From: Thomas Bogendoerfer Date: Wed, 9 Jan 2019 14:09:02 +0000 (+0100) Subject: scsi: qla1280: set 64bit coherent mask X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4a01ab60f55041b1ccc760e43258a5b3aeeca1bc;p=openwrt%2Fstaging%2Fblogic.git scsi: qla1280: set 64bit coherent mask After Commit 54aed4dd3526 ("MIPS: IP27: use dma_direct_ops") qla1280 driver failed on SGI IP27 machines with qla1280: QLA1040 found on PCI bus 0, dev 0 qla1280 0000:00:00.0: enabling device (0006 -> 0007) qla1280: Failed to get request memory qla1280: probe of 0000:00:00.0 failed with error -12 Reason is that SGI IP27 always generates 64bit DMA addresses and has no fallback mode for 32bit DMA addresses implemented. QLA1280 supports 64bit addressing for all DMA accesses so setting coherent mask to 64bit fixes the issue. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index a414f51302b7..6856dfdfa473 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -4248,7 +4248,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->devnum = devnum; /* specifies microcode load address */ #ifdef QLA_64BIT_PTR - if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(64))) { + if (dma_set_mask_and_coherent(&ha->pdev->dev, DMA_BIT_MASK(64))) { if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n", ha->host_no);