i2c header (J9 |>GND|SDA|SCL|VCC) -2x 3-pin fan headers with PWM -micro-usb port is a TTL/UART to USB converter connected to TTL -MicroSD card slot -System, 4xSata and 1xUSB LEDs NOT WORKING: fan control Fan Control requires a kernel patch that is available in the Armbian project (the "default firmware" of this device) and named mvebu-gpio-remove-hardcoded -timer-assignment This patch isn't acceptable by OpenWrt, it should be upstreamed. I also have that patch in my own local OpenWrt builds, in case you want a more clean and less confusing patch for upstreaming. To install, write the disk image on a micro SD card with dd or win32 disk imager, insert the card in the slot. Check that the dip switch battery for boot selection is as follows Switch 1 and 2 down/off, switches 3, 4, 5 up/on. Signed-off-by: Alberto Bursi --- diff --git a/target/linux/mvebu/config-4.19 b/target/linux/mvebu/config-4.19 index bf07ec58fd..3de6296a8d 100644 --- a/target/linux/mvebu/config-4.19 +++ b/target/linux/mvebu/config-4.19 @@ -31,6 +31,7 @@ CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_LIBATA_LEDS=y CONFIG_ARM=y CONFIG_ARMADA_370_CLK=y CONFIG_ARMADA_370_XP_IRQ=y @@ -64,6 +65,7 @@ CONFIG_ARM_UNWIND=y CONFIG_ARM_VIRT_EXT=y CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y CONFIG_ATA=y +CONFIG_ATA_LEDS=y CONFIG_ATAGS=y CONFIG_AUTO_ZRELADDR=y CONFIG_BLK_DEV_LOOP=y diff --git a/target/linux/mvebu/config-5.4 b/target/linux/mvebu/config-5.4 index 69c7ea3da8..9739ee62ae 100644 --- a/target/linux/mvebu/config-5.4 +++ b/target/linux/mvebu/config-5.4 @@ -37,6 +37,7 @@ CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_LIBATA_LEDS=y CONFIG_ARM=y CONFIG_ARMADA_370_CLK=y CONFIG_ARMADA_370_XP_IRQ=y @@ -69,6 +70,7 @@ CONFIG_ARM_UNWIND=y CONFIG_ARM_VIRT_EXT=y CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y CONFIG_ATA=y +CONFIG_ATA_LEDS=y CONFIG_ATAGS=y CONFIG_AUTO_ZRELADDR=y CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds index c62de013d4..5a2ca3fa85 100755 --- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds @@ -12,6 +12,9 @@ board=$(board_name) boardname="${board##*,}" case "$board" in +kobol,helios4) + ucidef_set_led_usbport "USB" "USB" "helios4:green:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" "usb5-port1" + ;; linksys,wrt1200ac) ucidef_set_led_netdev "wan" "WAN" "pca963x:caiman:white:wan" "wan" ucidef_set_led_usbport "usb1" "USB 1" "pca963x:caiman:white:usb2" "usb1-port1" diff --git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh index 6dccb491ba..42289209d5 100755 --- a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh @@ -10,6 +10,7 @@ REQUIRE_IMAGE_METADATA=1 platform_check_image() { case "$(board_name)" in cznic,turris-omnia|\ + kobol,helios4|\ solidrun,clearfog-base-a1|\ solidrun,clearfog-pro-a1) platform_check_image_sdcard "$1" @@ -26,6 +27,7 @@ platform_do_upgrade() { nand_do_upgrade "$1" ;; cznic,turris-omnia|\ + kobol,helios4|\ solidrun,clearfog-base-a1|\ solidrun,clearfog-pro-a1) platform_do_upgrade_sdcard "$1" @@ -46,6 +48,7 @@ platform_do_upgrade() { platform_copy_config() { case "$(board_name)" in cznic,turris-omnia|\ + kobol,helios4|\ solidrun,clearfog-base-a1|\ solidrun,clearfog-pro-a1) platform_copy_config_sdcard diff --git a/target/linux/mvebu/image/cortexa9.mk b/target/linux/mvebu/image/cortexa9.mk index 7f0a2fe697..5f32367431 100644 --- a/target/linux/mvebu/image/cortexa9.mk +++ b/target/linux/mvebu/image/cortexa9.mk @@ -51,6 +51,20 @@ define Device/globalscale_mirabox endef TARGET_DEVICES += globalscale_mirabox +define Device/kobol_helios4 + DEVICE_VENDOR := Kobol + DEVICE_MODEL := Helios4 + KERNEL_INSTALL := 1 + KERNEL := kernel-bin + DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils + IMAGES := sdcard.img.gz + IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata + SOC := armada-388 + UBOOT := helios4-u-boot-spl.kwb + BOOT_SCRIPT := clearfog +endef +TARGET_DEVICES += kobol_helios4 + define Device/linksys $(Device/NAND-128K) DEVICE_VENDOR := Linksys diff --git a/target/linux/mvebu/patches-4.19/560-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-4.19/560-helios4-dts-status-led-alias.patch new file mode 100644 index 0000000000..4c4fbec764 --- /dev/null +++ b/target/linux/mvebu/patches-4.19/560-helios4-dts-status-led-alias.patch @@ -0,0 +1,28 @@ +--- a/arch/arm/boot/dts/armada-388-helios4.dts ++++ b/arch/arm/boot/dts/armada-388-helios4.dts +@@ -15,6 +15,13 @@ + model = "Helios4"; + compatible = "kobol,helios4", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; ++ ++ aliases { ++ led-boot = &led_status; ++ led-failsafe = &led_status; ++ led-running = &led_status; ++ led-upgrade = &led_status; ++ }; + + memory { + device_type = "memory"; +@@ -70,10 +77,9 @@ + + system-leds { + compatible = "gpio-leds"; +- status-led { ++ led_status: status-led { + label = "helios4:green:status"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + diff --git a/target/linux/mvebu/patches-4.19/561-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-4.19/561-mvebu-armada-38x-enable-libata-leds.patch new file mode 100644 index 0000000000..3f9ad364de --- /dev/null +++ b/target/linux/mvebu/patches-4.19/561-mvebu-armada-38x-enable-libata-leds.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/mach-mvebu/Kconfig ++++ b/arch/arm/mach-mvebu/Kconfig +@@ -68,6 +68,7 @@ + select HAVE_SMP + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_38X ++ select ARCH_WANT_LIBATA_LEDS + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 380/385 SoC with device tree. diff --git a/target/linux/mvebu/patches-5.4/560-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-5.4/560-helios4-dts-status-led-alias.patch new file mode 100644 index 0000000000..4c4fbec764 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/560-helios4-dts-status-led-alias.patch @@ -0,0 +1,28 @@ +--- a/arch/arm/boot/dts/armada-388-helios4.dts ++++ b/arch/arm/boot/dts/armada-388-helios4.dts +@@ -15,6 +15,13 @@ + model = "Helios4"; + compatible = "kobol,helios4", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; ++ ++ aliases { ++ led-boot = &led_status; ++ led-failsafe = &led_status; ++ led-running = &led_status; ++ led-upgrade = &led_status; ++ }; + + memory { + device_type = "memory"; +@@ -70,10 +77,9 @@ + + system-leds { + compatible = "gpio-leds"; +- status-led { ++ led_status: status-led { + label = "helios4:green:status"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + diff --git a/target/linux/mvebu/patches-5.4/561-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-5.4/561-mvebu-armada-38x-enable-libata-leds.patch new file mode 100644 index 0000000000..3f9ad364de --- /dev/null +++ b/target/linux/mvebu/patches-5.4/561-mvebu-armada-38x-enable-libata-leds.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/mach-mvebu/Kconfig ++++ b/arch/arm/mach-mvebu/Kconfig +@@ -68,6 +68,7 @@ + select HAVE_SMP + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_38X ++ select ARCH_WANT_LIBATA_LEDS + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 380/385 SoC with device tree.