From: Adrian Schmutzler Date: Wed, 3 Jul 2019 21:22:25 +0000 (+0200) Subject: ramips/mt7620: Name DTS files based on scheme X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=48047b3a5c6aa9fff89a7a9c7ec76d8335b1a8e7;p=openwrt%2Fstaging%2Fneocturne.git ramips/mt7620: Name DTS files based on scheme As introduced with ath79, DTS files for ramips will now be labelled soc_vendor_device.dts(i). With this change, DTS files can be selected automatically without further manual links. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/AC1200RM.dts b/target/linux/ramips/dts/AC1200RM.dts deleted file mode 100644 index 388b088d92..0000000000 --- a/target/linux/ramips/dts/AC1200RM.dts +++ /dev/null @@ -1,183 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright (C) 2018 Piotr Dymacz - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of any - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc"; - model = "ALFA Network AC1200RM"; - - aliases { - led-boot = &led_wps; - led-failsafe = &led_wps; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - wlan2g { - label = "ac1200rm:green:wlan2g"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - led_wps: wps { - label = "ac1200rm:green:wps"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; - mediatek,portmap = "llllw"; - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&ohci { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - - led { - led-sources = <2>; - led-active-low; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "nd_sd", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x1000>; - }; - - partition@31000 { - label = "config"; - reg = <0x31000 0xf000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/AI-BR100.dts b/target/linux/ramips/dts/AI-BR100.dts deleted file mode 100644 index 8de4b5877a..0000000000 --- a/target/linux/ramips/dts/AI-BR100.dts +++ /dev/null @@ -1,117 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "aigale,ai-br100", "ralink,mt7620a-soc"; - model = "Aigale Ai-BR100"; - - aliases { - led-boot = &led_wlan; - led-failsafe = &led_wlan; - led-running = &led_wlan; - led-upgrade = &led_wlan; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "ai-br100:blue:wan"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - - led_wlan: wlan { - label = "ai-br100:blue:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0 0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "u-boot-env"; - reg = <0x20000 0x10000>; - read-only; - }; - - factory: partition@30000 { - label = "factory"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@40000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x40000 0x7c0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/ArcherC2-v1.dts b/target/linux/ramips/dts/ArcherC2-v1.dts deleted file mode 100644 index e20b873569..0000000000 --- a/target/linux/ramips/dts/ArcherC2-v1.dts +++ /dev/null @@ -1,191 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc"; - model = "TP-Link Archer C2 v1"; - - aliases { - led-boot = &led_wps; - led-failsafe = &led_wps; - led-running = &led_wps; - led-upgrade = &led_wps; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk"; - ralink,function = "gpio"; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - lan { - label = "c2-v1:green:lan"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "c2-v1:green:usb"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - led_wps: wps { - label = "c2-v1:green:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - wan { - label = "c2-v1:green:wan"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "c2-v1:green:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset_wps { - label = "reset_wps"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - rfkill { - label = "rfkill"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - rtl8367rb { - compatible = "realtek,rtl8367b", "rtl8367b"; - cpu_port = <6>; - realtek,extif1 = <1 0 1 1 1 1 1 1 2>; - mii-bus = <&mdio0>; - }; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - compatible = "tplink,firmware"; - label = "firmware"; - reg = <0x20000 0x7a0000>; - }; - - partition@7c0000 { - label = "config"; - reg = <0x7c0000 0x10000>; - read-only; - }; - - rom: partition@7d0000 { - label = "rom"; - reg = <0x7d0000 0x10000>; - read-only; - }; - - partition@7e0000 { - label = "romfile"; - reg = <0x7e0000 0x10000>; - read-only; - }; - - radio: partition@7f0000 { - label = "radio"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -ðernet { - status = "okay"; - mtd-mac-address = <&rom 0xf100>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - - port@5 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - }; - - mdio0: mdio-bus { - status = "okay"; - }; -}; - - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&wmac { - ralink,mtd-eeprom = <&radio 0>; - mtd-mac-address = <&rom 0xf100>; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&radio 0x8000>; - }; -}; diff --git a/target/linux/ramips/dts/ArcherC20i.dts b/target/linux/ramips/dts/ArcherC20i.dts deleted file mode 100644 index 7dfaddeee4..0000000000 --- a/target/linux/ramips/dts/ArcherC20i.dts +++ /dev/null @@ -1,159 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "tplink,archer-c20i", "ralink,mt7620a-soc"; - model = "TP-Link Archer C20i"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - lan { - label = "c20i:blue:lan"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - }; - usb { - label = "c20i:blue:usb"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - wps { - label = "c20i:blue:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - wan { - label = "c20i:blue:wan"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - wlan { - label = "c20i:blue:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - rfkill { - label = "rfkill"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset_wps { - label = "reset_wps"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - compatible = "tplink,firmware"; - label = "firmware"; - reg = <0x20000 0x7a0000>; - }; - - partition@7c0000 { - label = "config"; - reg = <0x7c0000 0x10000>; - }; - - rom: partition@7d0000 { - label = "rom"; - reg = <0x7d0000 0x10000>; - }; - - partition@7e0000 { - label = "romfile"; - reg = <0x7e0000 0x10000>; - }; - - radio: partition@7f0000 { - label = "radio"; - reg = <0x7f0000 0x10000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - mtd-mac-address = <&rom 0xf100>; - mediatek,portmap = "wllll"; - }; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&radio 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&radio 32768>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; diff --git a/target/linux/ramips/dts/ArcherC20v1.dts b/target/linux/ramips/dts/ArcherC20v1.dts deleted file mode 100644 index 602cc70e02..0000000000 --- a/target/linux/ramips/dts/ArcherC20v1.dts +++ /dev/null @@ -1,199 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "tplink,archer-c20-v1", "ralink,mt7620a-soc"; - model = "TP-Link Archer C20 v1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - lan { - label = "c20-v1:blue:lan"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "c20-v1:blue:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - usb { - label = "c20-v1:blue:usb"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - wan { - label = "c20-v1:blue:wan"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - }; - - wan_orange { - label = "c20-v1:orange:wan"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "c20-v1:blue:wlan5g"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "c20-v1:blue:wlan2g"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "c20-v1:blue:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - rfkill { - label = "rfkill"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - compatible = "tplink,firmware"; - label = "firmware"; - reg = <0x20000 0x7a0000>; - }; - - partition@7c0000 { - label = "config"; - reg = <0x7c0000 0x10000>; - read-only; - }; - - rom: partition@7d0000 { - label = "rom"; - reg = <0x7d0000 0x10000>; - read-only; - }; - - partition@7e0000 { - label = "romfile"; - reg = <0x7e0000 0x10000>; - read-only; - }; - - radio: partition@7f0000 { - label = "radio"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - mtd-mac-address = <&rom 0xf100>; - mediatek,portmap = "wllll"; - }; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&radio 0>; - mtd-mac-address = <&rom 0xf100>; - mtd-mac-address-increment = <(-2)>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&radio 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - mtd-mac-address = <&rom 0xf100>; - mtd-mac-address-increment = <(-1)>; - }; -}; diff --git a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts deleted file mode 100644 index b1e13bebea..0000000000 --- a/target/linux/ramips/dts/ArcherC50.dts +++ /dev/null @@ -1,198 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "tplink,archer-c50-v1", "ralink,mt7620a-soc"; - model = "TP-Link Archer C50 v1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - lan { - label = "c50:green:lan"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "c50:green:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - usb { - label = "c50:green:usb"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - wan { - label = "c50:green:wan"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; - - wan_orange { - label = "c50:orange:wan"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - - wlan5g { - label = "c50:green:wlan5g"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "c50:green:wlan2g"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "c50:green:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - rfkill { - label = "rfkill"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - compatible = "tplink,firmware"; - label = "firmware"; - reg = <0x20000 0x7a0000>; - }; - - partition@7c0000 { - label = "config"; - reg = <0x7c0000 0x10000>; - read-only; - }; - - rom: partition@7d0000 { - label = "rom"; - reg = <0x7d0000 0x10000>; - read-only; - }; - - partition@7e0000 { - label = "romfile"; - reg = <0x7e0000 0x10000>; - read-only; - }; - - radio: partition@7f0000 { - label = "radio"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - mtd-mac-address = <&rom 0xf100>; - mediatek,portmap = "wllll"; - }; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&radio 0>; - mtd-mac-address = <&rom 0xf100>; - mtd-mac-address-increment = <(-2)>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&radio 32768>; - ieee80211-freq-limit = <5000000 6000000>; - mtd-mac-address = <&rom 0xf100>; - mtd-mac-address-increment = <(-1)>; - }; -}; diff --git a/target/linux/ramips/dts/ArcherMR200.dts b/target/linux/ramips/dts/ArcherMR200.dts deleted file mode 100644 index 566b2431fc..0000000000 --- a/target/linux/ramips/dts/ArcherMR200.dts +++ /dev/null @@ -1,202 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "tplink,archer-mr200", "ralink,mt7620a-soc"; - model = "TP-Link Archer MR200"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - lan { - label = "mr200:white:lan"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - }; - - wan { - label = "mr200:white:wan"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "mr200:white:power"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - 4g { - label = "mr200:white:4g"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "mr200:white:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - signal1 { - label = "mr200:white:signal1"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - signal2 { - label = "mr200:white:signal2"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - }; - - signal3 { - label = "mr200:white:signal3"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - }; - - signal4 { - label = "mr200:white:signal4"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "mr200:white:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - - rfkill { - label = "rfkill"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - power_usb { - gpio-export,name = "power_usb1"; - gpio-export,output = <1>; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - compatible = "tplink,firmware"; - label = "firmware"; - reg = <0x20000 0x7b0000>; - }; - - rom: partition@7d0000 { - label = "rom"; - reg = <0x7d0000 0x10000>; - read-only; - }; - - partition@7e0000 { - label = "romfile"; - reg = <0x7e0000 0x10000>; - read-only; - }; - - radio: partition@7f0000 { - label = "radio"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - mtd-mac-address = <&rom 0xf100>; - mediatek,portmap = "llll"; - }; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&radio 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&radio 32768>; - }; -}; diff --git a/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts b/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts deleted file mode 100644 index e71d14c6ab..0000000000 --- a/target/linux/ramips/dts/BDCOM-WAP2100-SK.dts +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc"; - model = "BDCOM WAP2100-SK"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - usb { - label = "wap2100-sk:green:usb"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - led_power: wps { - label = "wap2100-sk:green:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "wap2100-sk:green:wlan2g"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf70000>; - }; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "spi refclk", "uartf", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/BOCCO.dts b/target/linux/ramips/dts/BOCCO.dts deleted file mode 100644 index cc9c6688dc..0000000000 --- a/target/linux/ramips/dts/BOCCO.dts +++ /dev/null @@ -1,165 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "yukai,bocco", "ralink,mt7620a-soc"; - model = "YUKAI Engineering BOCCO"; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - s1 { - gpio-export,name = "rec"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - s2 { - gpio-export,name = "play"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "Audio-I2S"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - simple-audio-card,widgets = - "Headphone", "Headphones"; - simple-audio-card,routing = - "Headphones", "HP_L", - "Headphones", "HP_R"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - - dailink0_master: simple-audio-card,codec { - sound-dai = <&codec>; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&i2c { - status = "okay"; - - codec: wm8960@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8960"; - reg = <0x1a>; - - wlf,shared-lrclk; - }; -}; - -&i2s { - #sound-dai-cells = <0>; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pcm_i2s_pins>; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pcm { - status = "okay"; -}; - -&gdma { - status = "okay"; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "spi refclk", "rgmii1"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&gsw { - ralink,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/BR-6478AC-V2.dts b/target/linux/ramips/dts/BR-6478AC-V2.dts deleted file mode 100644 index 5c90aa1549..0000000000 --- a/target/linux/ramips/dts/BR-6478AC-V2.dts +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Device Tree file for the Edimax BR-6478AC V2 - * based on Linksys E1700 - * - * Copyright (C) 2016 Rohan Murch - * Copyright (C) 2016 Hans Ulli Kroll - * Copyright (C) 2017 James McKenzie - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "edimax,br-6478ac-v2", "ralink,mt7620a-soc"; - model = "Edimax BR-6478AC v2"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset_wps { - label = "reset_wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "br-6478ac-v2:white:power"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - internet { - label = "br-6478ac-v2:blue:internet"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - wlan { - label = "br-6478ac-v2:blue:wlan"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - usb { - label = "br-6478ac-v2:blue:usb"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - }; - - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - usb-power { - gpio-export,name="usb-power"; - gpio-export,output=<1>; - gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; - }; - }; -}; - - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0 0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "cimage"; - reg = <0x50000 0x20000>; - read-only; - }; - - partition@70000 { - compatible = "edimax,uimage"; - label = "firmware"; - reg = <0x00070000 0x00790000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - status = "okay"; - mtd-mac-address = <&factory 0x4>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - mediatek,portmap = "wllll"; - - port@5 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - phy-mode = "rgmii"; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - phy-mode = "rgmii"; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy1f: ethernet-phy@1f { - reg = <0x1f>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - mediatek,2ghz = <0>; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/C108.dts b/target/linux/ramips/dts/C108.dts deleted file mode 100644 index 2d89d34ad5..0000000000 --- a/target/linux/ramips/dts/C108.dts +++ /dev/null @@ -1,187 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2017 Kristian Evensen . - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "hnet,c108", "ralink,mt7620a-soc"; - model = "HNET C108"; - - aliases { - led-boot = &led_lan_green; - led-failsafe = &led_lan_green; - led-running = &led_lan_green; - led-upgrade = &led_lan_green; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - power_modem { - gpio-export,name = "power_modem"; - gpio-export,output = <1>; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - sdcard { - label = "c108:green:sdcard"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - - modem_green { - label = "c108:green:modem"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - modem_red { - label = "c108:red:modem"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - lan_red { - label = "c108:red:lan"; - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - }; - - led_lan_green: lan_green { - label = "c108:green:lan"; - gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - en25q128@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "spi refclk", "ephy"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/CF-WR800N.dts b/target/linux/ramips/dts/CF-WR800N.dts deleted file mode 100644 index 65f44e43d7..0000000000 --- a/target/linux/ramips/dts/CF-WR800N.dts +++ /dev/null @@ -1,125 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc"; - model = "Comfast CF-WR800N"; - - aliases { - led-boot = &led_wps; - led-failsafe = &led_wps; - led-running = &led_wps; - led-upgrade = &led_wps; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - ethernet { - label = "cf-wr800n:white:ethernet"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "cf-wr800n:white:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - led_wps: wps { - label = "cf-wr800n:white:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "ephy", "wled", "spi refclk", "i2c"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/CS-QR10.dts b/target/linux/ramips/dts/CS-QR10.dts deleted file mode 100644 index dadd37acba..0000000000 --- a/target/linux/ramips/dts/CS-QR10.dts +++ /dev/null @@ -1,158 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "planex,cs-qr10", "ralink,mt7620a-soc"; - model = "Planex CS-QR10"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "cs-qr10:red:power"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - s1 { - label = "reset"; - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - s2 { - label = "wps"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&i2c { - status = "okay"; -}; - -&i2s { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pcm_i2s_pins>; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pcm { - status = "okay"; -}; - -&gdma { - status = "okay"; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "spi refclk", "rgmii1"; - ralink,function = "gpio"; - }; - wdt { - ralink,group = "wdt"; - ralink,function = "wdt refclk"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&gsw { - ralink,port4 = "ephy"; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/D240.dts b/target/linux/ramips/dts/D240.dts deleted file mode 100644 index 2110959ee8..0000000000 --- a/target/linux/ramips/dts/D240.dts +++ /dev/null @@ -1,206 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2017 Kristian Evensen . - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "sanlinking,d240", "ralink,mt7620a-soc"; - model = "Sanlinking Technologies D240"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - power_mpcie2 { - gpio-export,name = "power_mpcie2"; - gpio-export,output = <1>; - gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; - }; - - power_mpcie1 { - gpio-export,name = "power_mpcie1"; - gpio-export,output = <1>; - gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "d240:blue:power"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - - usb { - label = "d240:blue:usb"; - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - air { - label = "d240:blue:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - en25q128@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&sdhci { - status = "okay"; - /* the pins function is already set during pinmux driver load */ - /delete-property/ pinctrl-0; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; - ralink,function = "gpio"; - }; - - /* - * The sd function of the nd_sd group configures two of the - * groups pins as gpios. The pins are used as PCIe reset/power. - * Due to the driver load order, the pins are configured way to - * late if triggered by the sd-card driver. - * To not introduce another kind of driver load order - * dependency and configure the pins as early as possible, - * means during pinmux driver load. - */ - gpio_sd { - ralink,group = "nd_sd"; - ralink,function = "sd"; - }; - }; -}; - -&pcie { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/DB-WRT01.dts b/target/linux/ramips/dts/DB-WRT01.dts deleted file mode 100644 index bb2c14e096..0000000000 --- a/target/linux/ramips/dts/DB-WRT01.dts +++ /dev/null @@ -1,106 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "planex,db-wrt01", "ralink,mt7620a-soc"; - model = "Planex DB-WRT01"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "db-wrt01:orange:power"; - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - s1 { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "spi refclk", "rgmii1"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/DCH-M225.dts b/target/linux/ramips/dts/DCH-M225.dts deleted file mode 100644 index 0644378ba2..0000000000 --- a/target/linux/ramips/dts/DCH-M225.dts +++ /dev/null @@ -1,191 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "dlink,dch-m225", "ralink,mt7620a-soc"; - model = "D-Link DCH-M225"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "dch-m225:green:power"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - status { - label = "dch-m225:red:status"; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "Audio-I2S"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - simple-audio-card,widgets = - "Headphone", "Headphones"; - simple-audio-card,routing = - "Headphones", "HP_L", - "Headphones", "HP_R"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - - dailink0_master: simple-audio-card,codec { - sound-dai = <&codec>; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&i2c { - status = "okay"; - - codec: wm8960@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8960"; - reg = <0x1a>; - - wlf,shared-lrclk; - }; -}; - -&i2s { - #sound-dai-cells = <0>; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mdio_refclk_pins>; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <80000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x4000>; - read-only; - }; - - factory: partition@34000 { - label = "factory"; - reg = <0x34000 0x4000>; - read-only; - }; - - nvram: partition@38000 { - label = "nvram"; - reg = <0x38000 0x8000>; - read-only; - }; - - partition@40000 { - label = "devconf"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "upgrade_rec"; - reg = <0x50000 0x100000>; - read-only; - }; - - partition@150000 { - compatible = "seama"; - label = "firmware"; - reg = <0x150000 0x6b0000>; - }; - }; - }; -}; - -&gdma { - status = "okay"; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "wdt", "rgmii1"; - ralink,function = "gpio"; - }; - - gpio_i2s { - ralink,group = "uartf"; - ralink,function = "gpio i2s"; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; -}; - -&gsw { - ralink,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; diff --git a/target/linux/ramips/dts/DIR-510L.dts b/target/linux/ramips/dts/DIR-510L.dts deleted file mode 100644 index 885e64f9f2..0000000000 --- a/target/linux/ramips/dts/DIR-510L.dts +++ /dev/null @@ -1,142 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "dlink,dir-510l", "ralink,mt7620a-soc"; - model = "D-Link DIR-510L"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - chosen { - bootargs = "console=ttyS1,57600"; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - label = "dir-510l:green:status"; - gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; - }; - - status-red { - label = "dir-510l:red:status"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - }; - - }; -}; - -ðernet { - mediatek,portmap = "llllw"; -}; - -&uart { - status = "okay"; -}; - -&gpio0 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "jboot"; - reg = <0x0 0x10000>; - read-only; - }; - - partition@10000 { - label = "recovery"; - reg = <0x10000 0x200000>; - read-only; - }; - - partition@210000 { - compatible = "amit,jimage"; - label = "firmware"; - reg = <0x210000 0xde0000>; - }; - - config: partition@ff0000 { - label = "config"; - reg = <0xff0000 0x10000>; - read-only; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76x0e@0,0 { - reg = <0x0000 0 0 0 0>; - mtd-mac-address = <&config 0xe490>; - mtd-mac-address-increment = <(2)>; - mediatek,mtd-eeprom = <&config 0xe05d>; - }; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - diff --git a/target/linux/ramips/dts/DIR-810L.dts b/target/linux/ramips/dts/DIR-810L.dts deleted file mode 100644 index d728449a48..0000000000 --- a/target/linux/ramips/dts/DIR-810L.dts +++ /dev/null @@ -1,154 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "dlink,dir-810l", "ralink,mt7620a-soc"; - model = "D-Link DIR-810L"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power_green: power { - label = "dir-810l:green:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "dir-810l:orange:wan"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - - power2 { - label = "dir-810l:orange:power"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - factory5g: partition@50000 { - label = "factory5g"; - reg = <0x50000 0x10000>; - read-only; - }; - - partition@60000 { - label = "Wolf_Config"; - reg = <0x60000 0x10000>; - read-only; - }; - - partition@70000 { - label = "MyDlink"; - reg = <0x70000 0x80000>; - read-only; - }; - - partition@e0000 { - label = "Jffs2"; - reg = <0xe0000 0x80000>; - read-only; - }; - - partition@170000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x170000 0x690000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; - mediatek,portmap = "llllw"; -}; - -&gsw { - mediatek,port4 = "ephy"; - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; -}; - -&pcie { - status = "okay"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; diff --git a/target/linux/ramips/dts/DWR-116-A1.dts b/target/linux/ramips/dts/DWR-116-A1.dts deleted file mode 100644 index 6f76a64039..0000000000 --- a/target/linux/ramips/dts/DWR-116-A1.dts +++ /dev/null @@ -1,114 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "dlink,dwr-116-a1", "ralink,mt7620n-soc"; - model = "D-Link DWR-116 A1/A2"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - label = "dwr-116-a1:green:status"; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - - wifi { - label = "dwr-116-a1:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "jboot"; - reg = <0x0 0x10000>; - read-only; - }; - - partition@10000 { - compatible = "amit,jimage"; - label = "firmware"; - reg = <0x10000 0x7e0000>; - }; - - config: partition@7f0000 { - label = "config"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - mediatek,portmap = "llllw"; - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; -}; diff --git a/target/linux/ramips/dts/DWR-118-A1.dts b/target/linux/ramips/dts/DWR-118-A1.dts deleted file mode 100644 index 707bc1c3d3..0000000000 --- a/target/linux/ramips/dts/DWR-118-A1.dts +++ /dev/null @@ -1,194 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc"; - model = "D-Link DWR-118 A1"; - - aliases { - led-boot = &led_internet; - led-failsafe = &led_internet; - led-upgrade = &led_internet; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "dwr-118-a1:green:wan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - led_internet: internet { - label = "dwr-118-a1:green:internet"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "dwr-118-a1:green:lan"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "dwr-118-a1:green:wlan2g"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "dwr-118-a1:green:usb"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb { - gpio-export,name = "usb"; - gpio-export,output = <0>; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <80000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "jboot"; - reg = <0x0 0x10000>; - read-only; - }; - - partition@10000 { - compatible = "amit,jimage"; - label = "firmware"; - reg = <0x10000 0xfe0000>; - }; - - config: partition@ff0000 { - label = "config"; - reg = <0xff0000 0x10000>; - read-only; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "ephy", "uartf", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mtd-mac-address = <&config 0xe496>; - mtd-mac-address-increment = <(2)>; - mediatek,mtd-eeprom = <&config 0xe083>; - - led { - led-sources = <0>; - led-active-low; - }; - }; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - - port@4 { - status = "okay"; - phy-handle = <&phy4>; - phy-mode = "rgmii"; - }; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii-rxid"; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii-rxid"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; diff --git a/target/linux/ramips/dts/DWR-118-A2.dts b/target/linux/ramips/dts/DWR-118-A2.dts deleted file mode 100644 index 26b23aa6d1..0000000000 --- a/target/linux/ramips/dts/DWR-118-A2.dts +++ /dev/null @@ -1,183 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "dlink,dwr-118-a2", "ralink,mt7620a-soc"; - model = "D-Link DWR-118 A2"; - - aliases { - led-boot = &led_internet; - led-failsafe = &led_internet; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "dwr-118-a2:green:wan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - led_internet: internet { - label = "dwr-118-a2:green:internet"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "dwr-118-a2:green:lan"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "dwr-118-a2:green:wlan2g"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "dwr-118-a2:green:usb"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb { - gpio-export,name = "usb"; - gpio-export,output = <1>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "jboot"; - reg = <0x0 0x10000>; - read-only; - }; - - partition@10000 { - compatible = "amit,jimage"; - label = "firmware"; - reg = <0x10000 0xfe0000>; - }; - - config: partition@ff0000 { - label = "config"; - reg = <0xff0000 0x10000>; - read-only; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "ephy", "uartf", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - ieee80211-freq-limit = <5000000 6000000>; - mtd-mac-address = <&config 0xe4a8>; - mtd-mac-address-increment = <(2)>; - - led { - led-sources = <2>; - led-active-low; - }; - }; -}; - -ðernet { - status = "okay"; - mediatek,portmap = "wllll"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &mdio_pins>; - - port@4 { - status = "okay"; - phy-handle = <&phy0>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii-rxid"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; - mediatek,ephy-base-address = /bits/ 16 < 2 >; -}; diff --git a/target/linux/ramips/dts/DWR-921-C1.dts b/target/linux/ramips/dts/DWR-921-C1.dts deleted file mode 100644 index 92bcd54a42..0000000000 --- a/target/linux/ramips/dts/DWR-921-C1.dts +++ /dev/null @@ -1,152 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "dlink,dwr-921-c1", "ralink,mt7620n-soc"; - model = "D-Link DWR-921 C1"; - - aliases { - led-boot = &led_sstrenghg; - led-failsafe = &led_sstrenghg; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - sms { - label = "dwr-921-c1:green:sms"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "dwr-921-c1:green:lan"; - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - - led_sstrenghg: sstrengthg { - label = "dwr-921-c1:green:sigstrength"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - sstrengthr { - label = "dwr-921-c1:red:sigstrength"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - 4g { - label = "dwr-921-c1:green:4g"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - }; - - 3g { - label = "dwr-921-c1:green:3g"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "dwr-921-c1:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - lte_modem_enable { - gpio-export,name = "lte_modem_enable"; - gpio-export,output = <1>; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "jboot"; - reg = <0x0 0x10000>; - read-only; - }; - - partition@10000 { - compatible = "amit,jimage"; - label = "firmware"; - reg = <0x10000 0xfe0000>; - }; - - config: partition@ff0000 { - label = "config"; - reg = <0xff0000 0x10000>; - read-only; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - port@4 { - status = "okay"; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "spi refclk", "i2c", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/DWR-922-E2.dts b/target/linux/ramips/dts/DWR-922-E2.dts deleted file mode 100644 index c2dd26a09d..0000000000 --- a/target/linux/ramips/dts/DWR-922-E2.dts +++ /dev/null @@ -1,154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "dlink,dwr-922-e2", "ralink,mt7620n-soc"; - model = "D-Link DWR-922 E2"; - - aliases { - led-boot = &sstrengthg; - led-failsafe = &sstrengthg; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - led-boot = &sstrengthg; - - sms { - label = "dwr-922-e2:green:sms"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "dwr-922-e2:green:lan"; - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - - sstrengthg: sstrengthg { - label = "dwr-922-e2:green:sigstrength"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - sstrengthr { - label = "dwr-922-e2:red:sigstrength"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - 4g { - label = "dwr-922-e2:green:4g"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - }; - - 3g { - label = "dwr-922-e2:green:3g"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "dwr-922-e2:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - lte_modem_enable { - gpio-export,name = "lte_modem_enable"; - gpio-export,output = <1>; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "jboot"; - reg = <0x0 0x10000>; - read-only; - }; - - partition@10000 { - compatible = "amit,jimage"; - label = "firmware"; - reg = <0x10000 0xfe0000>; - }; - - config: partition@ff0000 { - label = "config"; - reg = <0xff0000 0x10000>; - read-only; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - port@4 { - status = "okay"; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "spi refclk", "i2c", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/E1700.dts b/target/linux/ramips/dts/E1700.dts deleted file mode 100644 index 2ea7400a71..0000000000 --- a/target/linux/ramips/dts/E1700.dts +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Device Tree file for the Linksys E1700 - * - * Copyright (C) 2014 Imre Kaloz - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "linksys,e1700", "ralink,mt7620a-soc"; - model = "Linksys E1700"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "e1700:green:power"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - wan { - label = "e1700:green:wps"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "config"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - status = "okay"; - mtd-mac-address = <&factory 0x28>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - - port@5 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - phy-mode = "rgmii"; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - phy-mode = "rgmii"; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy1f: ethernet-phy@1f { - reg = <0x1f>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/EW-7476RPC.dts b/target/linux/ramips/dts/EW-7476RPC.dts deleted file mode 100644 index 0f35ee0f3c..0000000000 --- a/target/linux/ramips/dts/EW-7476RPC.dts +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include "EW-747x.dtsi" - -/ { - compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc"; - model = "Edimax EW-7476RPC"; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "ew-7476rpc:green:power"; - gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "ew-7476rpc:green:lan"; - gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "ew-7476rpc:blue:wlan2g"; - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1radio"; - }; - - wlan5g { - label = "ew-7476rpc:blue:wlan5g"; - gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0radio"; - }; - - wps { - label = "ew-7476rpc:green:wps"; - gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - }; - - crossband { - label = "ew-7476rpc:green:crossband"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - }; - }; -}; - diff --git a/target/linux/ramips/dts/EW-7478AC.dts b/target/linux/ramips/dts/EW-7478AC.dts deleted file mode 100644 index ba33405e65..0000000000 --- a/target/linux/ramips/dts/EW-7478AC.dts +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include "EW-747x.dtsi" - -/ { - compatible = "edimax,ew-7478ac", "ralink,mt7620a-soc"; - model = "Edimax EW-7478AC"; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "ew-7478ac:green:power"; - gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "ew-7478ac:green:lan"; - gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "ew-7478ac:blue:wlan2g"; - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1radio"; - }; - - wlan5g { - label = "ew-7478ac:blue:wlan5g"; - gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0radio"; - }; - - wps { - label = "ew-7478ac:green:wps"; - gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - }; - - crossband { - label = "ew-7478ac:green:crossband"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - }; - }; -}; diff --git a/target/linux/ramips/dts/EW-7478APC.dts b/target/linux/ramips/dts/EW-7478APC.dts deleted file mode 100644 index bd1768b34e..0000000000 --- a/target/linux/ramips/dts/EW-7478APC.dts +++ /dev/null @@ -1,202 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "edimax,ew-7478apc", "ralink,mt7620a-soc"; - model = "Edimax EW-7478APC"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset_wps { - label = "reset_wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "ew-7478apc:white:power"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - internet { - label = "ew-7478apc:blue:internet"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "ew-7478apc:blue:wlan"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "ew-7478apc:blue:usb"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - }; -}; - -&gpio2 { - status = "okay"; - - enable_usb_power { - gpio-hog; - line-name = "enable USB power"; - gpios = <5 GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "cimage"; - reg = <0x50000 0x20000>; - read-only; - }; - - partition@70000 { - compatible = "edimax,uimage"; - label = "firmware"; - reg = <0x00070000 0x00790000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - status = "okay"; - mtd-mac-address = <&factory 0x4>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - mediatek,portmap = "wllll"; - - port@5 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - phy-mode = "rgmii"; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - phy-mode = "rgmii"; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy1f: ethernet-phy@1f { - reg = <0x1f>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - mediatek,2ghz = <0>; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/EW-747x.dtsi b/target/linux/ramips/dts/EW-747x.dtsi deleted file mode 100644 index b7d8087d5a..0000000000 --- a/target/linux/ramips/dts/EW-747x.dtsi +++ /dev/null @@ -1,192 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "ralink,mt7620a-soc"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - keys { - compatible = "gpio-keys"; - - reset_wps { - label = "reset_wps"; - gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - switch_high { - label = "switch high"; - gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - switch_off { - label = "switch off"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "cimage"; - reg = <0x50000 0x20000>; - read-only; - }; - - partition@70000 { - compatible = "edimax,uimage"; - label = "firmware"; - reg = <0x00070000 0x00790000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "nd_sd", "rgmii2"; - ralink,function = "gpio"; - }; - }; - - phy_reset_pins: phy-reset { - gpio { - ralink,group = "spi refclk"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - - status = "okay"; - mtd-mac-address = <&factory 0x4>; - - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>; - - mediatek,portmap = "l"; - mediatek,mdio-mode = <1>; - - phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - phy-reset-duration = <30>; - - port@5 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy0: ethernet-phy@0 { - status = "disabled"; - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - status = "disabled"; - reg = <1>; - phy-mode = "rgmii"; - }; - - phy2: ethernet-phy@2 { - status = "disabled"; - reg = <2>; - phy-mode = "rgmii"; - }; - - phy3: ethernet-phy@3 { - status = "disabled"; - reg = <3>; - phy-mode = "rgmii"; - }; - - phy4: ethernet-phy@4 { - status = "disabled"; - reg = <4>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port5 = "gmac"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - mediatek,2ghz = <0>; - }; -}; diff --git a/target/linux/ramips/dts/EX2700.dts b/target/linux/ramips/dts/EX2700.dts deleted file mode 100644 index 7d7b2220f7..0000000000 --- a/target/linux/ramips/dts/EX2700.dts +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Device Tree file for the Netgear EX2700 - * - * Copyright (C) 2016 Joseph C. Lehner - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "netgear,ex2700", "ralink,mt7620a-soc"; - model = "Netgear EX2700"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - leds { - compatible = "gpio-leds"; - - led_power_green: power_g { - label = "ex2700:green:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - power_r { - label = "ex2700:red:power"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - device_g { - label = "ex2700:green:device"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - - device_r { - label = "ex2700:red:device"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - router_g { - label = "ex2700:green:router"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - router_r { - label = "ex2700:red:router"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "ex2700:green:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@40000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x40000 0x3b0000>; - }; - - art: partition@3f0000 { - label = "art"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&art 0x0>; -}; - -&wmac { - mtd-mac-address = <&art 0x6>; - ralink,mtd-eeprom = <&art 0x1000>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "spi refclk"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/EX3700.dts b/target/linux/ramips/dts/EX3700.dts deleted file mode 100644 index d971909b29..0000000000 --- a/target/linux/ramips/dts/EX3700.dts +++ /dev/null @@ -1,170 +0,0 @@ -/* This file is released into the public domain */ - -/dts-v1/; - -#include -#include - -#include "mt7620a.dtsi" - -/ { - compatible = "netgear,ex3700", "ralink,mt7620a-soc"; - model = "Netgear EX3700/EX3800"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - leds { - compatible = "gpio-leds"; - - led_power_green: power_g { - label = "ex3700:green:power"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - power_a { - label = "ex3700:amber:power"; - gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - }; - - router_g { - label = "ex3700:green:router"; - gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; - }; - - router_r { - label = "ex3700:red:router"; - gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; - }; - - device_g { - label = "ex3700:green:device"; - gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; - }; - - device_r { - label = "ex3700:red:device"; - gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "ex3700:green:wps"; - gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "config"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x790000>; - }; - - partition@7e0000 { - label = "board_data"; - reg = <0x7e0000 0x10000>; - read-only; - }; - - partition@7f0000 { - label = "nvram"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0 >; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0x0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "rgmii2", "spi refclk"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/GL-MT300A.dts b/target/linux/ramips/dts/GL-MT300A.dts deleted file mode 100644 index 2cea9d9beb..0000000000 --- a/target/linux/ramips/dts/GL-MT300A.dts +++ /dev/null @@ -1,151 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "glinet,gl-mt300a", "ralink,mt7620a-soc"; - model = "GL-MT300A"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "gl-mt300a:wan"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "gl-mt300a:lan"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "gl-mt300a:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "gl-mt300a:usb"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - BTN_0 { - label = "BTN_0"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - BTN_1 { - label = "BTN_1"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf80000>; - }; - - partition@ff0000 { - label = "art"; - reg = <0xff0000 0x10000>; - }; - }; - }; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4000>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "wled","ephy","uartf","i2c"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/GL-MT300N.dts b/target/linux/ramips/dts/GL-MT300N.dts deleted file mode 100644 index a30792cace..0000000000 --- a/target/linux/ramips/dts/GL-MT300N.dts +++ /dev/null @@ -1,142 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc"; - model = "GL-MT300N"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "gl-mt300n:wan"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "gl-mt300n:lan"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "gl-mt300n:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - BTN_0 { - label = "BTN_0"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - BTN_1 { - label = "BTN_1"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf80000>; - }; - - partition@ff0000 { - label = "art"; - reg = <0xff0000 0x10000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4000>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "wled","ephy","i2c"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/GL-MT750.dts b/target/linux/ramips/dts/GL-MT750.dts deleted file mode 100644 index 11133a126a..0000000000 --- a/target/linux/ramips/dts/GL-MT750.dts +++ /dev/null @@ -1,157 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "glinet,gl-mt750", "ralink,mt7620a-soc"; - model = "GL-MT750"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "gl-mt750:wan"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "gl-mt750:lan"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "gl-mt750:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - BTN_0 { - label = "BTN_0"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - BTN_1 { - label = "BTN_1"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf80000>; - }; - - partition@ff0000 { - label = "art"; - reg = <0xff0000 0x10000>; - }; - }; - }; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4000>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "wled","ephy","uartf"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/HC5661.dts b/target/linux/ramips/dts/HC5661.dts deleted file mode 100644 index 091483a131..0000000000 --- a/target/linux/ramips/dts/HC5661.dts +++ /dev/null @@ -1,39 +0,0 @@ -/dts-v1/; - -#include "HC5X61.dtsi" - -/ { - compatible = "hiwifi,hc5661", "hiwifi,hc5x61", "ralink,mt7620a-soc"; - model = "HiWiFi HC5661"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - leds { - compatible = "gpio-leds"; - - led_system: system { - label = "hc5661:blue:system"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - internet { - label = "hc5661:blue:internet"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "hc5661:blue:wlan2g"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - wlan5g { - label = "hc5661:blue:wlan5g"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - }; -}; diff --git a/target/linux/ramips/dts/HC5761.dts b/target/linux/ramips/dts/HC5761.dts deleted file mode 100644 index dff129a938..0000000000 --- a/target/linux/ramips/dts/HC5761.dts +++ /dev/null @@ -1,59 +0,0 @@ -/dts-v1/; - -#include "HC5X61.dtsi" - -/ { - compatible = "hiwifi,hc5761", "hiwifi,hc5x61", "ralink,mt7620a-soc"; - model = "HiWiFi HC5761"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - leds { - compatible = "gpio-leds"; - - led_system: system { - label = "hc5761:blue:system"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - internet { - label = "hc5761:blue:internet"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "hc5761:blue:wlan2g"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - wlan5g { - label = "hc5761:blue:wlan5g"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; diff --git a/target/linux/ramips/dts/HC5861.dts b/target/linux/ramips/dts/HC5861.dts deleted file mode 100644 index b1d5ce4fa1..0000000000 --- a/target/linux/ramips/dts/HC5861.dts +++ /dev/null @@ -1,105 +0,0 @@ -/dts-v1/; - -#include "HC5X61.dtsi" - -/ { - compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc"; - model = "HiWiFi HC5861"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - leds { - compatible = "gpio-leds"; - - led_system: system { - label = "hc5861:blue:system"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "hc5861:blue:wlan2g"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - internet { - label = "hc5861:blue:internet"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - wlan5g { - label = "hc5861:blue:wlan5g"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - - turbo { - label = "hc5861:blue:turbo"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usbpower { - gpio-export,name = "usbpower"; - gpio-export,output = <0>; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - - sdpower { - gpio-export,name = "sdpower"; - gpio-export,output = <0>; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - status = "okay"; - mtd-mac-address = <&factory 0x4>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &mdio_pins>; - mediatek,portmap = "wllll"; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "pci14c3,7662"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; diff --git a/target/linux/ramips/dts/HC5X61.dtsi b/target/linux/ramips/dts/HC5X61.dtsi deleted file mode 100644 index 09b303fd33..0000000000 --- a/target/linux/ramips/dts/HC5X61.dtsi +++ /dev/null @@ -1,136 +0,0 @@ -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "hiwifi,hc5x61", "ralink,mt7620a-soc"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usbpower { - gpio-export,name = "usbpower"; - gpio-export,output = <1>; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&sysc { - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf80000>; - }; - - partition@fd0000 { - label = "hwf_config"; - reg = <0xfd0000 0x10000>; - read-only; - }; - - bdinfo: partition@fe0000 { - label = "bdinfo"; - reg = <0xfe0000 0x10000>; - read-only; - }; - - partition@ff0000 { - label = "backup"; - reg = <0xff0000 0x10000>; - read-only; - }; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&sdhci { - status = "okay"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "uartf", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/HDRM200.dts b/target/linux/ramips/dts/HDRM200.dts deleted file mode 100644 index ad16d02716..0000000000 --- a/target/linux/ramips/dts/HDRM200.dts +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "head-weblink,hdrm200", "ralink,mt7620a-soc"; - model = "Head Weblink HDRM200"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - chosen { - bootargs = "console=ttyS1,57600"; - }; - - leds { - compatible = "gpio-leds"; - - rssi { - label = "hdrm200:red:rssi"; - gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - }; - - led_system: system { - label = "hdrm200:green:system"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - - air { - label = "hdrm200:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - firmware: partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - status = "okay"; - - mtd-mac-address = <&factory 0x4>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - - port@4 { - status = "okay"; - phy-handle = <&phy4>; - phy-mode = "rgmii"; - }; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "pa", "spi refclk", - "wled"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&uart { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/K2G.dts b/target/linux/ramips/dts/K2G.dts deleted file mode 100644 index 4ca5229745..0000000000 --- a/target/linux/ramips/dts/K2G.dts +++ /dev/null @@ -1,144 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "phicomm,k2g", "ralink,mt7620a-soc"; - model = "Phicomm K2G"; - - aliases { - led-boot = &led_blue; - led-failsafe = &led_blue; - led-running = &led_blue; - led-upgrade = &led_blue; - serial0 = &uartlite; - }; - - leds { - compatible = "gpio-leds"; - - led_blue: blue { - label = "k2g:blue:status"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - yellow { - label = "k2g:yellow:status"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - red { - label = "k2g:red:status"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x30000>; - label = "u-boot"; - read-only; - }; - - partition@30000 { - reg = <0x30000 0x10000>; - label = "u-boot-env"; - read-only; - }; - - factory: partition@40000 { - reg = <0x40000 0x10000>; - label = "factory"; - read-only; - }; - - partition@50000 { - reg = <0x50000 0x50000>; - label = "permanent_config"; - read-only; - }; - - partition@a0000 { - compatible = "denx,uimage"; - reg = <0xa0000 0x760000>; - label = "firmware"; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii2_pins &mdio_pins>; - mtd-mac-address = <&factory 0x28>; - mediatek,portmap = "llllw"; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; diff --git a/target/linux/ramips/dts/LR-25G001.dts b/target/linux/ramips/dts/LR-25G001.dts deleted file mode 100644 index 20974c93e2..0000000000 --- a/target/linux/ramips/dts/LR-25G001.dts +++ /dev/null @@ -1,181 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "lava,lr-25g001", "ralink,mt7620a-soc"; - model = "LAVA LR-25G001"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - label = "lr-25g001:green:status"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - wifi2g { - label = "lr-25g001:green:wifi2g"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - wifi5g { - label = "lr-25g001:green:wifi5g"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usbpower { - gpio-export,name = "usbpower"; - gpio-export,output = <1>; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "jboot"; - reg = <0x0 0x10000>; - read-only; - }; - - partition@10000 { - compatible = "amit,jimage"; - label = "firmware"; - reg = <0x10000 0xfe0000>; - }; - - config: partition@ff0000 { - label = "config"; - reg = <0xff0000 0x10000>; - read-only; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - - port@5 { - status = "okay"; - phy-mode = "rgmii"; - mediatek,fixed-link = <1000 1 1 1>; - }; - - mdio-bus { - status = "okay"; - mediatek,mdio-mode = <1>; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - qca,ar8327-initvals = < - 0x04 0x87300000 /* PORT0 PAD MODE CTRL */ - 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */ - 0x7c 0x0000007e /* PORT0_STATUS */ - 0x94 0x00000000 /* PORT6_STATUS */ - >; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - phy-mode = "rgmii"; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - phy-mode = "rgmii"; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76x0e@0,0 { - reg = <0x0000 0 0 0 0>; - mtd-mac-address = <&config 0xe07e>; - mtd-mac-address-increment = <(2)>; - mediatek,mtd-eeprom = <&config 0xe08a>; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "uartf", "i2c"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/MIWIFI-MINI.dts b/target/linux/ramips/dts/MIWIFI-MINI.dts deleted file mode 100644 index e8ff02f2ab..0000000000 --- a/target/linux/ramips/dts/MIWIFI-MINI.dts +++ /dev/null @@ -1,162 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc"; - model = "Xiaomi MiWiFi Mini"; - - aliases { - led-boot = &led_blue; - led-failsafe = &led_blue; - led-running = &led_blue; - led-upgrade = &led_blue; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led_blue: blue { - label = "miwifi-mini:blue:status"; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - yellow { - label = "miwifi-mini:yellow:status"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - - red { - label = "miwifi-mini:red:status"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf80000>; - }; - - partition@fd0000 { - label = "crash"; - reg = <0xfd0000 0x10000>; - }; - - partition@fe0000 { - label = "reserved"; - reg = <0xfe0000 0x10000>; - read-only; - }; - - partition@ff0000 { - label = "Bdata"; - reg = <0xff0000 0x10000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x28>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "rgmii1"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/MLW221.dts b/target/linux/ramips/dts/MLW221.dts deleted file mode 100644 index 815370e6fd..0000000000 --- a/target/linux/ramips/dts/MLW221.dts +++ /dev/null @@ -1,132 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "kingston,mlw221", "ralink,mt7620n-soc"; - model = "Kingston