From: Andrew Duggan Date: Thu, 10 Mar 2016 23:59:52 +0000 (-0800) Subject: Input: synaptics-rmi4 - add device tree support to the SPI transport driver X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=48147b9768b83265bf2e1211bcadeca035011380;p=openwrt%2Fstaging%2Fblogic.git Input: synaptics-rmi4 - add device tree support to the SPI transport driver Add devicetree binding for SPI devices. Signed-off-by: Andrew Duggan Acked-by: Rob Herring Tested-by: Benjamin Tissoires Tested-by: Linus Walleij Tested-by: Bjorn Andersson Signed-off-by: Dmitry Torokhov --- diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt new file mode 100644 index 000000000000..a4ca7828f21d --- /dev/null +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt @@ -0,0 +1,57 @@ +Synaptics RMI4 SPI Device Binding + +The Synaptics RMI4 core is able to support RMI4 devices using different +transports and different functions. This file describes the device tree +bindings for devices using the SPI transport driver. Complete documentation +for other transports and functions can be found in +Documentation/devicetree/bindings/input/rmi4. + +Required Properties: +- compatible: syna,rmi4-spi +- reg: Chip select address for the device +- #address-cells: Set to 1 to indicate that the function child nodes + consist of only on uint32 value. +- #size-cells: Set to 0 to indicate that the function child nodes do not + have a size property. + +Optional Properties: +- interrupts: interrupt which the rmi device is connected to. +- interrupt-parent: The interrupt controller. +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +- spi-rx-delay-us: microsecond delay after a read transfer. +- spi-tx-delay-us: microsecond delay after a write transfer. + +Function Parameters: +Parameters specific to RMI functions are contained in child nodes of the rmi device + node. Documentation for the parameters of each function can be found in: +Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. + + + +Example: + spi@7000d800 { + rmi4-spi-dev@0 { + compatible = "syna,rmi4-spi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <4000000>; + spi-cpha; + spi-cpol; + interrupt-parent = <&gpio>; + interrupts = ; + spi-rx-delay-us = <30>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-y; + syna,sensor-type = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index bbaa857dd68f..42d595425dfb 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -61,6 +61,8 @@ contain the following properties. used for MOSI. Defaults to 1 if not present. - spi-rx-bus-width - (optional) The bus width(number of data wires) that used for MISO. Defaults to 1 if not present. +- spi-rx-delay-us - (optional) Microsecond delay after a read transfer. +- spi-tx-delay-us - (optional) Microsecond delay after a write transfer. Some SPI controllers and devices support Dual and Quad SPI transfer mode. It allows data in the SPI system to be transferred in 2 wires(DUAL) or 4 wires(QUAD). diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c index 4319c634553f..55bd1b34970c 100644 --- a/drivers/input/rmi4/rmi_spi.c +++ b/drivers/input/rmi4/rmi_spi.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "rmi_driver.h" #define RMI_SPI_DEFAULT_XFER_BUF_SIZE 64 @@ -360,6 +361,41 @@ static int rmi_spi_init_irq(struct spi_device *spi) return 0; } +#ifdef CONFIG_OF +static int rmi_spi_of_probe(struct spi_device *spi, + struct rmi_device_platform_data *pdata) +{ + struct device *dev = &spi->dev; + int retval; + + retval = rmi_of_property_read_u32(dev, + &pdata->spi_data.read_delay_us, + "spi-rx-delay-us", 1); + if (retval) + return retval; + + retval = rmi_of_property_read_u32(dev, + &pdata->spi_data.write_delay_us, + "spi-tx-delay-us", 1); + if (retval) + return retval; + + return 0; +} + +static const struct of_device_id rmi_spi_of_match[] = { + { .compatible = "syna,rmi4-spi" }, + {}, +}; +MODULE_DEVICE_TABLE(of, rmi_spi_of_match); +#else +static inline int rmi_spi_of_probe(struct spi_device *spi, + struct rmi_device_platform_data *pdata) +{ + return -ENODEV; +} +#endif + static int rmi_spi_probe(struct spi_device *spi) { struct rmi_spi_xport *rmi_spi; @@ -377,8 +413,13 @@ static int rmi_spi_probe(struct spi_device *spi) pdata = &rmi_spi->xport.pdata; - if (spi_pdata) + if (spi->dev.of_node) { + retval = rmi_spi_of_probe(spi, pdata); + if (retval) + return retval; + } else if (spi_pdata) { *pdata = *spi_pdata; + } if (pdata->spi_data.bits_per_word) spi->bits_per_word = pdata->spi_data.bits_per_word; @@ -532,6 +573,7 @@ static struct spi_driver rmi_spi_driver = { .driver = { .name = "rmi4_spi", .pm = &rmi_spi_pm, + .of_match_table = of_match_ptr(rmi_spi_of_match), }, .id_table = rmi_id, .probe = rmi_spi_probe,