From: Libin Yang Date: Wed, 2 Sep 2015 06:11:39 +0000 (+0800) Subject: drm/i915: implement sync_audio_rate callback X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4a21ef7d1d2b19fdd986783e9ef53bd15fdc87bf;p=openwrt%2Fstaging%2Fblogic.git drm/i915: implement sync_audio_rate callback HDMI audio may not work at some frequencies with the HW provided N/CTS. This patch sets the proper N value for the given audio sample rate at the impacted frequencies. At other frequencies, it will use the N/CTS value which HW provides. Signed-off-by: Libin Yang Reviewed-by: Jani Nikula Signed-off-by: Takashi Iwai --- diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index ab37d1121be8..990f656e6ab0 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -832,6 +832,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) mutex_init(&dev_priv->sb_lock); mutex_init(&dev_priv->modeset_restore_lock); mutex_init(&dev_priv->csr_lock); + mutex_init(&dev_priv->av_mutex); intel_pm_setup(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index e1db8de52851..22dd7043c9ef 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1885,6 +1885,11 @@ struct drm_i915_private { /* hda/i915 audio component */ struct i915_audio_component *audio_component; bool audio_component_registered; + /** + * av_mutex - mutex for audio/video sync + * + */ + struct mutex av_mutex; uint32_t hw_context_size; struct list_head context_list; diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 89c1a8ce1f98..c5922f902aaf 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -68,6 +68,31 @@ static const struct { { 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 }, }; +/* HDMI N/CTS table */ +#define TMDS_297M 297000 +#define TMDS_296M DIV_ROUND_UP(297000 * 1000, 1001) +static const struct { + int sample_rate; + int clock; + int n; + int cts; +} aud_ncts[] = { + { 44100, TMDS_296M, 4459, 234375 }, + { 44100, TMDS_297M, 4704, 247500 }, + { 48000, TMDS_296M, 5824, 281250 }, + { 48000, TMDS_297M, 5120, 247500 }, + { 32000, TMDS_296M, 5824, 421875 }, + { 32000, TMDS_297M, 3072, 222750 }, + { 88200, TMDS_296M, 8918, 234375 }, + { 88200, TMDS_297M, 9408, 247500 }, + { 96000, TMDS_296M, 11648, 281250 }, + { 96000, TMDS_297M, 10240, 247500 }, + { 176400, TMDS_296M, 17836, 234375 }, + { 176400, TMDS_297M, 18816, 247500 }, + { 192000, TMDS_296M, 23296, 281250 }, + { 192000, TMDS_297M, 20480, 247500 }, +}; + /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */ static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode) { @@ -90,6 +115,31 @@ static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode) return hdmi_audio_clock[i].config; } +static int audio_config_get_n(const struct drm_display_mode *mode, int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) { + if ((rate == aud_ncts[i].sample_rate) && + (mode->clock == aud_ncts[i].clock)) { + return aud_ncts[i].n; + } + } + return 0; +} + +/* check whether N/CTS/M need be set manually */ +static bool audio_rate_need_prog(struct intel_crtc *crtc, + struct drm_display_mode *mode) +{ + if (((mode->clock == TMDS_297M) || + (mode->clock == TMDS_296M)) && + intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) + return true; + else + return false; +} + static bool intel_eld_uptodate(struct drm_connector *connector, int reg_eldv, uint32_t bits_eldv, int reg_elda, uint32_t bits_elda, @@ -184,6 +234,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder) DRM_DEBUG_KMS("Disable audio codec on pipe %c\n", pipe_name(pipe)); + mutex_lock(&dev_priv->av_mutex); + /* Disable timestamps */ tmp = I915_READ(HSW_AUD_CFG(pipe)); tmp &= ~AUD_CONFIG_N_VALUE_INDEX; @@ -199,6 +251,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder) tmp &= ~AUDIO_ELD_VALID(pipe); tmp &= ~AUDIO_OUTPUT_ENABLE(pipe); I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); + + mutex_unlock(&dev_priv->av_mutex); } static void hsw_audio_codec_enable(struct drm_connector *connector, @@ -215,6 +269,8 @@ static void hsw_audio_codec_enable(struct drm_connector *connector, DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n", pipe_name(pipe), drm_eld_size(eld)); + mutex_lock(&dev_priv->av_mutex); + /* Enable audio presence detect, invalidate ELD */ tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); tmp |= AUDIO_OUTPUT_ENABLE(pipe); @@ -253,6 +309,8 @@ static void hsw_audio_codec_enable(struct drm_connector *connector, else tmp |= audio_config_hdmi_pixel_clock(mode); I915_WRITE(HSW_AUD_CFG(pipe), tmp); + + mutex_unlock(&dev_priv->av_mutex); } static void ilk_audio_codec_disable(struct intel_encoder *encoder) @@ -527,12 +585,92 @@ static int i915_audio_component_get_cdclk_freq(struct device *dev) return ret; } +static int i915_audio_component_sync_audio_rate(struct device *dev, + int port, int rate) +{ + struct drm_i915_private *dev_priv = dev_to_i915(dev); + struct drm_device *drm_dev = dev_priv->dev; + struct intel_encoder *intel_encoder; + struct intel_digital_port *intel_dig_port; + struct intel_crtc *crtc; + struct drm_display_mode *mode; + enum pipe pipe = -1; + u32 tmp; + int n_low, n_up, n; + + /* HSW, BDW SKL need this fix */ + if (!IS_SKYLAKE(dev_priv) && + !IS_BROADWELL(dev_priv) && + !IS_HASWELL(dev_priv)) + return 0; + + mutex_lock(&dev_priv->av_mutex); + /* 1. get the pipe */ + for_each_intel_encoder(drm_dev, intel_encoder) { + if (intel_encoder->type != INTEL_OUTPUT_HDMI) + continue; + intel_dig_port = enc_to_dig_port(&intel_encoder->base); + if (port == intel_dig_port->port) { + crtc = to_intel_crtc(intel_encoder->base.crtc); + if (!crtc) { + DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__); + continue; + } + pipe = crtc->pipe; + break; + } + } + + if (pipe == INVALID_PIPE) { + DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port)); + mutex_unlock(&dev_priv->av_mutex); + return -ENODEV; + } + DRM_DEBUG_KMS("pipe %c connects port %c\n", + pipe_name(pipe), port_name(port)); + mode = &crtc->config->base.adjusted_mode; + + /* 2. check whether to set the N/CTS/M manually or not */ + if (!audio_rate_need_prog(crtc, mode)) { + tmp = I915_READ(HSW_AUD_CFG(pipe)); + tmp &= ~AUD_CONFIG_N_PROG_ENABLE; + I915_WRITE(HSW_AUD_CFG(pipe), tmp); + mutex_unlock(&dev_priv->av_mutex); + return 0; + } + + n = audio_config_get_n(mode, rate); + if (n == 0) { + DRM_DEBUG_KMS("Using automatic mode for N value on port %c\n", + port_name(port)); + tmp = I915_READ(HSW_AUD_CFG(pipe)); + tmp &= ~AUD_CONFIG_N_PROG_ENABLE; + I915_WRITE(HSW_AUD_CFG(pipe), tmp); + mutex_unlock(&dev_priv->av_mutex); + return 0; + } + n_low = n & 0xfff; + n_up = (n >> 12) & 0xff; + + /* 4. set the N/CTS/M */ + tmp = I915_READ(HSW_AUD_CFG(pipe)); + tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK); + tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) | + (n_low << AUD_CONFIG_LOWER_N_SHIFT) | + AUD_CONFIG_N_PROG_ENABLE); + I915_WRITE(HSW_AUD_CFG(pipe), tmp); + + mutex_unlock(&dev_priv->av_mutex); + return 0; +} + static const struct i915_audio_component_ops i915_audio_component_ops = { .owner = THIS_MODULE, .get_power = i915_audio_component_get_power, .put_power = i915_audio_component_put_power, .codec_wake_override = i915_audio_component_codec_wake_override, .get_cdclk_freq = i915_audio_component_get_cdclk_freq, + .sync_audio_rate = i915_audio_component_sync_audio_rate, }; static int i915_audio_component_bind(struct device *i915_dev,