MLW221"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - leds { - compatible = "gpio-leds"; - - led_system: system { - label = "mlw221:blue:system"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "mlw221:blue:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - system { - label = "system"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf60000>; - }; - - partition@fb0000 { - label = "user-config"; - reg = <0xfb0000 0x50000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/MLWG2.dts b/target/linux/ramips/dts/MLWG2.dts deleted file mode 100644 index f88af71896..0000000000 --- a/target/linux/ramips/dts/MLWG2.dts +++ /dev/null @@ -1,132 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "kingston,mlwg2", "ralink,mt7620n-soc"; - model = "Kingston MLWG2"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - leds { - compatible = "gpio-leds"; - - led_system: system { - label = "mlwg2:blue:system"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "mlwg2:blue:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - system { - label = "system"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf60000>; - }; - - partition@fb0000 { - label = "user-config"; - reg = <0xfb0000 0x50000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/MT7620a.dts b/target/linux/ramips/dts/MT7620a.dts deleted file mode 100644 index c9d3d76729..0000000000 --- a/target/linux/ramips/dts/MT7620a.dts +++ /dev/null @@ -1,130 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "ralink,mt7620a-evb", "ralink,mt7620a-soc"; - model = "Ralink MT7620a + MT7610e evaluation board"; - - keys { - compatible = "gpio-keys"; - poll-interval = <20>; - - s2 { - label = "S2"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - s3 { - label = "S3"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - mediatek,portmap = "llllw"; - - port@4 { - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&phy4>; - }; - - port@5 { - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - - mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&sdhci { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/MT7620a_MT7530.dts b/target/linux/ramips/dts/MT7620a_MT7530.dts deleted file mode 100644 index 976e2acca3..0000000000 --- a/target/linux/ramips/dts/MT7620a_MT7530.dts +++ /dev/null @@ -1,120 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -/ { - compatible = "ralink,mt7620a-mt7530-evb", "ralink,mt7620a-soc"; - model = "Ralink MT7620a + MT7530 evaluation board"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - mediatek,portmap = "llllw"; - - port@5 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - phy-mode = "rgmii"; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - phy-mode = "rgmii"; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy1f: ethernet-phy@1f { - reg = <0x1f>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&pcie { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/MT7620a_MT7610e.dts b/target/linux/ramips/dts/MT7620a_MT7610e.dts deleted file mode 100644 index a2864de94f..0000000000 --- a/target/linux/ramips/dts/MT7620a_MT7610e.dts +++ /dev/null @@ -1,99 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "ralink,mt7620a-mt7610e-evb", "ralink,mt7620a-soc"; - model = "Ralink MT7620A evaluation board"; - - keys { - compatible = "gpio-keys"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <1000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mediatek,portmap = "llllw"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&sdhci { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; diff --git a/target/linux/ramips/dts/MT7620a_V22SG.dts b/target/linux/ramips/dts/MT7620a_V22SG.dts deleted file mode 100644 index 33d23f2201..0000000000 --- a/target/linux/ramips/dts/MT7620a_V22SG.dts +++ /dev/null @@ -1,120 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "ralink,mt7620a-v22sg-evb", "ralink,mt7620a-soc"; - model = "Ralink MT7620a V22SG High Power evaluation board"; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - aoss { - label = "aoss"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - nand { - compatible = "mtk,mt7620-nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x20000>; - read-only; - }; - - factory: partition@60000 { - label = "factory"; - reg = <0x60000 0x20000>; - read-only; - }; - - partition@80000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x80000 0x7f80000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "spi"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - mediatek,portmap = "llllw"; - - port@4 { - status = "okay"; - phy-handle = <&phy4>; - phy-mode = "rgmii"; - }; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&pcie { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/MZK-750DHP.dts b/target/linux/ramips/dts/MZK-750DHP.dts deleted file mode 100644 index a4a6c9b8be..0000000000 --- a/target/linux/ramips/dts/MZK-750DHP.dts +++ /dev/null @@ -1,137 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc"; - model = "Planex MZK-750DHP"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - wps { - label = "mzk-750dhp:green:wps"; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "mzk-750dhp:green:power"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - wlan5g { - label = "mzk-750dhp:green:wlan5g"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - s1 { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - s2 { - label = "wps"; - gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - }; -}; diff --git a/target/linux/ramips/dts/MZK-EX300NP.dts b/target/linux/ramips/dts/MZK-EX300NP.dts deleted file mode 100644 index 6578d952c0..0000000000 --- a/target/linux/ramips/dts/MZK-EX300NP.dts +++ /dev/null @@ -1,142 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "planex,mzk-ex300np", "ralink,mt7620a-soc"; - model = "Planex MZK-EX300NP"; - - aliases { - led-boot = &led_wps; - led-failsafe = &led_wps; - led-running = &led_wps; - led-upgrade = &led_wps; - }; - - leds { - compatible = "gpio-leds"; - - wifi { - label = "mzk-ex300np:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - led_wps: wps { - label = "mzk-ex300np:green:wps"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - - rep { - label = "mzk-ex300np:blue:rep"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - wifi1 { - label = "mzk-ex300np:blue:wifi1"; - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - }; - - wifi2 { - label = "mzk-ex300np:blue:wifi2"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - - wifi3 { - label = "mzk-ex300np:blue:wifi3"; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x730000>; - }; - - partition@780000 { - label = "Udata"; - reg = <0x780000 0x80000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "spi refclk", "rgmii1", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts b/target/linux/ramips/dts/MZK-EX750NP.dts deleted file mode 100644 index 497693d393..0000000000 --- a/target/linux/ramips/dts/MZK-EX750NP.dts +++ /dev/null @@ -1,158 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc"; - model = "Planex MZK-EX750NP"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "mzk-ex750np:red:power"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "mzk-ex750np:red:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "mzk-ex750np:green:wps"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - rep { - label = "mzk-ex750np:blue:rep"; - gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; - }; - - wifi1 { - label = "mzk-ex750np:blue:wifi1"; - gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; - }; - - wifi2 { - label = "mzk-ex750np:blue:wifi2"; - gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; - }; - - wifi3 { - label = "mzk-ex750np:blue:wifi3"; - gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x730000>; - }; - - partition@780000 { - label = "Udata"; - reg = <0x780000 0x80000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "uartf", "nd_sd", "rgmii2", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - }; -}; diff --git a/target/linux/ramips/dts/MicroWRT.dts b/target/linux/ramips/dts/MicroWRT.dts deleted file mode 100644 index a010a9c626..0000000000 --- a/target/linux/ramips/dts/MicroWRT.dts +++ /dev/null @@ -1,108 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "microduino,microwrt", "ralink,mt7620a-soc"; - model = "Microduino MicroWRT"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "u-boot-env"; - reg = <0x20000 0x10000>; - read-only; - }; - - factory: partition@30000 { - label = "factory"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@40000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x40000 0xfc0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "wled", "i2c", "wdt", "uartf"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/NA930.dts b/target/linux/ramips/dts/NA930.dts deleted file mode 100644 index 6d85914265..0000000000 --- a/target/linux/ramips/dts/NA930.dts +++ /dev/null @@ -1,187 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "sercomm,na930", "ralink,mt7620a-soc"; - model = "Sercomm NA930"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS1,57600"; - }; - - nand { - compatible = "mtk,mt7620-nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@200000 { - label = "factory"; - reg = <0x200000 0x40000>; - read-only; - }; - - partition@240000 { - label = "Config"; - reg = <0x240000 0x400000>; - read-only; - }; - - partition@640000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x640000 0x1400000>; - }; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - zwave { - label = "zwave"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - zwave { - label = "na930:blue:zwave"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - status { - label = "na930:blue:status"; - gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - service { - label = "na930:blue:service"; - gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "na930:blue:power"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - telit { - gpio-export,name = "telit"; - gpio-export,output = <1>; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "rgmii2", "spi", "ephy"; - ralink,function = "gpio"; - }; - - uartf_gpio { - ralink,group = "uartf"; - ralink,function = "gpio uartf"; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &mdio_pins>; - mediatek,portmap = "llllw"; - - port@4 { - status = "okay"; - phy-handle = <&phy4>; - phy-mode = "rgmii"; - }; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/OY-0001.dts b/target/linux/ramips/dts/OY-0001.dts deleted file mode 100644 index 6b93b8d089..0000000000 --- a/target/linux/ramips/dts/OY-0001.dts +++ /dev/null @@ -1,130 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc"; - model = "OY-0001"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led_power: powerled { - label = "oy-0001:green:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - wifiled { - label = "oy-0001:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - s1 { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mediatek,portmap = "llllw"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/PSG1208.dts b/target/linux/ramips/dts/PSG1208.dts deleted file mode 100644 index 564b083f82..0000000000 --- a/target/linux/ramips/dts/PSG1208.dts +++ /dev/null @@ -1,123 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "phicomm,psg1208", "ralink,mt7620a-soc"; - model = "Phicomm PSG1208"; - - aliases { - led-boot = &led_wps; - led-failsafe = &led_wps; - led-running = &led_wps; - led-upgrade = &led_wps; - }; - - leds { - compatible = "gpio-leds"; - - led_wps: wps { - label = "psg1208:white:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "psg1208:white:wlan2g"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@20000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@30000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@40000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/PSG1218.dtsi b/target/linux/ramips/dts/PSG1218.dtsi deleted file mode 100644 index 33eabb6f78..0000000000 --- a/target/linux/ramips/dts/PSG1218.dtsi +++ /dev/null @@ -1,79 +0,0 @@ -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "phicomm,psg1218", "ralink,mt7620a-soc"; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@20000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@30000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@40000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/ramips/dts/PSG1218A.dts b/target/linux/ramips/dts/PSG1218A.dts deleted file mode 100644 index 2ae8871d89..0000000000 --- a/target/linux/ramips/dts/PSG1218A.dts +++ /dev/null @@ -1,55 +0,0 @@ -/dts-v1/; - -#include "PSG1218.dtsi" - -/ { - compatible = "phicomm,psg1218a", "phicomm,psg1218", "ralink,mt7620a-soc"; - model = "Phicomm PSG1218 rev.A"; - - aliases { - led-boot = &led_blue; - led-failsafe = &led_blue; - led-running = &led_blue; - led-upgrade = &led_blue; - }; - - leds { - compatible = "gpio-leds"; - led_blue: blue { - label = "psg1218a:blue:status"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - yellow { - label = "psg1218a:yellow:status"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - red { - label = "psg1218a:red:status"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x28>; - mediatek,portmap = "llllw"; -}; - -&wmac { - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; diff --git a/target/linux/ramips/dts/PSG1218B.dts b/target/linux/ramips/dts/PSG1218B.dts deleted file mode 100644 index f6445e8c44..0000000000 --- a/target/linux/ramips/dts/PSG1218B.dts +++ /dev/null @@ -1,50 +0,0 @@ -/dts-v1/; - -#include "PSG1218.dtsi" - -/ { - compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc"; - model = "Phicomm PSG1218 rev.B"; - - aliases { - led-boot = &led_blue; - led-failsafe = &led_blue; - led-running = &led_blue; - led-upgrade = &led_blue; - }; - - leds { - compatible = "gpio-leds"; - led_blue: blue { - label = "psg1218b:blue:status"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - yellow { - label = "psg1218b:yellow:status"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - red { - label = "psg1218b:red:status"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x28>; - mediatek,portmap = "llllw"; -}; diff --git a/target/linux/ramips/dts/RP-N53.dts b/target/linux/ramips/dts/RP-N53.dts deleted file mode 100644 index 2d2820ed79..0000000000 --- a/target/linux/ramips/dts/RP-N53.dts +++ /dev/null @@ -1,178 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "asus,rp-n53", "ralink,mt7620a-soc"; - model = "Asus RP-N53"; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - touch { - label = "touch"; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - audio { - label = "audio"; - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - backlight { - label = "rp-n53:white:back"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - wifi0 { - label = "rp-n53:blue:5g3"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - - wifi1 { - label = "rp-n53:blue:5g2"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - wifi2 { - label = "rp-n53:blue:5g1"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - - wifi3 { - label = "rp-n53:blue:wifi"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - }; - - wifi4 { - label = "rp-n53:blue:2g1"; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - - wifi5 { - label = "rp-n53:blue:2g2"; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; - - wifi6 { - label = "rp-n53:blue:2g3"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&i2c { - status = "okay"; -}; - -&i2s { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pcm_i2s_pins>; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pcm { - status = "okay"; -}; - -&gdma { - status = "okay"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "mdio", "rgmii1"; - ralink,function = "gpio"; - }; - }; -}; - -&gsw { - mediatek,port4 = "ephy"; - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "pci1814,5592"; - reg = <0x0000 0 0 0 0>; - ralink,2ghz = <0>; - ralink,mtd-eeprom = <&factory 0x8000>; - }; -}; diff --git a/target/linux/ramips/dts/RT-AC51U.dts b/target/linux/ramips/dts/RT-AC51U.dts deleted file mode 100644 index 3e54ffdad2..0000000000 --- a/target/linux/ramips/dts/RT-AC51U.dts +++ /dev/null @@ -1,149 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "asus,rt-ac51u", "ralink,mt7620a-soc"; - model = "Asus RT-AC51U"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "rt-ac51u:blue:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "rt-ac51u:blue:usb"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - wifi { - label = "rt-ac51u:blue:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - enable-leds { - gpio-export,name = "enable-leds"; - gpio-export,output = <1>; - gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -ðernet { - status = "okay"; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "wled", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - }; -}; diff --git a/target/linux/ramips/dts/RT-N12-PLUS.dts b/target/linux/ramips/dts/RT-N12-PLUS.dts deleted file mode 100644 index 83a7b6adf0..0000000000 --- a/target/linux/ramips/dts/RT-N12-PLUS.dts +++ /dev/null @@ -1,127 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "asus,rt-n12p", "ralink,mt7620n-soc"; - model = "Asus RT-N12+"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "rt-n12p:green:wan"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "rt-n12p:green:lan"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "rt-n12p:green:power"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - }; - - air { - label = "rt-n12p:green:air"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/RT-N14U.dts b/target/linux/ramips/dts/RT-N14U.dts deleted file mode 100644 index 834eb0ddf3..0000000000 --- a/target/linux/ramips/dts/RT-N14U.dts +++ /dev/null @@ -1,140 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "asus,rt-n14u", "ralink,mt7620n-soc"; - model = "Asus RT-N14U"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "rt-n14u:blue:wan"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "rt-n14u:blue:lan"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "rt-n14u:blue:usb"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - led_power: power { - label = "rt-n14u:blue:power"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - }; - - air { - label = "rt-n14u:blue:air"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "ephy", "wled", "i2c"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/TINY-AC.dts b/target/linux/ramips/dts/TINY-AC.dts deleted file mode 100644 index e36af1dc7f..0000000000 --- a/target/linux/ramips/dts/TINY-AC.dts +++ /dev/null @@ -1,171 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "dovado,tiny-ac", "ralink,mt7620a-soc"; - model = "Dovado Tiny AC"; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - leds { - compatible = "gpio-leds"; - - usb { - label = "tiny-ac:green:usb"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - wifi { - label = "tiny-ac:orange:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usbpower { - gpio-export,name = "usbpower"; - gpio-export,output = <1>; - gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - mediatek,portmap = "llllw"; - - port@4 { - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&phy4>; - }; - - port@5 { - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - - mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&pcie { - status = "okay"; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "uartf", "nd_sd", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; diff --git a/target/linux/ramips/dts/TUBE-E4G.dts b/target/linux/ramips/dts/TUBE-E4G.dts deleted file mode 100644 index 4097dc6140..0000000000 --- a/target/linux/ramips/dts/TUBE-E4G.dts +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "alfa-network,tube-e4g", "ralink,mt7620a-soc"; - model = "ALFA Network Tube-E4G"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - modem-enable { - gpio-export,name = "modem-enable"; - gpio-export,output = <1>; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - modem-rf-enable { - gpio-export,name = "modem-rf-enable"; - gpio-export,output = <1>; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - - sim-select { - gpio-export,name = "sim-select"; - gpio-export,output = <0>; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - - sim1-detect { - gpio-export,name = "sim1-detect"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - - sim2-detect { - gpio-export,name = "sim2-detect"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - - 4g { - label = "tube-e4g:green:4g"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "tube-e4g:blue:lan"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - - power: power { - label = "tube-e4g:green:power"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - sim1 { - label = "tube-e4g:green:sim1"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - sim2 { - label = "tube-e4g:green:sim2"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&ohci { - status = "okay"; -}; - -&pcie { - status = "disabled"; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "ephy", "nd_sd", "pcie", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x1000>; - }; - - partition@31000 { - label = "config"; - reg = <0x31000 0xf000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&wmac { - status = "disabled"; -}; diff --git a/target/linux/ramips/dts/U25AWF-H1.dts b/target/linux/ramips/dts/U25AWF-H1.dts deleted file mode 100644 index 4b4d0b6356..0000000000 --- a/target/linux/ramips/dts/U25AWF-H1.dts +++ /dev/null @@ -1,116 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/{ - compatible = "kimax,u25awf-h1","ralink,mt7620a-soc"; - model = "Kimax U25AWF-H1"; - - aliases { - led-boot = &led_wifi; - led-failsafe = &led_wifi; - led-running = &led_wifi; - led-upgrade = &led_wifi; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_wifi: wifi { - label = "u25awf:red:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "u25awf:green:lan"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "uartf", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/U35WF.dts b/target/linux/ramips/dts/U35WF.dts deleted file mode 100644 index d058b83949..0000000000 --- a/target/linux/ramips/dts/U35WF.dts +++ /dev/null @@ -1,116 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "kimax,u35wf","ralink,mt7620n-soc"; - model = "Kimax U35WF"; - - aliases { - led-boot = &led_wifi; - led-failsafe = &led_wifi; - led-running = &led_wifi; - led-upgrade = &led_wifi; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_wifi: wifi { - label = "u35wf:blue:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "u35wf:green:eth"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/VAR11N-300.dts b/target/linux/ramips/dts/VAR11N-300.dts deleted file mode 100644 index cf4b7c54a1..0000000000 --- a/target/linux/ramips/dts/VAR11N-300.dts +++ /dev/null @@ -1,100 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "vonets,var11n-300", "ralink,mt7620n-soc"; - model = "Vonets VAR11N-300"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - leds { - compatible = "gpio-leds"; - - led_system: system { - label = "var11n-300:blue:system"; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x3b0000>; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/WD03.dts b/target/linux/ramips/dts/WD03.dts deleted file mode 100644 index bbb2ca3dc9..0000000000 --- a/target/linux/ramips/dts/WD03.dts +++ /dev/null @@ -1,119 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "ravpower,wd03", "ralink,mt7620n-soc"; - model = "Ravpower WD03"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - green-wifi { - label = "wd03:green:wifi"; - gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; - }; - - - blue-wifi { - label = "wd03:blue:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&i2c { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4000>; - ralink,port-map = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "wled", "ephy"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/WE1026-5G-16M.dts b/target/linux/ramips/dts/WE1026-5G-16M.dts deleted file mode 100644 index 8954006ece..0000000000 --- a/target/linux/ramips/dts/WE1026-5G-16M.dts +++ /dev/null @@ -1,81 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2017 Kristian Evensen . - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -#include "WE1026-5G.dtsi" - -/ { - compatible = "zbtlink,we1026-5g-16m", "ralink,mt7620a-soc"; - model = "ZBT WE1026-5G (16M)"; -}; - -&spi0 { - status = "okay"; - - en25q128@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - firmware: partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; diff --git a/target/linux/ramips/dts/WE1026-5G.dtsi b/target/linux/ramips/dts/WE1026-5G.dtsi deleted file mode 100644 index e7e64e251a..0000000000 --- a/target/linux/ramips/dts/WE1026-5G.dtsi +++ /dev/null @@ -1,125 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2017 Kristian Evensen . - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "zbtlink,we1026-5g", "ralink,mt7620a-soc"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - lan { - label = "we1026-5g:green:lan"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "we1026-5g:green:usb"; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - wifi { - label = "we1026-5g:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "spi refclk", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "pci14c3,7662"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts deleted file mode 100644 index 9a6ca335a8..0000000000 --- a/target/linux/ramips/dts/WHR-1166D.dts +++ /dev/null @@ -1,182 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc"; - model = "Buffalo WHR-1166D"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - leds { - compatible = "gpio-leds"; - - power { - label = "whr-1166d:red:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "whr-1166d:green:wifi"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - - led_power_green: power2 { - label = "whr-1166d:green:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - wifi2 { - label = "whr-1166d:orange:wifi"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - internet { - label = "whr-1166d:green:internet"; - gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; - }; - - router { - label = "whr-1166d:orange:router"; - gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; - }; - - router2 { - label = "whr-1166d:green:router"; - gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - aoss { - label = "aoss"; - gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ap { - label = "ap"; - gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - bridge { - label = "bridge"; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "wled", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &mdio_pins>; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii-rxid"; - }; - }; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "pci0,0"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; diff --git a/target/linux/ramips/dts/WHR-300HP2.dts b/target/linux/ramips/dts/WHR-300HP2.dts deleted file mode 100644 index 8a79d6ab05..0000000000 --- a/target/linux/ramips/dts/WHR-300HP2.dts +++ /dev/null @@ -1,157 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc"; - model = "Buffalo WHR-300HP2"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - leds { - compatible = "gpio-leds"; - - power { - label = "whr-300hp2:red:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "whr-300hp2:green:wifi"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - - led_power_green: power2 { - label = "whr-300hp2:green:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - wifi2 { - label = "whr-300hp2:orange:wifi"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - internet { - label = "whr-300hp2:green:internet"; - gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; - }; - - router { - label = "whr-300hp2:green:router"; - gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; - }; - - router2 { - label = "whr-300hp2:orange:router"; - gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - aoss { - label = "aoss"; - gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ap { - label = "ap"; - gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - bridge { - label = "bridge"; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mediatek,portmap = "llllw"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; diff --git a/target/linux/ramips/dts/WHR-600D.dts b/target/linux/ramips/dts/WHR-600D.dts deleted file mode 100644 index f4b5661eac..0000000000 --- a/target/linux/ramips/dts/WHR-600D.dts +++ /dev/null @@ -1,168 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "buffalo,whr-600d", "ralink,mt7620a-soc"; - model = "Buffalo WHR-600D"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - leds { - compatible = "gpio-leds"; - - power { - label = "whr-600d:red:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "whr-600d:green:wifi"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - - led_power_green: power2 { - label = "whr-600d:green:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - wifi2 { - label = "whr-600d:orange:wifi"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - internet { - label = "whr-600d:green:internet"; - gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; - }; - - router { - label = "whr-600d:green:router"; - gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; - }; - - router2 { - label = "whr-600d:orange:router"; - gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - aoss { - label = "aoss"; - gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ap { - label = "ap"; - gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - bridge { - label = "bridge"; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "pci1814,5592"; - reg = <0x0000 0 0 0 0>; - ralink,mtd-eeprom = <&factory 0x8000>; - }; -}; diff --git a/target/linux/ramips/dts/WMR-300.dts b/target/linux/ramips/dts/WMR-300.dts deleted file mode 100644 index f0f1cc1337..0000000000 --- a/target/linux/ramips/dts/WMR-300.dts +++ /dev/null @@ -1,116 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "buffalo,wmr-300", "ralink,mt7620n-soc"; - model = "Buffalo WMR-300"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - leds { - compatible = "gpio-leds"; - - aoss1 { - label = "wmr-300:red:aoss"; - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - - aoss2 { - label = "wmr-300:green:aoss"; - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - }; - - led_status: status { - label = "wmr-300:green:status"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - aoss { - label = "aoss"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "ephy"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/WN-AC1167GR.dts b/target/linux/ramips/dts/WN-AC1167GR.dts deleted file mode 100644 index 14c851a3a8..0000000000 --- a/target/linux/ramips/dts/WN-AC1167GR.dts +++ /dev/null @@ -1,216 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc"; - model = "I-O DATA WN-AC1167GR"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "wn-ac1167gr:green:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - wlan2g { - label = "wn-ac1167gr:green:wlan2g"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - notification { - label = "wn-ac1167gr:green:notification"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - wlan5g { - label = "wn-ac1167gr:green:wlan5g"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - auto { - label = "auto"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - Factory: partition@40000 { - label = "Factory"; - reg = <0x40000 0x8000>; - read-only; - }; - - iNIC_rf: partition@48000 { - label = "iNIC_rf"; - reg = <0x48000 0x8000>; - read-only; - }; - - partition@50000 { - label = "NoUsed"; - reg = <0x50000 0x20000>; - read-only; - }; - - partition@70000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x70000 0x6b4000>; - }; - - partition@724000 { - label = "manufacture"; - reg = <0x724000 0x8c000>; - read-only; - }; - - partition@7b0000 { - label = "backup"; - reg = <0x7b0000 0x10000>; - read-only; - }; - - partition@7c0000 { - label = "storage"; - reg = <0x7c0000 0x40000>; - read-only; - }; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &mdio_pins>; - mtd-mac-address = <&Factory 0x4>; - - port@5 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - }; - - mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - - ethernet-phy@2 { - reg = <2>; - phy-mode = "rgmii"; - }; - - ethernet-phy@3 { - reg = <3>; - phy-mode = "rgmii"; - }; - - ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - ethernet-phy@1f { - reg = <0x1f>; - phy-mode = "rgmii"; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&iNIC_rf 0x0>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&wmac { - ralink,mtd-eeprom = <&Factory 0x0>; -}; diff --git a/target/linux/ramips/dts/WN-AC733GR3.dts b/target/linux/ramips/dts/WN-AC733GR3.dts deleted file mode 100644 index ea837c4d34..0000000000 --- a/target/linux/ramips/dts/WN-AC733GR3.dts +++ /dev/null @@ -1,198 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "iodata,wn-ac733gr3", "ralink,mt7620a-soc"; - model = "I-O DATA WN-AC733GR3"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "wn-ac733gr3:green:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - notification { - label = "wn-ac733gr3:green:notification"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "wn-ac733gr3:green:wlan2g"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - wlan5g { - label = "wn-ac733gr3:green:wlan5g"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - router { - label = "router"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - auto { - label = "auto"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; - - rtl8367rb { - compatible = "realtek,rtl8367b"; - gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>; - gpio-sck = <&gpio0 23 GPIO_ACTIVE_HIGH>; - realtek,extif1 = <1 0 1 1 1 1 1 1 2>; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - Factory: partition@40000 { - label = "Factory"; - reg = <0x40000 0x8000>; - read-only; - }; - - iNIC_rf: partition@48000 { - label = "iNIC_rf"; - reg = <0x48000 0x8000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x6d4000>; - }; - - partition@724000 { - label = "manufacture"; - reg = <0x724000 0x8c000>; - read-only; - }; - - partition@7b0000 { - label = "backup"; - reg = <0x7b0000 0x10000>; - read-only; - }; - - partition@7c0000 { - label = "storage"; - reg = <0x7c0000 0x40000>; - read-only; - }; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins>; - mtd-mac-address = <&Factory 0x4>; - - port@5 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - }; -}; - -&gpio0 { - rtl8367rb_reset { - gpio-hog; - gpios = <0 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "rtl8367rb-reset"; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "mdio"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&iNIC_rf 0x0>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&wmac { - ralink,mtd-eeprom = <&Factory 0x0>; -}; diff --git a/target/linux/ramips/dts/WN3000RPV3.dts b/target/linux/ramips/dts/WN3000RPV3.dts deleted file mode 100644 index b067a4e448..0000000000 --- a/target/linux/ramips/dts/WN3000RPV3.dts +++ /dev/null @@ -1,153 +0,0 @@ -/* This file is released into the public domain */ - -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc"; - model = "Netgear WN3000RPv3"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - leds { - compatible = "gpio-leds"; - - led_power_green: power_g { - label = "wn3000rpv3:green:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - power_r { - label = "wn3000rpv3:red:power"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - client_g { - label = "wn3000rpv3:green:client"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - - client_r { - label = "wn3000rpv3:red:client"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - router_g { - label = "wn3000rpv3:green:router"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - router_r { - label = "wn3000rpv3:red:router"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "wn3000rpv3:green:wps"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - l_arrow { - label = "wn3000rpv3:blue:leftarrow"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - - r_arrow { - label = "wn3000rpv3:blue:rightarrow"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@40000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x40000 0x7b0000>; - }; - - art: partition@7f0000 { - label = "art"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&art 0x0>; -}; - -&wmac { - mtd-mac-address = <&art 0x6>; - ralink,mtd-eeprom = <&art 0x1000>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "spi refclk"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/WRH-300CR.dts b/target/linux/ramips/dts/WRH-300CR.dts deleted file mode 100644 index eb6dbe6d1a..0000000000 --- a/target/linux/ramips/dts/WRH-300CR.dts +++ /dev/null @@ -1,137 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc"; - model = "ELECOM WRH-300CR"; - - aliases { - led-boot = &led_wps; - led-failsafe = &led_wps; - led-running = &led_wps; - led-upgrade = &led_wps; - }; - - leds { - compatible = "gpio-leds"; - - led_wps: wps { - label = "wrh-300cr:green:wps"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - ethernet { - label = "wrh-300cr:green:ethernet"; - gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "wrh-300cr:green:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "recover"; - reg = <0x50000 0x1c0000>; - read-only; - }; - - partition@210000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x210000 0xdf0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x2e>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/WRTNODE.dts b/target/linux/ramips/dts/WRTNODE.dts deleted file mode 100644 index a808818201..0000000000 --- a/target/linux/ramips/dts/WRTNODE.dts +++ /dev/null @@ -1,104 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include - -/ { - compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc"; - model = "WRTNODE"; - - aliases { - led-boot = &led_indicator; - led-failsafe = &led_indicator; - led-running = &led_indicator; - led-upgrade = &led_indicator; - }; - - leds { - compatible = "gpio-leds"; - - led_indicator: indicator { - label = "wrtnode:blue:indicator"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/WT3020-4M.dts b/target/linux/ramips/dts/WT3020-4M.dts deleted file mode 100644 index 4bdc3bd6ba..0000000000 --- a/target/linux/ramips/dts/WT3020-4M.dts +++ /dev/null @@ -1,48 +0,0 @@ -/dts-v1/; - -#include "WT3020.dtsi" - -/ { - compatible = "nexx,wt3020-4m", "nexx,wt3020", "ralink,mt7620n-soc"; - model = "Nexx WT3020 (4M)"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x3b0000>; - }; - }; - }; -}; diff --git a/target/linux/ramips/dts/WT3020-8M.dts b/target/linux/ramips/dts/WT3020-8M.dts deleted file mode 100644 index be429f0c2b..0000000000 --- a/target/linux/ramips/dts/WT3020-8M.dts +++ /dev/null @@ -1,56 +0,0 @@ -/dts-v1/; - -#include "WT3020.dtsi" - -/ { - compatible = "nexx,wt3020-8m", "nexx,wt3020", "ralink,mt7620n-soc"; - model = "Nexx WT3020 (8M)"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; diff --git a/target/linux/ramips/dts/WT3020.dtsi b/target/linux/ramips/dts/WT3020.dtsi deleted file mode 100644 index 59558a2e96..0000000000 --- a/target/linux/ramips/dts/WT3020.dtsi +++ /dev/null @@ -1,61 +0,0 @@ -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "nexx,wt3020", "ralink,mt7620n-soc"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "wt3020:blue:power"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/Y1.dts b/target/linux/ramips/dts/Y1.dts deleted file mode 100644 index 87eb1bf4c5..0000000000 --- a/target/linux/ramips/dts/Y1.dts +++ /dev/null @@ -1,58 +0,0 @@ -/dts-v1/; - -#include "Y1.dtsi" - -/ { - compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc"; - model = "Lenovo Y1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "y1:blue:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - wlan1 { - label = "y1:blue:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - wlan2 { - label = "y1:blue:wifi5g"; - gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "y1:blue:usb"; - gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - lan { - label = "y1:blue:lan"; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - }; - - internet { - label = "y1:blue:internet"; - gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; diff --git a/target/linux/ramips/dts/Y1.dtsi b/target/linux/ramips/dts/Y1.dtsi deleted file mode 100644 index 5d6c9922fd..0000000000 --- a/target/linux/ramips/dts/Y1.dtsi +++ /dev/null @@ -1,110 +0,0 @@ -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "uartf", "wled", "nd_sd"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/Y1S.dts b/target/linux/ramips/dts/Y1S.dts deleted file mode 100644 index 6cdf0b5cdc..0000000000 --- a/target/linux/ramips/dts/Y1S.dts +++ /dev/null @@ -1,115 +0,0 @@ -/dts-v1/; - -#include "Y1.dtsi" - -/ { - compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc"; - model = "Lenovo Y1S"; - - aliases { - led-boot = &led_power_blue; - led-failsafe = &led_power_blue; - led-running = &led_power_blue; - led-upgrade = &led_power_blue; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb0 { - gpio-export,name = "usb0"; - gpio-export,output = <1>; - gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; - }; - usb1 { - gpio-export,name = "usb1"; - gpio-export,output = <1>; - gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - }; - usb2 { - gpio-export,name = "usb2"; - gpio-export,output = <1>; - gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power1 { - label = "y1s:yellow:power"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - led_power_blue: power2 { - label = "y1s:blue:power"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - wlan1 { - label = "y1s:yellow:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - wlan2 { - label = "y1s:blue:wifi"; - gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; - }; - - usb1 { - label = "y1s:yellow:usb"; - gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - }; - - usb2 { - label = "y1s:blue:usb"; - gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - internet { - label = "y1s:blue:internet"; - gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - }; - }; -}; - -ðernet { - status = "okay"; - mtd-mac-address = <&factory 0x4>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; - mediatek,portmap = "wllll"; - - port@4 { - status = "okay"; - phy-handle = <&phy4>; - phy-mode = "rgmii"; - }; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; diff --git a/target/linux/ramips/dts/YOUKU-YK1.dts b/target/linux/ramips/dts/YOUKU-YK1.dts deleted file mode 100644 index 5d90b17a04..0000000000 --- a/target/linux/ramips/dts/YOUKU-YK1.dts +++ /dev/null @@ -1,138 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "youku,yk1", "ralink,mt7620a-soc"; - model = "YOUKU YK1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - wan { - label = "youku-yk1:blue:wan"; - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - }; - air { - label = "youku-yk1:blue:air"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - usb { - label = "youku-yk1:blue:usb"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - led_power: power { - label = "youku-yk1:blue:power"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "mx25l25635f", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x1fb0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "rgmii1", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/ZBT-APE522II.dts b/target/linux/ramips/dts/ZBT-APE522II.dts deleted file mode 100644 index 70ad0f0b58..0000000000 --- a/target/linux/ramips/dts/ZBT-APE522II.dts +++ /dev/null @@ -1,144 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc"; - model = "ZBT-APE522II"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - sys1 { - label = "zbt-ape522ii:green:sys1"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - sys2 { - label = "zbt-ape522ii:green:sys2"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - sys3 { - label = "zbt-ape522ii:green:sys3"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - sys4 { - label = "zbt-ape522ii:green:sys4"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - wlan2g4 { - label = "zbt-ape522ii:green:wlan2g4"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xf80000>; - }; - }; - }; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "wled", "i2c", "uartf", "wdt"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZBT-CPE102.dts b/target/linux/ramips/dts/ZBT-CPE102.dts deleted file mode 100644 index 6f0213bf70..0000000000 --- a/target/linux/ramips/dts/ZBT-CPE102.dts +++ /dev/null @@ -1,129 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc"; - model = "Zbtlink ZBT-CPE102"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - - aliases { - led-boot = &led_4g_0; - led-failsafe = &led_4g_0; - }; - - leds { - compatible = "gpio-leds"; - - led_4g_0: 4g-0 { - label = "zbt-cpe102:green:4g-0"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - 4g-1 { - label = "zbt-cpe102:green:4g-1"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - }; - - 4g-2 { - label = "zbt-cpe102:green:4g-2"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - en25q64@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x760000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZBT-WA05.dts b/target/linux/ramips/dts/ZBT-WA05.dts deleted file mode 100644 index 21b56dcae1..0000000000 --- a/target/linux/ramips/dts/ZBT-WA05.dts +++ /dev/null @@ -1,132 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc"; - model = "Zbtlink ZBT-WA05"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "zbt-wa05:blue:power"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "zbt-wa05:blue:usb"; - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - air { - label = "zbt-wa05:blue:air"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - en25q64@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x760000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZBT-WE2026.dts b/target/linux/ramips/dts/ZBT-WE2026.dts deleted file mode 100644 index be8d13be90..0000000000 --- a/target/linux/ramips/dts/ZBT-WE2026.dts +++ /dev/null @@ -1,113 +0,0 @@ -/dts-v1/; - -#include -#include - -#include "mt7620n.dtsi" - -/ { - compatible = "zbtlink,zbt-we2026", "ralink,mt7620n-soc"; - model = "Zbtlink ZBT-WE2026"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "zbt-we2026:red:power"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "zbt-we2026:green:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - en25q64@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x760000>; - }; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZBT-WE826-16M.dts b/target/linux/ramips/dts/ZBT-WE826-16M.dts deleted file mode 100644 index c33a11ecb7..0000000000 --- a/target/linux/ramips/dts/ZBT-WE826-16M.dts +++ /dev/null @@ -1,48 +0,0 @@ -/dts-v1/; - -#include "ZBT-WE826.dtsi" - -/ { - compatible = "zbtlink,zbt-we826-16m", "zbtlink,zbt-we826", "ralink,mt7620a-soc"; - model = "ZBT-WE826 (16M)"; -}; - -&spi0 { - status = "okay"; - - en25q128@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - firmware: partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZBT-WE826-32M.dts b/target/linux/ramips/dts/ZBT-WE826-32M.dts deleted file mode 100644 index 9c8f3708d1..0000000000 --- a/target/linux/ramips/dts/ZBT-WE826-32M.dts +++ /dev/null @@ -1,48 +0,0 @@ -/dts-v1/; - -#include "ZBT-WE826.dtsi" - -/ { - compatible = "zbtlink,zbt-we826-32m", "zbtlink,zbt-we826", "ralink,mt7620a-soc"; - model = "ZBT-WE826 (32M)"; -}; - -&spi0 { - status = "okay"; - - en25q128@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - firmware: partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x1fb0000>; - }; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZBT-WE826-E.dts b/target/linux/ramips/dts/ZBT-WE826-E.dts deleted file mode 100644 index ce97b03715..0000000000 --- a/target/linux/ramips/dts/ZBT-WE826-E.dts +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ZBT-WE826.dtsi" - -/ { - compatible = "zbtlink,zbt-we826-e", "zbtlink,zbt-we826", "ralink,mt7620a-soc"; - model = "ZBT-WE826-E"; - - /delete-node/ leds; - - leds { - compatible = "gpio-leds"; - - led_power: gsm { - label = "zbt-we826-e:blue:gsm"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - - signal { - label = "zbt-we826-e:green:signal"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - sim { - label = "zbt-we826-e:red:sim"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - air { - label = "zbt-we826-e:red:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - firmware: partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x1fb0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZBT-WE826.dtsi b/target/linux/ramips/dts/ZBT-WE826.dtsi deleted file mode 100644 index 0776ea7a79..0000000000 --- a/target/linux/ramips/dts/ZBT-WE826.dtsi +++ /dev/null @@ -1,93 +0,0 @@ -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - led_power: power { - label = "zbt-we826:green:power"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - usb { - label = "zbt-we826:green:usb"; - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - air { - label = "zbt-we826:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/ZBT-WR8305RT.dts b/target/linux/ramips/dts/ZBT-WR8305RT.dts deleted file mode 100644 index 5292c70dbb..0000000000 --- a/target/linux/ramips/dts/ZBT-WR8305RT.dts +++ /dev/null @@ -1,126 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc"; - model = "Zbtlink ZBT-WR8305RT"; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - leds { - compatible = "gpio-leds"; - - led_sys: sys { - label = "zbt-wr8305rt:green:sys"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "zbt-wr8305rt:green:usb"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - wifi { - label = "zbt-wr8305rt:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZTE-Q7.dts b/target/linux/ramips/dts/ZTE-Q7.dts deleted file mode 100644 index 5b4c5ee047..0000000000 --- a/target/linux/ramips/dts/ZTE-Q7.dts +++ /dev/null @@ -1,125 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "zte,q7", "ralink,mt7620a-soc"; - model = "ZTE Q7"; - - aliases { - led-boot = &led_status_blue; - led-failsafe = &led_status_blue; - led-running = &led_status_blue; - led-upgrade = &led_status_blue; - }; - - leds { - compatible = "gpio-leds"; - - statred { - label = "zte-q7:red:status"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - - led_status_blue: statblue { - label = "zte-q7:blue:status"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -&gsw { - mediatek,port4 = "ephy"; -}; diff --git a/target/linux/ramips/dts/kn_rc.dts b/target/linux/ramips/dts/kn_rc.dts deleted file mode 100644 index 74396d1fc2..0000000000 --- a/target/linux/ramips/dts/kn_rc.dts +++ /dev/null @@ -1,152 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc"; - model = "ZyXEL Keenetic Omni"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "kn_rc:green:wan"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "kn_rc:green:usb"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - wifi { - label = "kn_rc:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "kn_rc:green:power"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - fn { - label = "fn"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb_power { - gpio-export,name = "usb"; - gpio-export,output = <1>; - gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/kn_rf.dts b/target/linux/ramips/dts/kn_rf.dts deleted file mode 100644 index 765629548c..0000000000 --- a/target/linux/ramips/dts/kn_rf.dts +++ /dev/null @@ -1,152 +0,0 @@ -/dts-v1/; - -#include "mt7620n.dtsi" - -#include -#include - -/ { - compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc"; - model = "ZyXEL Keenetic Omni II"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "kn_rc:green:wan"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "kn_rc:green:usb"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - wifi { - label = "kn_rc:green:wifi"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "kn_rc:green:power"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - fn { - label = "fn"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb_power { - gpio-export,name = "usb"; - gpio-export,output = <1>; - gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/kng_rc.dts b/target/linux/ramips/dts/kng_rc.dts deleted file mode 100644 index 3d6d2c6f06..0000000000 --- a/target/linux/ramips/dts/kng_rc.dts +++ /dev/null @@ -1,178 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc"; - model = "ZyXEL Keenetic Viva"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - leds { - compatible = "gpio-leds"; - - wan { - label = "kng_rc:green:wan"; - gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - }; - - usb { - label = "kng_rc:green:usb"; - gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - power_alert { - label = "kng_rc:red:power"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - wifi { - label = "kng_rc:green:wifi"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - led_power_green: power { - label = "kng_rc:green:power"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - fn { - label = "fn"; - gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb_power { - gpio-export,name = "usb"; - gpio-export,output = <1>; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - }; - - rtl8367rb { - compatible = "realtek,rtl8367b"; - cpu_port = <7>; - realtek,extif2 = <1 0 1 1 1 1 1 1 2>; - mii-bus = <&mdio0>; - }; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "uartf"; - ralink,function = "gpio"; - }; - }; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii2_pins &mdio_pins>; - mtd-mac-address = <&factory 0x00004>; - - port@4 { - status = "okay"; - mediatek,fixed-link = <1000 1 1 1>; - phy-mode = "rgmii"; - phy-handle = <&phy4>; - }; - - mdio0: mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/mt7620a_aigale_ai-br100.dts b/target/linux/ramips/dts/mt7620a_aigale_ai-br100.dts new file mode 100644 index 0000000000..8de4b5877a --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_aigale_ai-br100.dts @@ -0,0 +1,117 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "aigale,ai-br100", "ralink,mt7620a-soc"; + model = "Aigale Ai-BR100"; + + aliases { + led-boot = &led_wlan; + led-failsafe = &led_wlan; + led-running = &led_wlan; + led-upgrade = &led_wlan; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "ai-br100:blue:wan"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + led_wlan: wlan { + label = "ai-br100:blue:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0 0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x20000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x40000 0x7c0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_alfa-network_ac1200rm.dts b/target/linux/ramips/dts/mt7620a_alfa-network_ac1200rm.dts new file mode 100644 index 0000000000..388b088d92 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_alfa-network_ac1200rm.dts @@ -0,0 +1,183 @@ +/* + * BSD LICENSE + * + * Copyright (C) 2018 Piotr Dymacz + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the names of the copyright holders nor the names of any + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "alfa-network,ac1200rm", "ralink,mt7620a-soc"; + model = "ALFA Network AC1200RM"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + wlan2g { + label = "ac1200rm:green:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + led_wps: wps { + label = "ac1200rm:green:wps"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "nd_sd", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x1000>; + }; + + partition@31000 { + label = "config"; + reg = <0x31000 0xf000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_alfa-network_tube-e4g.dts b/target/linux/ramips/dts/mt7620a_alfa-network_tube-e4g.dts new file mode 100644 index 0000000000..4097dc6140 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_alfa-network_tube-e4g.