From: Alban Bedel <albeu@free.fr>
Date: Sat, 30 Apr 2022 08:42:33 +0000 (+0200)
Subject: ramips: zbt-wg2626: Add the reset gpio for PCIe port 1
X-Git-Tag: v22.03.0-rc2~59
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4c5d2cde130777cbc48765879c3a943eee9fe88e;p=openwrt%2Fopenwrt.git

ramips: zbt-wg2626: Add the reset gpio for PCIe port 1

The 2.4GHz interface doesn't come up properly with the log showing:

    mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)

As seen on other MT7621 boards this is caused by a missing reset GPIO.
The MT7621 dtsi set GPIO 19 as PCIe reset GPIO, which on this board
reset the 5GHz interface on port 0. Add GPIO 8 to the PCIe reset GPIO
list to also reset the 2.4GHz interface on port 1.

Signed-off-by: Alban Bedel <albeu@free.fr>
(cherry picked from commit f953a1a4bfba2fa70c12bb80938aa66481a673b6)
---

diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg2626.dts b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg2626.dts
index a1d6af9466..da22dc3797 100644
--- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg2626.dts
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg2626.dts
@@ -88,6 +88,9 @@
 
 &pcie {
 	status = "okay";
+
+	reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
+			<&gpio 8 GPIO_ACTIVE_LOW>;
 };
 
 &pcie0 {