From: Sven Roederer <devel-sven@geroedel.de>
Date: Fri, 5 May 2017 20:18:44 +0000 (+0200)
Subject: ramips: use GPIO_ACTIVE macros in UBNT-ERX.dts
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4c3953ba291abfb1d28b1452b6e519367bf4f242;p=openwrt%2Fstaging%2Faparcar.git

ramips: use GPIO_ACTIVE macros in UBNT-ERX.dts

- reorder includes
- use GPIO_ACTIVE_LOW macro instead of hardcoded "1"

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
---

diff --git a/target/linux/ramips/dts/UBNT-ERX.dts b/target/linux/ramips/dts/UBNT-ERX.dts
index 0b2da95b30..cf86bbb7e6 100644
--- a/target/linux/ramips/dts/UBNT-ERX.dts
+++ b/target/linux/ramips/dts/UBNT-ERX.dts
@@ -1,9 +1,10 @@
-#include <dt-bindings/input/input.h>
-
 /dts-v1/;
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
 	model = "UBNT-ERX";
 
@@ -24,7 +25,7 @@
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 12 1>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 	};