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "alfa-network,tube-e4g", "ralink,mt7620a-soc"; + model = "ALFA Network Tube-E4G"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + modem-enable { + gpio-export,name = "modem-enable"; + gpio-export,output = <1>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + modem-rf-enable { + gpio-export,name = "modem-rf-enable"; + gpio-export,output = <1>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + + sim-select { + gpio-export,name = "sim-select"; + gpio-export,output = <0>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + sim1-detect { + gpio-export,name = "sim1-detect"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + + sim2-detect { + gpio-export,name = "sim2-detect"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + 4g { + label = "tube-e4g:green:4g"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "tube-e4g:blue:lan"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + power: power { + label = "tube-e4g:green:power"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + sim1 { + label = "tube-e4g:green:sim1"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + sim2 { + label = "tube-e4g:green:sim2"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "disabled"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "ephy", "nd_sd", "pcie", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x1000>; + }; + + partition@31000 { + label = "config"; + reg = <0x31000 0xf000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&wmac { + status = "disabled"; +}; diff --git a/target/linux/ramips/dts/mt7620a_asus_rp-n53.dts b/target/linux/ramips/dts/mt7620a_asus_rp-n53.dts new file mode 100644 index 0000000000..2d2820ed79 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_asus_rp-n53.dts @@ -0,0 +1,178 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "asus,rp-n53", "ralink,mt7620a-soc"; + model = "Asus RP-N53"; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + touch { + label = "touch"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + audio { + label = "audio"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + backlight { + label = "rp-n53:white:back"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + wifi0 { + label = "rp-n53:blue:5g3"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + wifi1 { + label = "rp-n53:blue:5g2"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + wifi2 { + label = "rp-n53:blue:5g1"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + wifi3 { + label = "rp-n53:blue:wifi"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + wifi4 { + label = "rp-n53:blue:2g1"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + wifi5 { + label = "rp-n53:blue:2g2"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + wifi6 { + label = "rp-n53:blue:2g3"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c { + status = "okay"; +}; + +&i2s { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pcm_i2s_pins>; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pcm { + status = "okay"; +}; + +&gdma { + status = "okay"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "mdio", "rgmii1"; + ralink,function = "gpio"; + }; + }; +}; + +&gsw { + mediatek,port4 = "ephy"; + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci1814,5592"; + reg = <0x0000 0 0 0 0>; + ralink,2ghz = <0>; + ralink,mtd-eeprom = <&factory 0x8000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts b/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts new file mode 100644 index 0000000000..3e54ffdad2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts @@ -0,0 +1,149 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "asus,rt-ac51u", "ralink,mt7620a-soc"; + model = "Asus RT-AC51U"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "rt-ac51u:blue:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "rt-ac51u:blue:usb"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wifi { + label = "rt-ac51u:blue:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + enable-leds { + gpio-export,name = "enable-leds"; + gpio-export,output = <1>; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +ðernet { + status = "okay"; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "wled", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_bdcom_wap2100-sk.dts b/target/linux/ramips/dts/mt7620a_bdcom_wap2100-sk.dts new file mode 100644 index 0000000000..e71d14c6ab --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_bdcom_wap2100-sk.dts @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "bdcom,wap2100-sk", "ralink,mt7620a-soc"; + model = "BDCOM WAP2100-SK"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "wap2100-sk:green:usb"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led_power: wps { + label = "wap2100-sk:green:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "wap2100-sk:green:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf70000>; + }; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "spi refclk", "uartf", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts b/target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts new file mode 100644 index 0000000000..9a6ca335a8 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_buffalo_whr-1166d.dts @@ -0,0 +1,182 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc"; + model = "Buffalo WHR-1166D"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "whr-1166d:red:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "whr-1166d:green:wifi"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + led_power_green: power2 { + label = "whr-1166d:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + wifi2 { + label = "whr-1166d:orange:wifi"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "whr-1166d:green:internet"; + gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; + }; + + router { + label = "whr-1166d:orange:router"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; + }; + + router2 { + label = "whr-1166d:green:router"; + gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + aoss { + label = "aoss"; + gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ap { + label = "ap"; + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + bridge { + label = "bridge"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii-rxid"; + }; + }; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts b/target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts new file mode 100644 index 0000000000..8a79d6ab05 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_buffalo_whr-300hp2.dts @@ -0,0 +1,157 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc"; + model = "Buffalo WHR-300HP2"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "whr-300hp2:red:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "whr-300hp2:green:wifi"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + led_power_green: power2 { + label = "whr-300hp2:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + wifi2 { + label = "whr-300hp2:orange:wifi"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "whr-300hp2:green:internet"; + gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; + }; + + router { + label = "whr-300hp2:green:router"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; + }; + + router2 { + label = "whr-300hp2:orange:router"; + gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + aoss { + label = "aoss"; + gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ap { + label = "ap"; + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + bridge { + label = "bridge"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mediatek,portmap = "llllw"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; diff --git a/target/linux/ramips/dts/mt7620a_buffalo_whr-600d.dts b/target/linux/ramips/dts/mt7620a_buffalo_whr-600d.dts new file mode 100644 index 0000000000..f4b5661eac --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_buffalo_whr-600d.dts @@ -0,0 +1,168 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "buffalo,whr-600d", "ralink,mt7620a-soc"; + model = "Buffalo WHR-600D"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "whr-600d:red:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "whr-600d:green:wifi"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + led_power_green: power2 { + label = "whr-600d:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + wifi2 { + label = "whr-600d:orange:wifi"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "whr-600d:green:internet"; + gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; + }; + + router { + label = "whr-600d:green:router"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; + }; + + router2 { + label = "whr-600d:orange:router"; + gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + aoss { + label = "aoss"; + gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ap { + label = "ap"; + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + bridge { + label = "bridge"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci1814,5592"; + reg = <0x0000 0 0 0 0>; + ralink,mtd-eeprom = <&factory 0x8000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_dlink_dch-m225.dts b/target/linux/ramips/dts/mt7620a_dlink_dch-m225.dts new file mode 100644 index 0000000000..0644378ba2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_dlink_dch-m225.dts @@ -0,0 +1,191 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "dlink,dch-m225", "ralink,mt7620a-soc"; + model = "D-Link DCH-M225"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "dch-m225:green:power"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + status { + label = "dch-m225:red:status"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Audio-I2S"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + simple-audio-card,widgets = + "Headphone", "Headphones"; + simple-audio-card,routing = + "Headphones", "HP_L", + "Headphones", "HP_R"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + + dailink0_master: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c { + status = "okay"; + + codec: wm8960@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8960"; + reg = <0x1a>; + + wlf,shared-lrclk; + }; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_refclk_pins>; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x4000>; + read-only; + }; + + factory: partition@34000 { + label = "factory"; + reg = <0x34000 0x4000>; + read-only; + }; + + nvram: partition@38000 { + label = "nvram"; + reg = <0x38000 0x8000>; + read-only; + }; + + partition@40000 { + label = "devconf"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "upgrade_rec"; + reg = <0x50000 0x100000>; + read-only; + }; + + partition@150000 { + compatible = "seama"; + label = "firmware"; + reg = <0x150000 0x6b0000>; + }; + }; + }; +}; + +&gdma { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii1"; + ralink,function = "gpio"; + }; + + gpio_i2s { + ralink,group = "uartf"; + ralink,function = "gpio i2s"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + +&gsw { + ralink,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-510l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-510l.dts new file mode 100644 index 0000000000..885e64f9f2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_dlink_dir-510l.dts @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "dlink,dir-510l", "ralink,mt7620a-soc"; + model = "D-Link DIR-510L"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + chosen { + bootargs = "console=ttyS1,57600"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status: status { + label = "dir-510l:green:status"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + + status-red { + label = "dir-510l:red:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + }; + + }; +}; + +ðernet { + mediatek,portmap = "llllw"; +}; + +&uart { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + label = "recovery"; + reg = <0x10000 0x200000>; + read-only; + }; + + partition@210000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x210000 0xde0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76x0e@0,0 { + reg = <0x0000 0 0 0 0>; + mtd-mac-address = <&config 0xe490>; + mtd-mac-address-increment = <(2)>; + mediatek,mtd-eeprom = <&config 0xe05d>; + }; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts new file mode 100644 index 0000000000..d728449a48 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts @@ -0,0 +1,154 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "dlink,dir-810l", "ralink,mt7620a-soc"; + model = "D-Link DIR-810L"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power { + label = "dir-810l:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "dir-810l:orange:wan"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + + power2 { + label = "dir-810l:orange:power"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + factory5g: partition@50000 { + label = "factory5g"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@60000 { + label = "Wolf_Config"; + reg = <0x60000 0x10000>; + read-only; + }; + + partition@70000 { + label = "MyDlink"; + reg = <0x70000 0x80000>; + read-only; + }; + + partition@e0000 { + label = "Jffs2"; + reg = <0xe0000 0x80000>; + read-only; + }; + + partition@170000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x170000 0x690000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; +}; + +&gsw { + mediatek,port4 = "ephy"; + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; +}; + +&pcie { + status = "okay"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a1.dts b/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a1.dts new file mode 100644 index 0000000000..707bc1c3d3 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a1.dts @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc"; + model = "D-Link DWR-118 A1"; + + aliases { + led-boot = &led_internet; + led-failsafe = &led_internet; + led-upgrade = &led_internet; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "dwr-118-a1:green:wan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + led_internet: internet { + label = "dwr-118-a1:green:internet"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "dwr-118-a1:green:lan"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "dwr-118-a1:green:wlan2g"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "dwr-118-a1:green:usb"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <0>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x10000 0xfe0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "uartf", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mtd-mac-address = <&config 0xe496>; + mtd-mac-address-increment = <(2)>; + mediatek,mtd-eeprom = <&config 0xe083>; + + led { + led-sources = <0>; + led-active-low; + }; + }; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + + port@4 { + status = "okay"; + phy-handle = <&phy4>; + phy-mode = "rgmii"; + }; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii-rxid"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii-rxid"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; diff --git a/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts b/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts new file mode 100644 index 0000000000..26b23aa6d1 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_dlink_dwr-118-a2.dts @@ -0,0 +1,183 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "dlink,dwr-118-a2", "ralink,mt7620a-soc"; + model = "D-Link DWR-118 A2"; + + aliases { + led-boot = &led_internet; + led-failsafe = &led_internet; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "dwr-118-a2:green:wan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + led_internet: internet { + label = "dwr-118-a2:green:internet"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "dwr-118-a2:green:lan"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "dwr-118-a2:green:wlan2g"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "dwr-118-a2:green:usb"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x10000 0xfe0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "uartf", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&config 0xe4a8>; + mtd-mac-address-increment = <(2)>; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +ðernet { + status = "okay"; + mediatek,portmap = "wllll"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + + port@4 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii-rxid"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; + mediatek,ephy-base-address = /bits/ 16 < 2 >; +}; diff --git a/target/linux/ramips/dts/mt7620a_dovado_tiny-ac.dts b/target/linux/ramips/dts/mt7620a_dovado_tiny-ac.dts new file mode 100644 index 0000000000..e36af1dc7f --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_dovado_tiny-ac.dts @@ -0,0 +1,171 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "dovado,tiny-ac", "ralink,mt7620a-soc"; + model = "Dovado Tiny AC"; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "tiny-ac:green:usb"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wifi { + label = "tiny-ac:orange:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <1>; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + mediatek,portmap = "llllw"; + + port@4 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy4>; + }; + + port@5 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&pcie { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uartf", "nd_sd", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_edimax_br-6478ac-v2.dts b/target/linux/ramips/dts/mt7620a_edimax_br-6478ac-v2.dts new file mode 100644 index 0000000000..5c90aa1549 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_edimax_br-6478ac-v2.dts @@ -0,0 +1,216 @@ +/* + * Device Tree file for the Edimax BR-6478AC V2 + * based on Linksys E1700 + * + * Copyright (C) 2016 Rohan Murch + * Copyright (C) 2016 Hans Ulli Kroll + * Copyright (C) 2017 James McKenzie + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "edimax,br-6478ac-v2", "ralink,mt7620a-soc"; + model = "Edimax BR-6478AC v2"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "br-6478ac-v2:white:power"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + internet { + label = "br-6478ac-v2:blue:internet"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + wlan { + label = "br-6478ac-v2:blue:wlan"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + usb { + label = "br-6478ac-v2:blue:usb"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; + + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + usb-power { + gpio-export,name="usb-power"; + gpio-export,output=<1>; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0 0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "cimage"; + reg = <0x50000 0x20000>; + read-only; + }; + + partition@70000 { + compatible = "edimax,uimage"; + label = "firmware"; + reg = <0x00070000 0x00790000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + status = "okay"; + mtd-mac-address = <&factory 0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + mediatek,portmap = "wllll"; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy1f: ethernet-phy@1f { + reg = <0x1f>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts b/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts new file mode 100644 index 0000000000..eb326ccbd8 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "mt7620a_edimax_ew-747x.dtsi" + +/ { + compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc"; + model = "Edimax EW-7476RPC"; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "ew-7476rpc:green:power"; + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "ew-7476rpc:green:lan"; + gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "ew-7476rpc:blue:wlan2g"; + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + + wlan5g { + label = "ew-7476rpc:blue:wlan5g"; + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + wps { + label = "ew-7476rpc:green:wps"; + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + crossband { + label = "ew-7476rpc:green:crossband"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; +}; + diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts b/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts new file mode 100644 index 0000000000..37caeba23e --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "mt7620a_edimax_ew-747x.dtsi" + +/ { + compatible = "edimax,ew-7478ac", "ralink,mt7620a-soc"; + model = "Edimax EW-7478AC"; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "ew-7478ac:green:power"; + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "ew-7478ac:green:lan"; + gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "ew-7478ac:blue:wlan2g"; + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + + wlan5g { + label = "ew-7478ac:blue:wlan5g"; + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + wps { + label = "ew-7478ac:green:wps"; + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + crossband { + label = "ew-7478ac:green:crossband"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-7478apc.dts b/target/linux/ramips/dts/mt7620a_edimax_ew-7478apc.dts new file mode 100644 index 0000000000..bd1768b34e --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-7478apc.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "edimax,ew-7478apc", "ralink,mt7620a-soc"; + model = "Edimax EW-7478APC"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "ew-7478apc:white:power"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "ew-7478apc:blue:internet"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "ew-7478apc:blue:wlan"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "ew-7478apc:blue:usb"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; +}; + +&gpio2 { + status = "okay"; + + enable_usb_power { + gpio-hog; + line-name = "enable USB power"; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "cimage"; + reg = <0x50000 0x20000>; + read-only; + }; + + partition@70000 { + compatible = "edimax,uimage"; + label = "firmware"; + reg = <0x00070000 0x00790000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + status = "okay"; + mtd-mac-address = <&factory 0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + mediatek,portmap = "wllll"; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy1f: ethernet-phy@1f { + reg = <0x1f>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi b/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi new file mode 100644 index 0000000000..b7d8087d5a --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "ralink,mt7620a-soc"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + keys { + compatible = "gpio-keys"; + + reset_wps { + label = "reset_wps"; + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + switch_high { + label = "switch high"; + gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + switch_off { + label = "switch off"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "cimage"; + reg = <0x50000 0x20000>; + read-only; + }; + + partition@70000 { + compatible = "edimax,uimage"; + label = "firmware"; + reg = <0x00070000 0x00790000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "nd_sd", "rgmii2"; + ralink,function = "gpio"; + }; + }; + + phy_reset_pins: phy-reset { + gpio { + ralink,group = "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + + status = "okay"; + mtd-mac-address = <&factory 0x4>; + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>; + + mediatek,portmap = "l"; + mediatek,mdio-mode = <1>; + + phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + phy-reset-duration = <30>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + status = "disabled"; + reg = <0>; + phy-mode = "rgmii"; + }; + + phy1: ethernet-phy@1 { + status = "disabled"; + reg = <1>; + phy-mode = "rgmii"; + }; + + phy2: ethernet-phy@2 { + status = "disabled"; + reg = <2>; + phy-mode = "rgmii"; + }; + + phy3: ethernet-phy@3 { + status = "disabled"; + reg = <3>; + phy-mode = "rgmii"; + }; + + phy4: ethernet-phy@4 { + status = "disabled"; + reg = <4>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port5 = "gmac"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_glinet_gl-mt300a.dts b/target/linux/ramips/dts/mt7620a_glinet_gl-mt300a.dts new file mode 100644 index 0000000000..2cea9d9beb --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_glinet_gl-mt300a.dts @@ -0,0 +1,151 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "glinet,gl-mt300a", "ralink,mt7620a-soc"; + model = "GL-MT300A"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "gl-mt300a:wan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "gl-mt300a:lan"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "gl-mt300a:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "gl-mt300a:usb"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + BTN_0 { + label = "BTN_0"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + BTN_1 { + label = "BTN_1"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + }; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4000>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wled","ephy","uartf","i2c"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts b/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts new file mode 100644 index 0000000000..a30792cace --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts @@ -0,0 +1,142 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc"; + model = "GL-MT300N"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "gl-mt300n:wan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "gl-mt300n:lan"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "gl-mt300n:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + BTN_0 { + label = "BTN_0"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + BTN_1 { + label = "BTN_1"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4000>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wled","ephy","i2c"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_glinet_gl-mt750.dts b/target/linux/ramips/dts/mt7620a_glinet_gl-mt750.dts new file mode 100644 index 0000000000..11133a126a --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_glinet_gl-mt750.dts @@ -0,0 +1,157 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "glinet,gl-mt750", "ralink,mt7620a-soc"; + model = "GL-MT750"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "gl-mt750:wan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "gl-mt750:lan"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "gl-mt750:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + BTN_0 { + label = "BTN_0"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + BTN_1 { + label = "BTN_1"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + }; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4000>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wled","ephy","uartf"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_head-weblink_hdrm200.dts b/target/linux/ramips/dts/mt7620a_head-weblink_hdrm200.dts new file mode 100644 index 0000000000..ad16d02716 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_head-weblink_hdrm200.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "head-weblink,hdrm200", "ralink,mt7620a-soc"; + model = "Head Weblink HDRM200"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + chosen { + bootargs = "console=ttyS1,57600"; + }; + + leds { + compatible = "gpio-leds"; + + rssi { + label = "hdrm200:red:rssi"; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + }; + + led_system: system { + label = "hdrm200:green:system"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + air { + label = "hdrm200:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + firmware: partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + status = "okay"; + + mtd-mac-address = <&factory 0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + + port@4 { + status = "okay"; + phy-handle = <&phy4>; + phy-mode = "rgmii"; + }; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "pa", "spi refclk", + "wled"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&uart { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_hiwifi_hc5661.dts b/target/linux/ramips/dts/mt7620a_hiwifi_hc5661.dts new file mode 100644 index 0000000000..185e045de1 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_hiwifi_hc5661.dts @@ -0,0 +1,39 @@ +/dts-v1/; + +#include "mt7620a_hiwifi_hc5x61.dtsi" + +/ { + compatible = "hiwifi,hc5661", "hiwifi,hc5x61", "ralink,mt7620a-soc"; + model = "HiWiFi HC5661"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "hc5661:blue:system"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "hc5661:blue:internet"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "hc5661:blue:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "hc5661:blue:wlan5g"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts b/target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts new file mode 100644 index 0000000000..265f7d9bb1 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts @@ -0,0 +1,59 @@ +/dts-v1/; + +#include "mt7620a_hiwifi_hc5x61.dtsi" + +/ { + compatible = "hiwifi,hc5761", "hiwifi,hc5x61", "ralink,mt7620a-soc"; + model = "HiWiFi HC5761"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "hc5761:blue:system"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "hc5761:blue:internet"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "hc5761:blue:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "hc5761:blue:wlan5g"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts b/target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts new file mode 100644 index 0000000000..73f1a4079a --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +#include "mt7620a_hiwifi_hc5x61.dtsi" + +/ { + compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc"; + model = "HiWiFi HC5861"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "hc5861:blue:system"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "hc5861:blue:wlan2g"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "hc5861:blue:internet"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "hc5861:blue:wlan5g"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + turbo { + label = "hc5861:blue:turbo"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <0>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + sdpower { + gpio-export,name = "sdpower"; + gpio-export,output = <0>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + status = "okay"; + mtd-mac-address = <&factory 0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + mediatek,portmap = "wllll"; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci14c3,7662"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_hiwifi_hc5x61.dtsi b/target/linux/ramips/dts/mt7620a_hiwifi_hc5x61.dtsi new file mode 100644 index 0000000000..09b303fd33 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_hiwifi_hc5x61.dtsi @@ -0,0 +1,136 @@ +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "hiwifi,hc5x61", "ralink,mt7620a-soc"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <1>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&sysc { + ralink,gpiomux = "i2c", "jtag"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@fd0000 { + label = "hwf_config"; + reg = <0xfd0000 0x10000>; + read-only; + }; + + bdinfo: partition@fe0000 { + label = "bdinfo"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "backup"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&sdhci { + status = "okay"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uartf", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_hnet_c108.dts b/target/linux/ramips/dts/mt7620a_hnet_c108.dts new file mode 100644 index 0000000000..2d89d34ad5 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_hnet_c108.dts @@ -0,0 +1,187 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Kristian Evensen . + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "hnet,c108", "ralink,mt7620a-soc"; + model = "HNET C108"; + + aliases { + led-boot = &led_lan_green; + led-failsafe = &led_lan_green; + led-running = &led_lan_green; + led-upgrade = &led_lan_green; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + power_modem { + gpio-export,name = "power_modem"; + gpio-export,output = <1>; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + sdcard { + label = "c108:green:sdcard"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + modem_green { + label = "c108:green:modem"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + modem_red { + label = "c108:red:modem"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + lan_red { + label = "c108:red:lan"; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + }; + + led_lan_green: lan_green { + label = "c108:green:lan"; + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + en25q128@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "spi refclk", "ephy"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_iodata_wn-ac1167gr.dts b/target/linux/ramips/dts/mt7620a_iodata_wn-ac1167gr.dts new file mode 100644 index 0000000000..14c851a3a8 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_iodata_wn-ac1167gr.dts @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc"; + model = "I-O DATA WN-AC1167GR"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "wn-ac1167gr:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "wn-ac1167gr:green:wlan2g"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + notification { + label = "wn-ac1167gr:green:notification"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "wn-ac1167gr:green:wlan5g"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + auto { + label = "auto"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + Factory: partition@40000 { + label = "Factory"; + reg = <0x40000 0x8000>; + read-only; + }; + + iNIC_rf: partition@48000 { + label = "iNIC_rf"; + reg = <0x48000 0x8000>; + read-only; + }; + + partition@50000 { + label = "NoUsed"; + reg = <0x50000 0x20000>; + read-only; + }; + + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x70000 0x6b4000>; + }; + + partition@724000 { + label = "manufacture"; + reg = <0x724000 0x8c000>; + read-only; + }; + + partition@7b0000 { + label = "backup"; + reg = <0x7b0000 0x10000>; + read-only; + }; + + partition@7c0000 { + label = "storage"; + reg = <0x7c0000 0x40000>; + read-only; + }; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + mtd-mac-address = <&Factory 0x4>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + + ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + + ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + + ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + ethernet-phy@1f { + reg = <0x1f>; + phy-mode = "rgmii"; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&iNIC_rf 0x0>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&Factory 0x0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_iodata_wn-ac733gr3.dts b/target/linux/ramips/dts/mt7620a_iodata_wn-ac733gr3.dts new file mode 100644 index 0000000000..ea837c4d34 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_iodata_wn-ac733gr3.dts @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "iodata,wn-ac733gr3", "ralink,mt7620a-soc"; + model = "I-O DATA WN-AC733GR3"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "wn-ac733gr3:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + notification { + label = "wn-ac733gr3:green:notification"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "wn-ac733gr3:green:wlan2g"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "wn-ac733gr3:green:wlan5g"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + router { + label = "router"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + auto { + label = "auto"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; + + rtl8367rb { + compatible = "realtek,rtl8367b"; + gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>; + gpio-sck = <&gpio0 23 GPIO_ACTIVE_HIGH>; + realtek,extif1 = <1 0 1 1 1 1 1 1 2>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + Factory: partition@40000 { + label = "Factory"; + reg = <0x40000 0x8000>; + read-only; + }; + + iNIC_rf: partition@48000 { + label = "iNIC_rf"; + reg = <0x48000 0x8000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x6d4000>; + }; + + partition@724000 { + label = "manufacture"; + reg = <0x724000 0x8c000>; + read-only; + }; + + partition@7b0000 { + label = "backup"; + reg = <0x7b0000 0x10000>; + read-only; + }; + + partition@7c0000 { + label = "storage"; + reg = <0x7c0000 0x40000>; + read-only; + }; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins>; + mtd-mac-address = <&Factory 0x4>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; +}; + +&gpio0 { + rtl8367rb_reset { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rtl8367rb-reset"; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "mdio"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&iNIC_rf 0x0>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&Factory 0x0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_kimax_u25awf-h1.dts b/target/linux/ramips/dts/mt7620a_kimax_u25awf-h1.dts new file mode 100644 index 0000000000..4b4d0b6356 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_kimax_u25awf-h1.dts @@ -0,0 +1,116 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/{ + compatible = "kimax,u25awf-h1","ralink,mt7620a-soc"; + model = "Kimax U25AWF-H1"; + + aliases { + led-boot = &led_wifi; + led-failsafe = &led_wifi; + led-running = &led_wifi; + led-upgrade = &led_wifi; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_wifi: wifi { + label = "u25awf:red:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "u25awf:green:lan"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "uartf", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_lava_lr-25g001.dts b/target/linux/ramips/dts/mt7620a_lava_lr-25g001.dts new file mode 100644 index 0000000000..20974c93e2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_lava_lr-25g001.dts @@ -0,0 +1,181 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "lava,lr-25g001", "ralink,mt7620a-soc"; + model = "LAVA LR-25G001"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status: status { + label = "lr-25g001:green:status"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wifi2g { + label = "lr-25g001:green:wifi2g"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wifi5g { + label = "lr-25g001:green:wifi5g"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <1>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x10000 0xfe0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + + port@5 { + status = "okay"; + phy-mode = "rgmii"; + mediatek,fixed-link = <1000 1 1 1>; + }; + + mdio-bus { + status = "okay"; + mediatek,mdio-mode = <1>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + qca,ar8327-initvals = < + 0x04 0x87300000 /* PORT0 PAD MODE CTRL */ + 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x00000000 /* PORT6_STATUS */ + >; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76x0e@0,0 { + reg = <0x0000 0 0 0 0>; + mtd-mac-address = <&config 0xe07e>; + mtd-mac-address-increment = <(2)>; + mediatek,mtd-eeprom = <&config 0xe08a>; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uartf", "i2c"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1.dts b/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1.dts new file mode 100644 index 0000000000..47505b0984 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1.dts @@ -0,0 +1,58 @@ +/dts-v1/; + +#include "mt7620a_lenovo_newifi-y1.dtsi" + +/ { + compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc"; + model = "Lenovo Y1"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "y1:blue:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + wlan1 { + label = "y1:blue:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wlan2 { + label = "y1:blue:wifi5g"; + gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "y1:blue:usb"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + lan { + label = "y1:blue:lan"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "y1:blue:internet"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; diff --git a/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1.dtsi b/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1.dtsi new file mode 100644 index 0000000000..5d6c9922fd --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1.dtsi @@ -0,0 +1,110 @@ +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uartf", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1s.dts b/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1s.dts new file mode 100644 index 0000000000..ccb0d18ead --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_lenovo_newifi-y1s.dts @@ -0,0 +1,115 @@ +/dts-v1/; + +#include "mt7620a_lenovo_newifi-y1.dtsi" + +/ { + compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc"; + model = "Lenovo Y1S"; + + aliases { + led-boot = &led_power_blue; + led-failsafe = &led_power_blue; + led-running = &led_power_blue; + led-upgrade = &led_power_blue; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb0 { + gpio-export,name = "usb0"; + gpio-export,output = <1>; + gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; + }; + usb1 { + gpio-export,name = "usb1"; + gpio-export,output = <1>; + gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + }; + usb2 { + gpio-export,name = "usb2"; + gpio-export,output = <1>; + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power1 { + label = "y1s:yellow:power"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + led_power_blue: power2 { + label = "y1s:blue:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + wlan1 { + label = "y1s:yellow:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wlan2 { + label = "y1s:blue:wifi"; + gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; + + usb1 { + label = "y1s:yellow:usb"; + gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "y1s:blue:usb"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + internet { + label = "y1s:blue:internet"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðernet { + status = "okay"; + mtd-mac-address = <&factory 0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + mediatek,portmap = "wllll"; + + port@4 { + status = "okay"; + phy-handle = <&phy4>; + phy-mode = "rgmii"; + }; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; diff --git a/target/linux/ramips/dts/mt7620a_linksys_e1700.dts b/target/linux/ramips/dts/mt7620a_linksys_e1700.dts new file mode 100644 index 0000000000..2ea7400a71 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_linksys_e1700.dts @@ -0,0 +1,163 @@ +/* + * Device Tree file for the Linksys E1700 + * + * Copyright (C) 2014 Imre Kaloz + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "linksys,e1700", "ralink,mt7620a-soc"; + model = "Linksys E1700"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "e1700:green:power"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "e1700:green:wps"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + status = "okay"; + mtd-mac-address = <&factory 0x28>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy1f: ethernet-phy@1f { + reg = <0x1f>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_microduino_microwrt.dts b/target/linux/ramips/dts/mt7620a_microduino_microwrt.dts new file mode 100644 index 0000000000..a010a9c626 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_microduino_microwrt.dts @@ -0,0 +1,108 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "microduino,microwrt", "ralink,mt7620a-soc"; + model = "Microduino MicroWRT"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x20000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x40000 0xfc0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "wled", "i2c", "wdt", "uartf"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex2700.dts b/target/linux/ramips/dts/mt7620a_netgear_ex2700.dts new file mode 100644 index 0000000000..7d7b2220f7 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_ex2700.dts @@ -0,0 +1,155 @@ +/* + * Device Tree file for the Netgear EX2700 + * + * Copyright (C) 2016 Joseph C. Lehner + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "netgear,ex2700", "ralink,mt7620a-soc"; + model = "Netgear EX2700"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_g { + label = "ex2700:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + power_r { + label = "ex2700:red:power"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + device_g { + label = "ex2700:green:device"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + device_r { + label = "ex2700:red:device"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + router_g { + label = "ex2700:green:router"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + router_r { + label = "ex2700:red:router"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "ex2700:green:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x40000 0x3b0000>; + }; + + art: partition@3f0000 { + label = "art"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&art 0x0>; +}; + +&wmac { + mtd-mac-address = <&art 0x6>; + ralink,mtd-eeprom = <&art 0x1000>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts new file mode 100644 index 0000000000..d971909b29 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts @@ -0,0 +1,170 @@ +/* This file is released into the public domain */ + +/dts-v1/; + +#include +#include + +#include "mt7620a.dtsi" + +/ { + compatible = "netgear,ex3700", "ralink,mt7620a-soc"; + model = "Netgear EX3700/EX3800"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_g { + label = "ex3700:green:power"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + power_a { + label = "ex3700:amber:power"; + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + router_g { + label = "ex3700:green:router"; + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + }; + + router_r { + label = "ex3700:red:router"; + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + }; + + device_g { + label = "ex3700:green:device"; + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + }; + + device_r { + label = "ex3700:red:device"; + gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "ex3700:green:wps"; + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x790000>; + }; + + partition@7e0000 { + label = "board_data"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + partition@7f0000 { + label = "nvram"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0 >; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "rgmii2", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts b/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts new file mode 100644 index 0000000000..cc339da5e2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts @@ -0,0 +1,153 @@ +/* This file is released into the public domain */ + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc"; + model = "Netgear WN3000RP v3"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_g { + label = "wn3000rpv3:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + power_r { + label = "wn3000rpv3:red:power"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + client_g { + label = "wn3000rpv3:green:client"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + client_r { + label = "wn3000rpv3:red:client"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + router_g { + label = "wn3000rpv3:green:router"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + router_r { + label = "wn3000rpv3:red:router"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wn3000rpv3:green:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + l_arrow { + label = "wn3000rpv3:blue:leftarrow"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + r_arrow { + label = "wn3000rpv3:blue:rightarrow"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x40000 0x7b0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&art 0x0>; +}; + +&wmac { + mtd-mac-address = <&art 0x6>; + ralink,mtd-eeprom = <&art 0x1000>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts b/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts new file mode 100644 index 0000000000..6b93b8d089 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_ohyeah_oy-0001.dts @@ -0,0 +1,130 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "ohyeah,oy-0001", "ralink,mt7620a-soc"; + model = "OY-0001"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_power: powerled { + label = "oy-0001:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + wifiled { + label = "oy-0001:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + s1 { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mediatek,portmap = "llllw"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_phicomm_k2g.dts b/target/linux/ramips/dts/mt7620a_phicomm_k2g.dts new file mode 100644 index 0000000000..4ca5229745 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_phicomm_k2g.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "phicomm,k2g", "ralink,mt7620a-soc"; + model = "Phicomm K2G"; + + aliases { + led-boot = &led_blue; + led-failsafe = &led_blue; + led-running = &led_blue; + led-upgrade = &led_blue; + serial0 = &uartlite; + }; + + leds { + compatible = "gpio-leds"; + + led_blue: blue { + label = "k2g:blue:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + yellow { + label = "k2g:yellow:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + red { + label = "k2g:red:status"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x30000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "u-boot-env"; + read-only; + }; + + factory: partition@40000 { + reg = <0x40000 0x10000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x50000 0x50000>; + label = "permanent_config"; + read-only; + }; + + partition@a0000 { + compatible = "denx,uimage"; + reg = <0xa0000 0x760000>; + label = "firmware"; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins &mdio_pins>; + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; diff --git a/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts b/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts new file mode 100644 index 0000000000..564b083f82 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts @@ -0,0 +1,123 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "phicomm,psg1208", "ralink,mt7620a-soc"; + model = "Phicomm PSG1208"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-running = &led_wps; + led-upgrade = &led_wps; + }; + + leds { + compatible = "gpio-leds"; + + led_wps: wps { + label = "psg1208:white:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "psg1208:white:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_phicomm_psg1218.dtsi b/target/linux/ramips/dts/mt7620a_phicomm_psg1218.dtsi new file mode 100644 index 0000000000..33eabb6f78 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_phicomm_psg1218.dtsi @@ -0,0 +1,79 @@ +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "phicomm,psg1218", "ralink,mt7620a-soc"; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_phicomm_psg1218a.dts b/target/linux/ramips/dts/mt7620a_phicomm_psg1218a.dts new file mode 100644 index 0000000000..dbde2a8047 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_phicomm_psg1218a.dts @@ -0,0 +1,55 @@ +/dts-v1/; + +#include "mt7620a_phicomm_psg1218.dtsi" + +/ { + compatible = "phicomm,psg1218a", "phicomm,psg1218", "ralink,mt7620a-soc"; + model = "Phicomm PSG1218 rev.A"; + + aliases { + led-boot = &led_blue; + led-failsafe = &led_blue; + led-running = &led_blue; + led-upgrade = &led_blue; + }; + + leds { + compatible = "gpio-leds"; + led_blue: blue { + label = "psg1218a:blue:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + yellow { + label = "psg1218a:yellow:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + red { + label = "psg1218a:red:status"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; +}; + +&wmac { + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; diff --git a/target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts b/target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts new file mode 100644 index 0000000000..0f38b4fc57 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_phicomm_psg1218b.dts @@ -0,0 +1,50 @@ +/dts-v1/; + +#include "mt7620a_phicomm_psg1218.dtsi" + +/ { + compatible = "phicomm,psg1218b", "phicomm,psg1218", "ralink,mt7620a-soc"; + model = "Phicomm PSG1218 rev.B"; + + aliases { + led-boot = &led_blue; + led-failsafe = &led_blue; + led-running = &led_blue; + led-upgrade = &led_blue; + }; + + leds { + compatible = "gpio-leds"; + led_blue: blue { + label = "psg1218b:blue:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + yellow { + label = "psg1218b:yellow:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + red { + label = "psg1218b:red:status"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; +}; diff --git a/target/linux/ramips/dts/mt7620a_planex_cs-qr10.dts b/target/linux/ramips/dts/mt7620a_planex_cs-qr10.dts new file mode 100644 index 0000000000..dadd37acba --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_planex_cs-qr10.dts @@ -0,0 +1,158 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "planex,cs-qr10", "ralink,mt7620a-soc"; + model = "Planex CS-QR10"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "cs-qr10:red:power"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + s1 { + label = "reset"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + s2 { + label = "wps"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&i2c { + status = "okay"; +}; + +&i2s { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pcm_i2s_pins>; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pcm { + status = "okay"; +}; + +&gdma { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi refclk", "rgmii1"; + ralink,function = "gpio"; + }; + wdt { + ralink,group = "wdt"; + ralink,function = "wdt refclk"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&gsw { + ralink,port4 = "ephy"; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_planex_db-wrt01.dts b/target/linux/ramips/dts/mt7620a_planex_db-wrt01.dts new file mode 100644 index 0000000000..bb2c14e096 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_planex_db-wrt01.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "planex,db-wrt01", "ralink,mt7620a-soc"; + model = "Planex DB-WRT01"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "db-wrt01:orange:power"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + s1 { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi refclk", "rgmii1"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_planex_mzk-750dhp.dts b/target/linux/ramips/dts/mt7620a_planex_mzk-750dhp.dts new file mode 100644 index 0000000000..a4a6c9b8be --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_planex_mzk-750dhp.dts @@ -0,0 +1,137 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc"; + model = "Planex MZK-750DHP"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "mzk-750dhp:green:wps"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "mzk-750dhp:green:power"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "mzk-750dhp:green:wlan5g"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + s1 { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + s2 { + label = "wps"; + gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_planex_mzk-ex300np.dts b/target/linux/ramips/dts/mt7620a_planex_mzk-ex300np.dts new file mode 100644 index 0000000000..6578d952c0 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_planex_mzk-ex300np.dts @@ -0,0 +1,142 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "planex,mzk-ex300np", "ralink,mt7620a-soc"; + model = "Planex MZK-EX300NP"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-running = &led_wps; + led-upgrade = &led_wps; + }; + + leds { + compatible = "gpio-leds"; + + wifi { + label = "mzk-ex300np:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + led_wps: wps { + label = "mzk-ex300np:green:wps"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + rep { + label = "mzk-ex300np:blue:rep"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + wifi1 { + label = "mzk-ex300np:blue:wifi1"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + }; + + wifi2 { + label = "mzk-ex300np:blue:wifi2"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + wifi3 { + label = "mzk-ex300np:blue:wifi3"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x730000>; + }; + + partition@780000 { + label = "Udata"; + reg = <0x780000 0x80000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi refclk", "rgmii1", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_planex_mzk-ex750np.dts b/target/linux/ramips/dts/mt7620a_planex_mzk-ex750np.dts new file mode 100644 index 0000000000..497693d393 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_planex_mzk-ex750np.dts @@ -0,0 +1,158 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc"; + model = "Planex MZK-EX750NP"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "mzk-ex750np:red:power"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "mzk-ex750np:red:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "mzk-ex750np:green:wps"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + rep { + label = "mzk-ex750np:blue:rep"; + gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; + }; + + wifi1 { + label = "mzk-ex750np:blue:wifi1"; + gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + }; + + wifi2 { + label = "mzk-ex750np:blue:wifi2"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; + }; + + wifi3 { + label = "mzk-ex750np:blue:wifi3"; + gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x730000>; + }; + + partition@780000 { + label = "Udata"; + reg = <0x780000 0x80000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uartf", "nd_sd", "rgmii2", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_ralink_mt7620a-evb.dts b/target/linux/ramips/dts/mt7620a_ralink_mt7620a-evb.dts new file mode 100644 index 0000000000..c9d3d76729 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_ralink_mt7620a-evb.dts @@ -0,0 +1,130 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "ralink,mt7620a-evb", "ralink,mt7620a-soc"; + model = "Ralink MT7620a + MT7610e evaluation board"; + + keys { + compatible = "gpio-keys"; + poll-interval = <20>; + + s2 { + label = "S2"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + s3 { + label = "S3"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + mediatek,portmap = "llllw"; + + port@4 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy4>; + }; + + port@5 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&sdhci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7530-evb.dts b/target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7530-evb.dts new file mode 100644 index 0000000000..976e2acca3 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7530-evb.dts @@ -0,0 +1,120 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-mt7530-evb", "ralink,mt7620a-soc"; + model = "Ralink MT7620a + MT7530 evaluation board"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + mediatek,portmap = "llllw"; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy1f: ethernet-phy@1f { + reg = <0x1f>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&pcie { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7610e-evb.dts b/target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7610e-evb.dts new file mode 100644 index 0000000000..a2864de94f --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7610e-evb.