From: Shiji Yang Date: Sun, 16 May 2021 13:21:09 +0000 (+0800) Subject: ramips: split Youku YK1 to YK-L1 and YK-L1c X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4a9f389ed2dcee18a5c5e1f0d4e5c406f9290579;p=openwrt%2Fstaging%2Flinusw.git ramips: split Youku YK1 to YK-L1 and YK-L1c Device specifications: * Model: Youku YK-L1/L1c * CPU: MT7620A * RAM: 128 MiB * Flash: 32 MiB (YK-L1)/ 16 MiB (YK-L1c) * LAN: 2* 10M/100M Ports * WAN: 1* 10M/100M Port * USB: 1* USB2.0 * SD: 1* MicroSD socket * UART: 1* TTL, Baudrate 57600 Descriptions: Previous supported device YOUKU yk1 is actually Youku YK-L1. Though they look really different, the only hardware difference between the two models is flash size, YK-L1 has 32 MiB flash but YK-L1c has 16MiB. It seems that YK-L1c can compatible with YK-L1's firmware but it's better to split it to different models. It is easy to identify the models by looking at the label on the bottom of the device. The label has the model number "YK-L1" or "YK-L1c". Due to different flash sizes, YK-L1c that using previous YK-L1's firmware needs to apply "force update" to install compatible firmware, so please backup config file before system upgrade. Signed-off-by: Shiji Yang [use more specific name for DTSI] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/mt7620a_youku_yk-l1.dts b/target/linux/ramips/dts/mt7620a_youku_yk-l1.dts new file mode 100644 index 0000000000..5155318b0c --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_youku_yk-l1.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a_youku_yk-l1.dtsi" + +/ { + compatible = "youku,yk-l1", "ralink,mt7620a-soc"; + model = "Youku YK-L1"; +}; + +&firmware { + reg = <0x50000 0x1fb0000>; +}; diff --git a/target/linux/ramips/dts/mt7620a_youku_yk-l1.dtsi b/target/linux/ramips/dts/mt7620a_youku_yk-l1.dtsi new file mode 100644 index 0000000000..61062a3179 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_youku_yk-l1.dtsi @@ -0,0 +1,126 @@ +#include "mt7620a.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = ðernet; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "blue:wlan"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + usb { + label = "blue:usb"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led_power: power { + label = "blue:power"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + firmware: partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + /* reg property is set based on flash size in DTS files */ + }; + }; + }; +}; + +&state_default { + default { + groups = "i2c", "rgmii1", "wled"; + function = "gpio"; + }; +}; + +ðernet { + pinctrl-names = "default"; + + mtd-mac-address = <&factory 0x28>; + + mediatek,portmap = "llllw"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/dts/mt7620a_youku_yk-l1c.dts b/target/linux/ramips/dts/mt7620a_youku_yk-l1c.dts new file mode 100644 index 0000000000..c59f0101bd --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_youku_yk-l1c.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a_youku_yk-l1.dtsi" + +/ { + compatible = "youku,yk-l1c", "ralink,mt7620a-soc"; + model = "Youku YK-L1c"; +}; + +&firmware { + reg = <0x50000 0xfb0000>; +}; diff --git a/target/linux/ramips/dts/mt7620a_youku_yk1.dts b/target/linux/ramips/dts/mt7620a_youku_yk1.dts deleted file mode 100644 index 2e59e5bf6e..0000000000 --- a/target/linux/ramips/dts/mt7620a_youku_yk1.dts +++ /dev/null @@ -1,129 +0,0 @@ -#include "mt7620a.dtsi" - -#include -#include - -/ { - compatible = "youku,yk1", "ralink,mt7620a-soc"; - model = "YOUKU YK1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - label-mac-device = ðernet; - }; - - leds { - compatible = "gpio-leds"; - - wlan { - label = "blue:wlan"; - gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - usb { - label = "blue:usb"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - led_power: power { - label = "blue:power"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <80000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x1fb0000>; - }; - }; - }; -}; - -&state_default { - default { - groups = "i2c", "rgmii1", "wled"; - function = "gpio"; - }; -}; - -ðernet { - pinctrl-names = "default"; - - mtd-mac-address = <&factory 0x28>; - - mediatek,portmap = "llllw"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0x0>; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index ddb09baa08..fe41512f36 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -1112,16 +1112,26 @@ define Device/xiaomi_miwifi-mini endef TARGET_DEVICES += xiaomi_miwifi-mini -define Device/youku_yk1 +define Device/youku_yk-l1 SOC := mt7620a IMAGE_SIZE := 32448k - DEVICE_VENDOR := YOUKU - DEVICE_MODEL := YK1 + DEVICE_VENDOR := Youku + DEVICE_MODEL := YK-L1 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \ kmod-usb-ledtrig-usbport - SUPPORTED_DEVICES += youku-yk1 + SUPPORTED_DEVICES += youku-yk1 youku,yk1 endef -TARGET_DEVICES += youku_yk1 +TARGET_DEVICES += youku_yk-l1 + +define Device/youku_yk-l1c + SOC := mt7620a + IMAGE_SIZE := 16064k + DEVICE_VENDOR := Youku + DEVICE_MODEL := YK-L1c + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \ + kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += youku_yk-l1c define Device/yukai_bocco SOC := mt7620a diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 17fa48c739..e2e2614483 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -215,7 +215,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "4:wan" "6@eth0" ;; - youku,yk1) + youku,yk-l1|\ + youku,yk-l1c) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "4:wan" "6@eth0" ;; @@ -338,7 +339,8 @@ ramips_setup_macs() lenovo,newifi-y1s|\ ohyeah,oy-0001|\ wavlink,wl-wn530hg4|\ - youku,yk1) + youku,yk-l1|\ + youku,yk-l1c) wan_mac=$(mtd_get_mac_binary factory 0x2e) ;; linksys,e1700)