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "ralink,mt7620a-mt7610e-evb", "ralink,mt7620a-soc"; + model = "Ralink MT7620A evaluation board"; + + keys { + compatible = "gpio-keys"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mediatek,portmap = "llllw"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&sdhci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_ralink_mt7620a-v22sg-evb.dts b/target/linux/ramips/dts/mt7620a_ralink_mt7620a-v22sg-evb.dts new file mode 100644 index 0000000000..33d23f2201 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_ralink_mt7620a-v22sg-evb.dts @@ -0,0 +1,120 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "ralink,mt7620a-v22sg-evb", "ralink,mt7620a-soc"; + model = "Ralink MT7620a V22SG High Power evaluation board"; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + aoss { + label = "aoss"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + nand { + compatible = "mtk,mt7620-nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x20000>; + read-only; + }; + + factory: partition@60000 { + label = "factory"; + reg = <0x60000 0x20000>; + read-only; + }; + + partition@80000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x80000 0x7f80000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "spi"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + mediatek,portmap = "llllw"; + + port@4 { + status = "okay"; + phy-handle = <&phy4>; + phy-mode = "rgmii"; + }; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&pcie { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_sanlinking_d240.dts b/target/linux/ramips/dts/mt7620a_sanlinking_d240.dts new file mode 100644 index 0000000000..2110959ee8 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_sanlinking_d240.dts @@ -0,0 +1,206 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Kristian Evensen . + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "sanlinking,d240", "ralink,mt7620a-soc"; + model = "Sanlinking Technologies D240"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + power_mpcie2 { + gpio-export,name = "power_mpcie2"; + gpio-export,output = <1>; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + }; + + power_mpcie1 { + gpio-export,name = "power_mpcie1"; + gpio-export,output = <1>; + gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "d240:blue:power"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + usb { + label = "d240:blue:usb"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + air { + label = "d240:blue:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + en25q128@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&sdhci { + status = "okay"; + /* the pins function is already set during pinmux driver load */ + /delete-property/ pinctrl-0; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; + ralink,function = "gpio"; + }; + + /* + * The sd function of the nd_sd group configures two of the + * groups pins as gpios. The pins are used as PCIe reset/power. + * Due to the driver load order, the pins are configured way to + * late if triggered by the sd-card driver. + * To not introduce another kind of driver load order + * dependency and configure the pins as early as possible, + * means during pinmux driver load. + */ + gpio_sd { + ralink,group = "nd_sd"; + ralink,function = "sd"; + }; + }; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_sercomm_na930.dts b/target/linux/ramips/dts/mt7620a_sercomm_na930.dts new file mode 100644 index 0000000000..6d85914265 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_sercomm_na930.dts @@ -0,0 +1,187 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "sercomm,na930", "ralink,mt7620a-soc"; + model = "Sercomm NA930"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS1,57600"; + }; + + nand { + compatible = "mtk,mt7620-nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@200000 { + label = "factory"; + reg = <0x200000 0x40000>; + read-only; + }; + + partition@240000 { + label = "Config"; + reg = <0x240000 0x400000>; + read-only; + }; + + partition@640000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x640000 0x1400000>; + }; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + zwave { + label = "zwave"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + zwave { + label = "na930:blue:zwave"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + status { + label = "na930:blue:status"; + gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + service { + label = "na930:blue:service"; + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "na930:blue:power"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + telit { + gpio-export,name = "telit"; + gpio-export,output = <1>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "rgmii2", "spi", "ephy"; + ralink,function = "gpio"; + }; + + uartf_gpio { + ralink,group = "uartf"; + ralink,function = "gpio uartf"; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + mediatek,portmap = "llllw"; + + port@4 { + status = "okay"; + phy-handle = <&phy4>; + phy-mode = "rgmii"; + }; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts new file mode 100644 index 0000000000..e20b873569 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts @@ -0,0 +1,191 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc"; + model = "TP-Link Archer C2 v1"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-running = &led_wps; + led-upgrade = &led_wps; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk"; + ralink,function = "gpio"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "c2-v1:green:lan"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "c2-v1:green:usb"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led_wps: wps { + label = "c2-v1:green:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "c2-v1:green:wan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "c2-v1:green:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + rtl8367rb { + compatible = "realtek,rtl8367b", "rtl8367b"; + cpu_port = <6>; + realtek,extif1 = <1 0 1 1 1 1 1 1 2>; + mii-bus = <&mdio0>; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + read-only; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +ðernet { + status = "okay"; + mtd-mac-address = <&rom 0xf100>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio0: mdio-bus { + status = "okay"; + }; +}; + + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&wmac { + ralink,mtd-eeprom = <&radio 0>; + mtd-mac-address = <&rom 0xf100>; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&radio 0x8000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts new file mode 100644 index 0000000000..602cc70e02 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts @@ -0,0 +1,199 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "tplink,archer-c20-v1", "ralink,mt7620a-soc"; + model = "TP-Link Archer C20 v1"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "c20-v1:blue:lan"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "c20-v1:blue:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + usb { + label = "c20-v1:blue:usb"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wan { + label = "c20-v1:blue:wan"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + }; + + wan_orange { + label = "c20-v1:orange:wan"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + + wlan5g { + label = "c20-v1:blue:wlan5g"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "c20-v1:blue:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "c20-v1:blue:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + read-only; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + mtd-mac-address = <&rom 0xf100>; + mediatek,portmap = "wllll"; + }; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&radio 0>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <(-2)>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&radio 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <(-1)>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts new file mode 100644 index 0000000000..7dfaddeee4 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts @@ -0,0 +1,159 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "tplink,archer-c20i", "ralink,mt7620a-soc"; + model = "TP-Link Archer C20i"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + lan { + label = "c20i:blue:lan"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + usb { + label = "c20i:blue:usb"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + wps { + label = "c20i:blue:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + wan { + label = "c20i:blue:wan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + wlan { + label = "c20i:blue:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + reset_wps { + label = "reset_wps"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + mtd-mac-address = <&rom 0xf100>; + mediatek,portmap = "wllll"; + }; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&radio 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&radio 32768>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts new file mode 100644 index 0000000000..b1e13bebea --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c50-v1.dts @@ -0,0 +1,198 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "tplink,archer-c50-v1", "ralink,mt7620a-soc"; + model = "TP-Link Archer C50 v1"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "c50:green:lan"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "c50:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + usb { + label = "c50:green:usb"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wan { + label = "c50:green:wan"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + wan_orange { + label = "c50:orange:wan"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "c50:green:wlan5g"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "c50:green:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "c50:green:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + read-only; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + mtd-mac-address = <&rom 0xf100>; + mediatek,portmap = "wllll"; + }; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&radio 0>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <(-2)>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&radio 32768>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&rom 0xf100>; + mtd-mac-address-increment = <(-1)>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts new file mode 100644 index 0000000000..566b2431fc --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts @@ -0,0 +1,202 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "tplink,archer-mr200", "ralink,mt7620a-soc"; + model = "TP-Link Archer MR200"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "mr200:white:lan"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "mr200:white:wan"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "mr200:white:power"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + 4g { + label = "mr200:white:4g"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "mr200:white:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + signal1 { + label = "mr200:white:signal1"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + signal2 { + label = "mr200:white:signal2"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + signal3 { + label = "mr200:white:signal3"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + signal4 { + label = "mr200:white:signal4"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "mr200:white:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + power_usb { + gpio-export,name = "power_usb1"; + gpio-export,output = <1>; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x20000 0x7b0000>; + }; + + rom: partition@7d0000 { + label = "rom"; + reg = <0x7d0000 0x10000>; + read-only; + }; + + partition@7e0000 { + label = "romfile"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + radio: partition@7f0000 { + label = "radio"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&rom 0xf100>; + mediatek,portmap = "llll"; + }; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&radio 0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&radio 32768>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_xiaomi_miwifi-mini.dts b/target/linux/ramips/dts/mt7620a_xiaomi_miwifi-mini.dts new file mode 100644 index 0000000000..e8ff02f2ab --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_xiaomi_miwifi-mini.dts @@ -0,0 +1,162 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc"; + model = "Xiaomi MiWiFi Mini"; + + aliases { + led-boot = &led_blue; + led-failsafe = &led_blue; + led-running = &led_blue; + led-upgrade = &led_blue; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_blue: blue { + label = "miwifi-mini:blue:status"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + yellow { + label = "miwifi-mini:yellow:status"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + red { + label = "miwifi-mini:red:status"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@fd0000 { + label = "crash"; + reg = <0xfd0000 0x10000>; + }; + + partition@fe0000 { + label = "reserved"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "Bdata"; + reg = <0xff0000 0x10000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "rgmii1"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_youku_yk1.dts b/target/linux/ramips/dts/mt7620a_youku_yk1.dts new file mode 100644 index 0000000000..5d90b17a04 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_youku_yk1.dts @@ -0,0 +1,138 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "youku,yk1", "ralink,mt7620a-soc"; + model = "YOUKU YK1"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + wan { + label = "youku-yk1:blue:wan"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + air { + label = "youku-yk1:blue:air"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + usb { + label = "youku-yk1:blue:usb"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + led_power: power { + label = "youku-yk1:blue:power"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "mx25l25635f", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "rgmii1", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_yukai_bocco.dts b/target/linux/ramips/dts/mt7620a_yukai_bocco.dts new file mode 100644 index 0000000000..cc9c6688dc --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_yukai_bocco.dts @@ -0,0 +1,165 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "yukai,bocco", "ralink,mt7620a-soc"; + model = "YUKAI Engineering BOCCO"; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + s1 { + gpio-export,name = "rec"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + s2 { + gpio-export,name = "play"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Audio-I2S"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + simple-audio-card,widgets = + "Headphone", "Headphones"; + simple-audio-card,routing = + "Headphones", "HP_L", + "Headphones", "HP_R"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + + dailink0_master: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&i2c { + status = "okay"; + + codec: wm8960@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8960"; + reg = <0x1a>; + + wlf,shared-lrclk; + }; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pcm_i2s_pins>; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pcm { + status = "okay"; +}; + +&gdma { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi refclk", "rgmii1"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&gsw { + ralink,port4 = "ephy"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_we1026-5g-16m.dts b/target/linux/ramips/dts/mt7620a_zbtlink_we1026-5g-16m.dts new file mode 100644 index 0000000000..e2eb5b6329 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zbtlink_we1026-5g-16m.dts @@ -0,0 +1,81 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Kristian Evensen . + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "mt7620a_zbtlink_we1026-5g.dtsi" + +/ { + compatible = "zbtlink,we1026-5g-16m", "ralink,mt7620a-soc"; + model = "ZBT WE1026-5G (16M)"; +}; + +&spi0 { + status = "okay"; + + en25q128@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + firmware: partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_we1026-5g.dtsi b/target/linux/ramips/dts/mt7620a_zbtlink_we1026-5g.dtsi new file mode 100644 index 0000000000..e7e64e251a --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zbtlink_we1026-5g.dtsi @@ -0,0 +1,125 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Kristian Evensen . + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "zbtlink,we1026-5g", "ralink,mt7620a-soc"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + lan { + label = "we1026-5g:green:lan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "we1026-5g:green:usb"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wifi { + label = "we1026-5g:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "spi refclk", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci14c3,7662"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-ape522ii.dts b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-ape522ii.dts new file mode 100644 index 0000000000..70ad0f0b58 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-ape522ii.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc"; + model = "ZBT-APE522II"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + sys1 { + label = "zbt-ape522ii:green:sys1"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + sys2 { + label = "zbt-ape522ii:green:sys2"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + sys3 { + label = "zbt-ape522ii:green:sys3"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + sys4 { + label = "zbt-ape522ii:green:sys4"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wlan2g4 { + label = "zbt-ape522ii:green:wlan2g4"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wled", "i2c", "uartf", "wdt"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-16m.dts b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-16m.dts new file mode 100644 index 0000000000..7f2b2646b2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-16m.dts @@ -0,0 +1,48 @@ +/dts-v1/; + +#include "mt7620a_zbtlink_zbt-we826.dtsi" + +/ { + compatible = "zbtlink,zbt-we826-16m", "zbtlink,zbt-we826", "ralink,mt7620a-soc"; + model = "ZBT-WE826 (16M)"; +}; + +&spi0 { + status = "okay"; + + en25q128@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + firmware: partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-32m.dts b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-32m.dts new file mode 100644 index 0000000000..e7cdcab5e9 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-32m.dts @@ -0,0 +1,48 @@ +/dts-v1/; + +#include "mt7620a_zbtlink_zbt-we826.dtsi" + +/ { + compatible = "zbtlink,zbt-we826-32m", "zbtlink,zbt-we826", "ralink,mt7620a-soc"; + model = "ZBT-WE826 (32M)"; +}; + +&spi0 { + status = "okay"; + + en25q128@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + firmware: partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts new file mode 100644 index 0000000000..243126125b --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a_zbtlink_zbt-we826.dtsi" + +/ { + compatible = "zbtlink,zbt-we826-e", "zbtlink,zbt-we826", "ralink,mt7620a-soc"; + model = "ZBT-WE826-E"; + + /delete-node/ leds; + + leds { + compatible = "gpio-leds"; + + led_power: gsm { + label = "zbt-we826-e:blue:gsm"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + signal { + label = "zbt-we826-e:green:signal"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + sim { + label = "zbt-we826-e:red:sim"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + air { + label = "zbt-we826-e:red:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + firmware: partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi new file mode 100644 index 0000000000..0776ea7a79 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi @@ -0,0 +1,93 @@ +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + led_power: power { + label = "zbt-we826:green:power"; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + usb { + label = "zbt-we826:green:usb"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + air { + label = "zbt-we826:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_zte_q7.dts b/target/linux/ramips/dts/mt7620a_zte_q7.dts new file mode 100644 index 0000000000..5b4c5ee047 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zte_q7.dts @@ -0,0 +1,125 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "zte,q7", "ralink,mt7620a-soc"; + model = "ZTE Q7"; + + aliases { + led-boot = &led_status_blue; + led-failsafe = &led_status_blue; + led-running = &led_status_blue; + led-upgrade = &led_status_blue; + }; + + leds { + compatible = "gpio-leds"; + + statred { + label = "zte-q7:red:status"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: statblue { + label = "zte-q7:blue:status"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; diff --git a/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts b/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts new file mode 100644 index 0000000000..3d6d2c6f06 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts @@ -0,0 +1,178 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc"; + model = "ZyXEL Keenetic Viva"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "kng_rc:green:wan"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "kng_rc:green:usb"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + power_alert { + label = "kng_rc:red:power"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "kng_rc:green:wifi"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + led_power_green: power { + label = "kng_rc:green:power"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + fn { + label = "fn"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb_power { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; + + rtl8367rb { + compatible = "realtek,rtl8367b"; + cpu_port = <7>; + realtek,extif2 = <1 0 1 1 1 1 1 1 2>; + mii-bus = <&mdio0>; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins &mdio_pins>; + mtd-mac-address = <&factory 0x00004>; + + port@4 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + phy-handle = <&phy4>; + }; + + mdio0: mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + }; +}; + +&gsw { + mediatek,port4 = "gmac"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620n_asus_rt-n12p.dts b/target/linux/ramips/dts/mt7620n_asus_rt-n12p.dts new file mode 100644 index 0000000000..83a7b6adf0 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_asus_rt-n12p.dts @@ -0,0 +1,127 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "asus,rt-n12p", "ralink,mt7620n-soc"; + model = "Asus RT-N12+"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "rt-n12p:green:wan"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "rt-n12p:green:lan"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "rt-n12p:green:power"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + air { + label = "rt-n12p:green:air"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_asus_rt-n14u.dts b/target/linux/ramips/dts/mt7620n_asus_rt-n14u.dts new file mode 100644 index 0000000000..834eb0ddf3 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_asus_rt-n14u.dts @@ -0,0 +1,140 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "asus,rt-n14u", "ralink,mt7620n-soc"; + model = "Asus RT-N14U"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "rt-n14u:blue:wan"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "rt-n14u:blue:lan"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "rt-n14u:blue:usb"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led_power: power { + label = "rt-n14u:blue:power"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + air { + label = "rt-n14u:blue:air"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "wled", "i2c"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_buffalo_wmr-300.dts b/target/linux/ramips/dts/mt7620n_buffalo_wmr-300.dts new file mode 100644 index 0000000000..f0f1cc1337 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_buffalo_wmr-300.dts @@ -0,0 +1,116 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "buffalo,wmr-300", "ralink,mt7620n-soc"; + model = "Buffalo WMR-300"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + leds { + compatible = "gpio-leds"; + + aoss1 { + label = "wmr-300:red:aoss"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + aoss2 { + label = "wmr-300:green:aoss"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + led_status: status { + label = "wmr-300:green:status"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + aoss { + label = "aoss"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "ephy"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_comfast_cf-wr800n.dts b/target/linux/ramips/dts/mt7620n_comfast_cf-wr800n.dts new file mode 100644 index 0000000000..65f44e43d7 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_comfast_cf-wr800n.dts @@ -0,0 +1,125 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc"; + model = "Comfast CF-WR800N"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-running = &led_wps; + led-upgrade = &led_wps; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + ethernet { + label = "cf-wr800n:white:ethernet"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "cf-wr800n:white:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + led_wps: wps { + label = "cf-wr800n:white:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "wled", "spi refclk", "i2c"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_dlink_dwr-116-a1.dts b/target/linux/ramips/dts/mt7620n_dlink_dwr-116-a1.dts new file mode 100644 index 0000000000..6f76a64039 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_dlink_dwr-116-a1.dts @@ -0,0 +1,114 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "dlink,dwr-116-a1", "ralink,mt7620n-soc"; + model = "D-Link DWR-116 A1/A2"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status: status { + label = "dwr-116-a1:green:status"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + wifi { + label = "dwr-116-a1:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x10000 0x7e0000>; + }; + + config: partition@7f0000 { + label = "config"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mediatek,portmap = "llllw"; + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; +}; diff --git a/target/linux/ramips/dts/mt7620n_dlink_dwr-921-c1.dts b/target/linux/ramips/dts/mt7620n_dlink_dwr-921-c1.dts new file mode 100644 index 0000000000..92bcd54a42 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_dlink_dwr-921-c1.dts @@ -0,0 +1,152 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "dlink,dwr-921-c1", "ralink,mt7620n-soc"; + model = "D-Link DWR-921 C1"; + + aliases { + led-boot = &led_sstrenghg; + led-failsafe = &led_sstrenghg; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + sms { + label = "dwr-921-c1:green:sms"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "dwr-921-c1:green:lan"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + led_sstrenghg: sstrengthg { + label = "dwr-921-c1:green:sigstrength"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + sstrengthr { + label = "dwr-921-c1:red:sigstrength"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + 4g { + label = "dwr-921-c1:green:4g"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + 3g { + label = "dwr-921-c1:green:3g"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "dwr-921-c1:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + lte_modem_enable { + gpio-export,name = "lte_modem_enable"; + gpio-export,output = <1>; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x10000 0xfe0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + port@4 { + status = "okay"; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "spi refclk", "i2c", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_dlink_dwr-922-e2.dts b/target/linux/ramips/dts/mt7620n_dlink_dwr-922-e2.dts new file mode 100644 index 0000000000..c2dd26a09d --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_dlink_dwr-922-e2.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "dlink,dwr-922-e2", "ralink,mt7620n-soc"; + model = "D-Link DWR-922 E2"; + + aliases { + led-boot = &sstrengthg; + led-failsafe = &sstrengthg; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + led-boot = &sstrengthg; + + sms { + label = "dwr-922-e2:green:sms"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "dwr-922-e2:green:lan"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + sstrengthg: sstrengthg { + label = "dwr-922-e2:green:sigstrength"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + sstrengthr { + label = "dwr-922-e2:red:sigstrength"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + 4g { + label = "dwr-922-e2:green:4g"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + 3g { + label = "dwr-922-e2:green:3g"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "dwr-922-e2:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + lte_modem_enable { + gpio-export,name = "lte_modem_enable"; + gpio-export,output = <1>; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x10000 0xfe0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + port@4 { + status = "okay"; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "spi refclk", "i2c", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_elecom_wrh-300cr.dts b/target/linux/ramips/dts/mt7620n_elecom_wrh-300cr.dts new file mode 100644 index 0000000000..eb6dbe6d1a --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_elecom_wrh-300cr.dts @@ -0,0 +1,137 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "elecom,wrh-300cr", "ralink,mt7620n-soc"; + model = "ELECOM WRH-300CR"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-running = &led_wps; + led-upgrade = &led_wps; + }; + + leds { + compatible = "gpio-leds"; + + led_wps: wps { + label = "wrh-300cr:green:wps"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + ethernet { + label = "wrh-300cr:green:ethernet"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "wrh-300cr:green:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "recover"; + reg = <0x50000 0x1c0000>; + read-only; + }; + + partition@210000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x210000 0xdf0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x2e>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_kimax_u35wf.dts b/target/linux/ramips/dts/mt7620n_kimax_u35wf.dts new file mode 100644 index 0000000000..d058b83949 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_kimax_u35wf.dts @@ -0,0 +1,116 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "kimax,u35wf","ralink,mt7620n-soc"; + model = "Kimax U35WF"; + + aliases { + led-boot = &led_wifi; + led-failsafe = &led_wifi; + led-running = &led_wifi; + led-upgrade = &led_wifi; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_wifi: wifi { + label = "u35wf:blue:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "u35wf:green:eth"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_kingston_mlw221.dts b/target/linux/ramips/dts/mt7620n_kingston_mlw221.dts new file mode 100644 index 0000000000..815370e6fd --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_kingston_mlw221.dts @@ -0,0 +1,132 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "kingston,mlw221", "ralink,mt7620n-soc"; + model = "Kingston MLW221"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "mlw221:blue:system"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "mlw221:blue:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + system { + label = "system"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf60000>; + }; + + partition@fb0000 { + label = "user-config"; + reg = <0xfb0000 0x50000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_kingston_mlwg2.dts b/target/linux/ramips/dts/mt7620n_kingston_mlwg2.dts new file mode 100644 index 0000000000..f88af71896 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_kingston_mlwg2.dts @@ -0,0 +1,132 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "kingston,mlwg2", "ralink,mt7620n-soc"; + model = "Kingston MLWG2"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "mlwg2:blue:system"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "mlwg2:blue:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + system { + label = "system"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf60000>; + }; + + partition@fb0000 { + label = "user-config"; + reg = <0xfb0000 0x50000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_nexx_wt3020-4m.dts b/target/linux/ramips/dts/mt7620n_nexx_wt3020-4m.dts new file mode 100644 index 0000000000..412c259329 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_nexx_wt3020-4m.dts @@ -0,0 +1,48 @@ +/dts-v1/; + +#include "mt7620n_nexx_wt3020.dtsi" + +/ { + compatible = "nexx,wt3020-4m", "nexx,wt3020", "ralink,mt7620n-soc"; + model = "Nexx WT3020 (4M)"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_nexx_wt3020-8m.dts b/target/linux/ramips/dts/mt7620n_nexx_wt3020-8m.dts new file mode 100644 index 0000000000..9569703a36 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_nexx_wt3020-8m.dts @@ -0,0 +1,56 @@ +/dts-v1/; + +#include "mt7620n_nexx_wt3020.dtsi" + +/ { + compatible = "nexx,wt3020-8m", "nexx,wt3020", "ralink,mt7620n-soc"; + model = "Nexx WT3020 (8M)"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_nexx_wt3020.dtsi b/target/linux/ramips/dts/mt7620n_nexx_wt3020.dtsi new file mode 100644 index 0000000000..59558a2e96 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_nexx_wt3020.dtsi @@ -0,0 +1,61 @@ +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "nexx,wt3020", "ralink,mt7620n-soc"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "wt3020:blue:power"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_ravpower_wd03.dts b/target/linux/ramips/dts/mt7620n_ravpower_wd03.dts new file mode 100644 index 0000000000..bbb2ca3dc9 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_ravpower_wd03.dts @@ -0,0 +1,119 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "ravpower,wd03", "ralink,mt7620n-soc"; + model = "Ravpower WD03"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + green-wifi { + label = "wd03:green:wifi"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + }; + + + blue-wifi { + label = "wd03:blue:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&i2c { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4000>; + ralink,port-map = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wled", "ephy"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_vonets_var11n-300.dts b/target/linux/ramips/dts/mt7620n_vonets_var11n-300.dts new file mode 100644 index 0000000000..cf4b7c54a1 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_vonets_var11n-300.dts @@ -0,0 +1,100 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "vonets,var11n-300", "ralink,mt7620n-soc"; + model = "Vonets VAR11N-300"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "var11n-300:blue:system"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_wrtnode_wrtnode.dts b/target/linux/ramips/dts/mt7620n_wrtnode_wrtnode.dts new file mode 100644 index 0000000000..a808818201 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_wrtnode_wrtnode.dts @@ -0,0 +1,104 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include + +/ { + compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc"; + model = "WRTNODE"; + + aliases { + led-boot = &led_indicator; + led-failsafe = &led_indicator; + led-running = &led_indicator; + led-upgrade = &led_indicator; + }; + + leds { + compatible = "gpio-leds"; + + led_indicator: indicator { + label = "wrtnode:blue:indicator"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_zbtlink_zbt-cpe102.dts b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-cpe102.dts new file mode 100644 index 0000000000..6f0213bf70 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-cpe102.dts @@ -0,0 +1,129 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "zbtlink,zbt-cpe102", "ralink,mt7620n-soc"; + model = "Zbtlink ZBT-CPE102"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + + aliases { + led-boot = &led_4g_0; + led-failsafe = &led_4g_0; + }; + + leds { + compatible = "gpio-leds"; + + led_4g_0: 4g-0 { + label = "zbt-cpe102:green:4g-0"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + 4g-1 { + label = "zbt-cpe102:green:4g-1"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + 4g-2 { + label = "zbt-cpe102:green:4g-2"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + en25q64@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x760000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wa05.dts b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wa05.dts new file mode 100644 index 0000000000..21b56dcae1 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wa05.dts @@ -0,0 +1,132 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc"; + model = "Zbtlink ZBT-WA05"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "zbt-wa05:blue:power"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "zbt-wa05:blue:usb"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + air { + label = "zbt-wa05:blue:air"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + en25q64@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x760000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_zbtlink_zbt-we2026.dts b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-we2026.dts new file mode 100644 index 0000000000..be8d13be90 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-we2026.dts @@ -0,0 +1,113 @@ +/dts-v1/; + +#include +#include + +#include "mt7620n.dtsi" + +/ { + compatible = "zbtlink,zbt-we2026", "ralink,mt7620n-soc"; + model = "Zbtlink ZBT-WE2026"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "zbt-we2026:red:power"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "zbt-we2026:green:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + en25q64@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x760000>; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wr8305rt.dts b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wr8305rt.dts new file mode 100644 index 0000000000..5292c70dbb --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_zbtlink_zbt-wr8305rt.dts @@ -0,0 +1,126 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc"; + model = "Zbtlink ZBT-WR8305RT"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "zbt-wr8305rt:green:sys"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "zbt-wr8305rt:green:usb"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wifi { + label = "zbt-wr8305rt:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni-ii.dts b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni-ii.dts new file mode 100644 index 0000000000..765629548c --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni-ii.dts @@ -0,0 +1,152 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc"; + model = "ZyXEL Keenetic Omni II"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "kn_rc:green:wan"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "kn_rc:green:usb"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wifi { + label = "kn_rc:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "kn_rc:green:power"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + fn { + label = "fn"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb_power { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni.dts b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni.dts new file mode 100644 index 0000000000..74396d1fc2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni.dts @@ -0,0 +1,152 @@ +/dts-v1/; + +#include "mt7620n.dtsi" + +#include +#include + +/ { + compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc"; + model = "ZyXEL Keenetic Omni"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + wan { + label = "kn_rc:green:wan"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "kn_rc:green:usb"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + wifi { + label = "kn_rc:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "kn_rc:green:power"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + fn { + label = "fn"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb_power { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index f53f7dfe67..05d87b52ee 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -36,7 +36,7 @@ define Build/elx-header endef define Device/aigale_ai-br100 - DTS := AI-BR100 + MTK_SOC := mt7620a IMAGE_SIZE := 7936k DEVICE_VENDOR := Aigale DEVICE_MODEL := Ai-BR100 @@ -46,7 +46,7 @@ endef TARGET_DEVICES += aigale_ai-br100 define Device/alfa-network_ac1200rm - DTS := AC1200RM + MTK_SOC := mt7620a IMAGE_SIZE := 16064k DEVICE_VENDOR := ALFA Network DEVICE_MODEL := AC1200RM @@ -55,7 +55,7 @@ endef TARGET_DEVICES += alfa-network_ac1200rm define Device/alfa-network_tube-e4g - DTS := TUBE-E4G + MTK_SOC := mt7620a IMAGE_SIZE := 16064k DEVICE_VENDOR := ALFA Network DEVICE_MODEL := Tube-E4G @@ -74,6 +74,7 @@ define Device/amit_jboot endef define Device/Archer + MTK_SOC := mt7620a DEVICE_VENDOR := TP-Link TPLINK_HWREVADD := 0 TPLINK_HVERSION := 3 @@ -85,7 +86,6 @@ endef define Device/tplink_archer-c20i $(Device/Archer) - DTS := ArcherC20i TPLINK_FLASHLAYOUT := 8Mmtk TPLINK_HWID := 0xc2000001 TPLINK_HWREV := 58 @@ -99,7 +99,6 @@ TARGET_DEVICES += tplink_archer-c20i define Device/tplink_archer-c50-v1 $(Device/Archer) - DTS := ArcherC50 TPLINK_FLASHLAYOUT := 8Mmtk TPLINK_HWID := 0xc7500001 TPLINK_HWREV := 69 @@ -115,7 +114,6 @@ TARGET_DEVICES += tplink_archer-c50-v1 define Device/tplink_archer-mr200 $(Device/Archer) - DTS := ArcherMR200 TPLINK_FLASHLAYOUT := 8MLmtk TPLINK_HWID := 0xd7500001 TPLINK_HWREV := 0x4a @@ -126,7 +124,7 @@ endef TARGET_DEVICES += tplink_archer-mr200 define Device/bdcom_wap2100-sk - DTS := BDCOM-WAP2100-SK + MTK_SOC := mt7620a IMAGE_SIZE := 15808k DEVICE_VENDOR := BDCOM DEVICE_MODEL := WAP2100-SK (ZTE ZXECS EBG3130) @@ -135,7 +133,7 @@ endef TARGET_DEVICES += bdcom_wap2100-sk define Device/yukai_bocco - DTS := BOCCO + MTK_SOC := mt7620a DEVICE_VENDOR := YUKAI Engineering DEVICE_MODEL := BOCCO DEVICE_PACKAGES := kmod-sound-core kmod-sound-mt7620 kmod-i2c-ralink @@ -144,7 +142,7 @@ endef TARGET_DEVICES += yukai_bocco define Device/hnet_c108 - DTS := C108 + MTK_SOC := mt7620a IMAGE_SIZE := 16777216 DEVICE_VENDOR := HNET DEVICE_MODEL := C108 @@ -154,7 +152,7 @@ endef TARGET_DEVICES += hnet_c108 define Device/comfast_cf-wr800n - DTS := CF-WR800N + MTK_SOC := mt7620n DEVICE_VENDOR := Comfast DEVICE_MODEL := CF-WR800N SUPPORTED_DEVICES += cf-wr800n @@ -162,7 +160,7 @@ endef TARGET_DEVICES += comfast_cf-wr800n define Device/planex_cs-qr10 - DTS := CS-QR10 + MTK_SOC := mt7620a DEVICE_VENDOR := Planex DEVICE_MODEL := CS-QR10 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci \ @@ -173,7 +171,7 @@ endef TARGET_DEVICES += planex_cs-qr10 define Device/sanlinking_d240 - DTS := D240 + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Sanlinking Technologies DEVICE_MODEL := D240 @@ -183,7 +181,7 @@ endef TARGET_DEVICES += sanlinking_d240 define Device/planex_db-wrt01 - DTS := DB-WRT01 + MTK_SOC := mt7620a DEVICE_VENDOR := Planex DEVICE_MODEL := DB-WRT01 SUPPORTED_DEVICES += db-wrt01 @@ -192,7 +190,7 @@ TARGET_DEVICES += planex_db-wrt01 define Device/dlink_dch-m225 $(Device/seama) - DTS := DCH-M225 + MTK_SOC := mt7620a BLOCKSIZE := 4k SEAMA_SIGNATURE := wapn22_dlink.2013gui_dap1320b IMAGE_SIZE := 6848k @@ -204,7 +202,7 @@ endef TARGET_DEVICES += dlink_dch-m225 define Device/dlink_dir-810l - DTS := DIR-810L + MTK_SOC := mt7620a DEVICE_PACKAGES := kmod-mt76x0e DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-810L @@ -215,7 +213,7 @@ TARGET_DEVICES += dlink_dir-810l define Device/dlink_dir-510l $(Device/amit_jboot) - DTS := DIR-510L + MTK_SOC := mt7620a DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-510L DEVICE_PACKAGES += kmod-mt76x0e @@ -228,7 +226,7 @@ TARGET_DEVICES += dlink_dir-510l define Device/dlink_dwr-116-a1 $(Device/amit_jboot) - DTS := DWR-116-A1 + MTK_SOC := mt7620n DEVICE_VENDOR := D-Link DEVICE_MODEL := DWR-116 DEVICE_VARIANT := A1/A2 @@ -240,7 +238,7 @@ TARGET_DEVICES += dlink_dwr-116-a1 define Device/dlink_dwr-118-a1 $(Device/amit_jboot) - DTS := DWR-118-A1 + MTK_SOC := mt7620a DEVICE_VENDOR := D-Link DEVICE_MODEL := DWR-118 DEVICE_VARIANT := A1 @@ -253,7 +251,7 @@ TARGET_DEVICES += dlink_dwr-118-a1 define Device/dlink_dwr-118-a2 $(Device/amit_jboot) - DTS := DWR-118-A2 + MTK_SOC := mt7620a DEVICE_VENDOR := D-Link DEVICE_MODEL := DWR-118 DEVICE_VARIANT := A2 @@ -266,7 +264,7 @@ TARGET_DEVICES += dlink_dwr-118-a2 define Device/dlink_dwr-921-c1 $(Device/amit_jboot) - DTS := DWR-921-C1 + MTK_SOC := mt7620n IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := D-Link DEVICE_MODEL := DWR-921 @@ -280,6 +278,7 @@ TARGET_DEVICES += dlink_dwr-921-c1 define Device/dlink_dwr-921-c3 $(Device/dlink_dwr-921-c1) + DEVICE_DTS := mt7620n_dlink_dwr-921-c1 DEVICE_VENDOR := D-Link DEVICE_MODEL := DWR-921 DEVICE_VARIANT := C3 @@ -290,7 +289,7 @@ TARGET_DEVICES += dlink_dwr-921-c3 define Device/dlink_dwr-922-e2 $(Device/amit_jboot) - DTS := DWR-922-E2 + MTK_SOC := mt7620n IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := D-Link DEVICE_MODEL := DWR-922 @@ -303,7 +302,7 @@ endef TARGET_DEVICES += dlink_dwr-922-e2 define Device/linksys_e1700 - DTS := E1700 + MTK_SOC := mt7620a IMAGES += factory.bin IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \ umedia-header 0x013326 @@ -314,9 +313,9 @@ endef TARGET_DEVICES += linksys_e1700 define Device/netgear_ex2700 + MTK_SOC := mt7620a NETGEAR_HW_ID := 29764623+4+0+32+2x2+0 NETGEAR_BOARD_ID := EX2700 - DTS := EX2700 BLOCKSIZE := 4k IMAGE_SIZE := $(ralink_default_fw_size_4M) IMAGES += factory.bin @@ -330,8 +329,8 @@ endef TARGET_DEVICES += netgear_ex2700 define Device/netgear_ex3700 + MTK_SOC := mt7620a NETGEAR_BOARD_ID := U12H319T00_NETGEAR - DTS := EX3700 BLOCKSIZE := 4k IMAGE_SIZE := 7744k IMAGES += factory.chk @@ -344,7 +343,7 @@ endef TARGET_DEVICES += netgear_ex3700 define Device/glinet_gl-mt300a - DTS := GL-MT300A + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-MT300A @@ -354,7 +353,7 @@ endef TARGET_DEVICES += glinet_gl-mt300a define Device/kimax_u25awf-h1 - DTS := U25AWF-H1 + MTK_SOC := mt7620a IMAGE_SIZE := 16064k DEVICE_VENDOR := Kimax DEVICE_MODEL := U25AWF @@ -365,7 +364,7 @@ endef TARGET_DEVICES += kimax_u25awf-h1 define Device/glinet_gl-mt300n - DTS := GL-MT300N + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-MT300N @@ -375,7 +374,7 @@ endef TARGET_DEVICES += glinet_gl-mt300n define Device/glinet_gl-mt750 - DTS := GL-MT750 + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-MT750 @@ -385,7 +384,7 @@ endef TARGET_DEVICES += glinet_gl-mt750 define Device/hiwifi_hc5661 - DTS := HC5661 + MTK_SOC := mt7620a IMAGE_SIZE := 15872k DEVICE_VENDOR := HiWiFi DEVICE_MODEL := HC5661 @@ -395,7 +394,7 @@ endef TARGET_DEVICES += hiwifi_hc5661 define Device/hiwifi_hc5761 - DTS := HC5761 + MTK_SOC := mt7620a IMAGE_SIZE := 15872k DEVICE_VENDOR := HiWiFi DEVICE_MODEL := HC5761 @@ -405,7 +404,7 @@ endef TARGET_DEVICES += hiwifi_hc5761 define Device/hiwifi_hc5861 - DTS := HC5861 + MTK_SOC := mt7620a IMAGE_SIZE := 15872k DEVICE_VENDOR := HiWiFi DEVICE_MODEL := HC5861 @@ -415,7 +414,7 @@ endef TARGET_DEVICES += hiwifi_hc5861 define Device/head-weblink_hdrm200 - DTS := HDRM200 + MTK_SOC := mt7620a IMAGE_SIZE := 16064k DEVICE_VENDOR := Head Weblink DEVICE_MODEL := HDRM2000 @@ -425,7 +424,7 @@ endef TARGET_DEVICES += head-weblink_hdrm200 define Device/iodata_wn-ac1167gr - DTS := WN-AC1167GR + MTK_SOC := mt7620a DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AC1167GR IMAGE_SIZE := 6864k @@ -438,7 +437,7 @@ endef TARGET_DEVICES += iodata_wn-ac1167gr define Device/iodata_wn-ac733gr3 - DTS := WN-AC733GR3 + MTK_SOC := mt7620a DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AC733GR3 IMAGE_SIZE := 6992k @@ -451,7 +450,7 @@ endef TARGET_DEVICES += iodata_wn-ac733gr3 define Device/kimax_u35wf - DTS := U35WF + MTK_SOC := mt7620n IMAGE_SIZE := 16064k DEVICE_VENDOR := Kimax DEVICE_MODEL := U35WF @@ -460,7 +459,7 @@ endef TARGET_DEVICES += kimax_u35wf define Device/zyxel_keenetic-viva - DTS := kng_rc + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := ZyXEL DEVICE_MODEL := Keenetic Viva @@ -473,7 +472,7 @@ endef TARGET_DEVICES += zyxel_keenetic-viva define Device/zyxel_keenetic-omni - DTS := kn_rc + MTK_SOC := mt7620n DEVICE_VENDOR := ZyXEL DEVICE_MODEL := Keenetic Omni DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport @@ -485,7 +484,7 @@ endef TARGET_DEVICES += zyxel_keenetic-omni define Device/zyxel_keenetic-omni-ii - DTS := kn_rf + MTK_SOC := mt7620n DEVICE_VENDOR := ZyXEL DEVICE_MODEL := Keenetic Omni II DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport @@ -497,7 +496,7 @@ endef TARGET_DEVICES += zyxel_keenetic-omni-ii define Device/microduino_microwrt - DTS := MicroWRT + MTK_SOC := mt7620a IMAGE_SIZE := 16128k DEVICE_VENDOR := Microduino DEVICE_MODEL := MicroWRT @@ -508,7 +507,7 @@ TARGET_DEVICES += microduino_microwrt define Device/lava_lr-25g001 $(Device/amit_jboot) - DTS := LR-25G001 + MTK_SOC := mt7620a DEVICE_VENDOR := LAVA DEVICE_MODEL := LR-25G001 DLINK_ROM_ID := LVA6E3804001 @@ -519,7 +518,7 @@ endef TARGET_DEVICES += lava_lr-25g001 define Device/xiaomi_miwifi-mini - DTS := MIWIFI-MINI + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Xiaomi DEVICE_MODEL := MiWiFi Mini @@ -529,7 +528,7 @@ endef TARGET_DEVICES += xiaomi_miwifi-mini define Device/kingston_mlw221 - DTS := MLW221 + MTK_SOC := mt7620n IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Kingston DEVICE_MODEL := MLW221 @@ -539,7 +538,7 @@ endef TARGET_DEVICES += kingston_mlw221 define Device/kingston_mlwg2 - DTS := MLWG2 + MTK_SOC := mt7620n IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Kingston DEVICE_MODEL := MLWG2 @@ -549,14 +548,14 @@ endef TARGET_DEVICES += kingston_mlwg2 define Device/ralink_mt7620a-evb - DTS := MT7620a + MTK_SOC := mt7620a DEVICE_VENDOR := MediaTek DEVICE_MODEL := MT7620a EVB endef TARGET_DEVICES += ralink_mt7620a-evb define Device/ralink_mt7620a-mt7530-evb - DTS := MT7620a_MT7530 + MTK_SOC := mt7620a DEVICE_VENDOR := MediaTek DEVICE_MODEL := MT7620a + MT7530 EVB SUPPORTED_DEVICES += mt7620a_mt7530 @@ -564,7 +563,7 @@ endef TARGET_DEVICES += ralink_mt7620a-mt7530-evb define Device/ralink_mt7620a-mt7610e-evb - DTS := MT7620a_MT7610e + MTK_SOC := mt7620a DEVICE_VENDOR := MediaTek DEVICE_MODEL := MT7620a + MT7610e EVB DEVICE_PACKAGES := kmod-mt76x0e @@ -573,7 +572,7 @@ endef TARGET_DEVICES += ralink_mt7620a-mt7610e-evb define Device/ralink_mt7620a-v22sg-evb - DTS := MT7620a_V22SG + MTK_SOC := mt7620a DEVICE_VENDOR := MediaTek DEVICE_MODEL := MT7620a V22SG SUPPORTED_DEVICES += mt7620a_v22sg @@ -581,7 +580,7 @@ endef TARGET_DEVICES += ralink_mt7620a-v22sg-evb define Device/planex_mzk-750dhp - DTS := MZK-750DHP + MTK_SOC := mt7620a DEVICE_VENDOR := Planex DEVICE_MODEL := MZK-750DHP DEVICE_PACKAGES := kmod-mt76x0e @@ -590,7 +589,7 @@ endef TARGET_DEVICES += planex_mzk-750dhp define Device/planex_mzk-ex300np - DTS := MZK-EX300NP + MTK_SOC := mt7620a DEVICE_VENDOR := Planex DEVICE_MODEL := MZK-EX300NP SUPPORTED_DEVICES += mzk-ex300np @@ -598,7 +597,7 @@ endef TARGET_DEVICES += planex_mzk-ex300np define Device/planex_mzk-ex750np - DTS := MZK-EX750NP + MTK_SOC := mt7620a DEVICE_VENDOR := Planex DEVICE_MODEL := MZK-EX750NP DEVICE_PACKAGES := kmod-mt76x2 @@ -607,7 +606,7 @@ endef TARGET_DEVICES += planex_mzk-ex750np define Device/sercomm_na930 - DTS := NA930 + MTK_SOC := mt7620a IMAGE_SIZE := 20m DEVICE_VENDOR := Sercomm DEVICE_MODEL := NA930 @@ -617,7 +616,7 @@ endef TARGET_DEVICES += sercomm_na930 define Device/ohyeah_oy-0001 - DTS := OY-0001 + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Oh Yeah DEVICE_MODEL := OY-0001 @@ -627,7 +626,7 @@ endef TARGET_DEVICES += ohyeah_oy-0001 define Device/phicomm_psg1208 - DTS := PSG1208 + MTK_SOC := mt7620a DEVICE_VENDOR := Phicomm DEVICE_MODEL := PSG1208 DEVICE_PACKAGES := kmod-mt76x2 @@ -636,7 +635,7 @@ endef TARGET_DEVICES += phicomm_psg1208 define Device/phicomm_psg1218a - DTS := PSG1218A + MTK_SOC := mt7620a DEVICE_VENDOR := Phicomm DEVICE_MODEL := PSG1218 DEVICE_VARIANT:= Ax @@ -646,7 +645,7 @@ endef TARGET_DEVICES += phicomm_psg1218a define Device/phicomm_psg1218b - DTS := PSG1218B + MTK_SOC := mt7620a DEVICE_VENDOR := Phicomm DEVICE_MODEL := PSG1218 DEVICE_VARIANT := Bx @@ -656,7 +655,7 @@ endef TARGET_DEVICES += phicomm_psg1218b define Device/phicomm_k2g - DTS := K2G + MTK_SOC := mt7620a IMAGE_SIZE := 7552k DEVICE_VENDOR := Phicomm DEVICE_MODEL := K2G @@ -665,7 +664,7 @@ endef TARGET_DEVICES += phicomm_k2g define Device/asus_rp-n53 - DTS := RP-N53 + MTK_SOC := mt7620a DEVICE_VENDOR := Asus DEVICE_MODEL := RP-N53 DEVICE_PACKAGES := kmod-rt2800-pci @@ -674,7 +673,7 @@ endef TARGET_DEVICES += asus_rp-n53 define Device/asus_rt-n12p - DTS := RT-N12-PLUS + MTK_SOC := mt7620n DEVICE_VENDOR := Asus DEVICE_MODEL := RT-N11P/RT-N12+/RT-N12Eb1 SUPPORTED_DEVICES += rt-n12p @@ -682,7 +681,7 @@ endef TARGET_DEVICES += asus_rt-n12p define Device/asus_rt-n14u - DTS := RT-N14U + MTK_SOC := mt7620n DEVICE_VENDOR := Asus DEVICE_MODEL := RT-N14u DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci @@ -691,7 +690,7 @@ endef TARGET_DEVICES += asus_rt-n14u define Device/asus_rt-ac51u - DTS := RT-AC51U + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Asus DEVICE_MODEL := RT-AC51U @@ -701,7 +700,7 @@ endef TARGET_DEVICES += asus_rt-ac51u define Device/dovado_tiny-ac - DTS := TINY-AC + MTK_SOC := mt7620a DEVICE_VENDOR := Dovado DEVICE_MODEL := Tiny AC DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci @@ -710,7 +709,7 @@ endef TARGET_DEVICES += dovado_tiny-ac define Device/edimax_br-6478ac-v2 - DTS := BR-6478AC-V2 + MTK_SOC := mt7620a DEVICE_VENDOR := Edimax DEVICE_MODEL := BR-6478AC DEVICE_VARIANT := V2 @@ -724,7 +723,7 @@ endef TARGET_DEVICES += edimax_br-6478ac-v2 define Device/edimax_ew-7476rpc - DTS := EW-7476RPC + MTK_SOC := mt7620a DEVICE_VENDOR := Edimax DEVICE_MODEL := EW-7476RPC BLOCKSIZE := 4k @@ -737,7 +736,7 @@ endef TARGET_DEVICES += edimax_ew-7476rpc define Device/edimax_ew-7478ac - DTS := EW-7478AC + MTK_SOC := mt7620a DEVICE_VENDOR := Edimax DEVICE_MODEL := EW-7478AC BLOCKSIZE := 4k @@ -750,7 +749,7 @@ endef TARGET_DEVICES += edimax_ew-7478ac define Device/edimax_ew-7478apc - DTS := EW-7478APC + MTK_SOC := mt7620a DEVICE_VENDOR := Edimax DEVICE_MODEL := EW-7478APC BLOCKSIZE := 4k @@ -764,7 +763,6 @@ TARGET_DEVICES += edimax_ew-7478apc define Device/tplink_archer-c2-v1 $(Device/Archer) - DTS := ArcherC2-v1 SUPPORTED_DEVICES += tplink,c2-v1 TPLINK_FLASHLAYOUT := 8Mmtk TPLINK_HWID := 0xc7500001 @@ -778,7 +776,6 @@ TARGET_DEVICES += tplink_archer-c2-v1 define Device/tplink_archer-c20-v1 $(Device/Archer) - DTS := ArcherC20v1 SUPPORTED_DEVICES += tplink,c20-v1 TPLINK_FLASHLAYOUT := 8Mmtk TPLINK_HWID := 0xc2000001 @@ -792,7 +789,7 @@ endef TARGET_DEVICES += tplink_archer-c20-v1 define Device/vonets_var11n-300 - DTS := VAR11N-300 + MTK_SOC := mt7620n IMAGE_SIZE := $(ralink_default_fw_size_4M) BLOCKSIZE := 4k DEVICE_VENDOR := Vonets @@ -801,7 +798,7 @@ endef TARGET_DEVICES += vonets_var11n-300 define Device/ravpower_wd03 - DTS := WD03 + MTK_SOC := mt7620n IMAGE_SIZE := $(ralink_default_fw_size_8M) DEVICE_VENDOR := Ravpower DEVICE_MODEL := WD03 @@ -810,7 +807,7 @@ endef TARGET_DEVICES += ravpower_wd03 define Device/buffalo_whr-1166d - DTS := WHR-1166D + MTK_SOC := mt7620a IMAGE_SIZE := 15040k DEVICE_VENDOR := Buffalo DEVICE_MODEL := WHR-1166D @@ -820,7 +817,7 @@ endef TARGET_DEVICES += buffalo_whr-1166d define Device/buffalo_whr-300hp2 - DTS := WHR-300HP2 + MTK_SOC := mt7620a IMAGE_SIZE := 6848k DEVICE_VENDOR := Buffalo DEVICE_MODEL := WHR-300HP2 @@ -829,7 +826,7 @@ endef TARGET_DEVICES += buffalo_whr-300hp2 define Device/buffalo_whr-600d - DTS := WHR-600D + MTK_SOC := mt7620a IMAGE_SIZE := 6848k DEVICE_VENDOR := Buffalo DEVICE_MODEL := WHR-600D @@ -839,7 +836,7 @@ endef TARGET_DEVICES += buffalo_whr-600d define Device/buffalo_wmr-300 - DTS := WMR-300 + MTK_SOC := mt7620n DEVICE_VENDOR := Buffalo DEVICE_MODEL := WMR-300 SUPPORTED_DEVICES += wmr-300 @@ -847,9 +844,9 @@ endef TARGET_DEVICES += buffalo_wmr-300 define Device/netgear_wn3000rp-v3 + MTK_SOC := mt7620a NETGEAR_HW_ID := 29764836+8+0+32+2x2+0 NETGEAR_BOARD_ID := WN3000RPv3 - DTS := WN3000RPV3 BLOCKSIZE := 4k IMAGES += factory.bin KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakehdr filesystem @@ -863,7 +860,7 @@ endef TARGET_DEVICES += netgear_wn3000rp-v3 define Device/elecom_wrh-300cr - DTS := WRH-300CR + MTK_SOC := mt7620n IMAGE_SIZE := $(ralink_default_fw_size_16M) IMAGES += factory.bin IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \ @@ -876,7 +873,7 @@ endef TARGET_DEVICES += elecom_wrh-300cr define Device/wrtnode_wrtnode - DTS := WRTNODE + MTK_SOC := mt7620n IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := WRTNode DEVICE_MODEL := WRTNode @@ -886,7 +883,7 @@ endef TARGET_DEVICES += wrtnode_wrtnode define Device/nexx_wt3020-4m - DTS := WT3020-4M + MTK_SOC := mt7620n BLOCKSIZE := 4k IMAGE_SIZE := $(ralink_default_fw_size_4M) IMAGES += factory.bin @@ -900,7 +897,7 @@ endef TARGET_DEVICES += nexx_wt3020-4m define Device/nexx_wt3020-8m - DTS := WT3020-8M + MTK_SOC := mt7620n IMAGES += factory.bin IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \ poray-header -B WT3020 -F 8M @@ -913,7 +910,7 @@ endef TARGET_DEVICES += nexx_wt3020-8m define Device/lenovo_newifi-y1 - DTS := Y1 + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Lenovo DEVICE_MODEL := Y1 @@ -923,7 +920,7 @@ endef TARGET_DEVICES += lenovo_newifi-y1 define Device/lenovo_newifi-y1s - DTS := Y1S + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Lenovo DEVICE_MODEL := Y1S @@ -933,7 +930,7 @@ endef TARGET_DEVICES += lenovo_newifi-y1s define Device/youku_yk1 - DTS := YOUKU-YK1 + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_32M) DEVICE_VENDOR := YOUKU DEVICE_MODEL := YK1 @@ -943,7 +940,7 @@ endef TARGET_DEVICES += youku_yk1 define Device/zbtlink_we1026-5g-16m - DTS := WE1026-5G-16M + MTK_SOC := mt7620a IMAGE_SIZE := 16777216 DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-WE1026-5G @@ -954,7 +951,7 @@ endef TARGET_DEVICES += zbtlink_we1026-5g-16m define Device/zbtlink_zbt-ape522ii - DTS := ZBT-APE522II + MTK_SOC := mt7620a DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-APE522II DEVICE_PACKAGES := kmod-mt76x2 @@ -963,7 +960,7 @@ endef TARGET_DEVICES += zbtlink_zbt-ape522ii define Device/zbtlink_zbt-cpe102 - DTS := ZBT-CPE102 + MTK_SOC := mt7620n DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-CPE102 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci @@ -972,7 +969,7 @@ endef TARGET_DEVICES += zbtlink_zbt-cpe102 define Device/zbtlink_zbt-wa05 - DTS := ZBT-WA05 + MTK_SOC := mt7620n DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-WA05 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci @@ -981,7 +978,7 @@ endef TARGET_DEVICES += zbtlink_zbt-wa05 define Device/zbtlink_zbt-we2026 - DTS := ZBT-WE2026 + MTK_SOC := mt7620n DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-WE2026 SUPPORTED_DEVICES += zbt-we2026 @@ -989,7 +986,7 @@ endef TARGET_DEVICES += zbtlink_zbt-we2026 define Device/zbtlink_zbt-we826-16m - DTS := ZBT-WE826-16M + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-WE826 @@ -1000,7 +997,7 @@ endef TARGET_DEVICES += zbtlink_zbt-we826-16m define Device/zbtlink_zbt-we826-32m - DTS := ZBT-WE826-32M + MTK_SOC := mt7620a IMAGE_SIZE := $(ralink_default_fw_size_32M) DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-WE826 @@ -1011,7 +1008,7 @@ endef TARGET_DEVICES += zbtlink_zbt-we826-32m define Device/zbtlink_zbt-we826-e - DTS := ZBT-WE826-E + MTK_SOC := mt7620a IMAGE_SIZE := 32448k DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-WE826-E @@ -1021,7 +1018,7 @@ endef TARGET_DEVICES += zbtlink_zbt-we826-e define Device/zbtlink_zbt-wr8305rt - DTS := ZBT-WR8305RT + MTK_SOC := mt7620n DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-WR8305RT DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci @@ -1030,7 +1027,7 @@ endef TARGET_DEVICES += zbtlink_zbt-wr8305rt define Device/zte_q7 - DTS := ZTE-Q7 + MTK_SOC := mt7620a DEVICE_VENDOR := ZTE DEVICE_MODEL := Q7 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci