From: Keith Maika Date: Mon, 16 Sep 2019 16:45:02 +0000 (-0400) Subject: ath79: add support for TP-Link Archer C59v2 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=4cb5f296255889dd5e6bf0124badd414e85d27f5;p=openwrt%2Fstaging%2Fblocktrron.git ath79: add support for TP-Link Archer C59v2 Add ath79 support for Archer C59v2, previously supported by ar71xx. TP-Link Archer C59v2 is a dual-band AC1350 router based on Qualcomm/Atheros QCA9561+QCA9886 chips. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - UART header on PCB Flash instruction: - via web UI: 1. Download openwrt-ath79-generic-tplink_archer-c59-v2-squashfs-factory.bin 2. Login to router and open the Advanced tab 3. Navigate to System Tools -> Firmware Upgrade 4. Upload firmware using the Manual Upgrade form - via TFTP: 1. Set PC to fixed ip address 192.168.0.66 2. Download openwrt-ath79-generic-tplink_archer-c59-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Keith Maika --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index e317ce26e1..778316e450 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -157,6 +157,7 @@ tplink,tl-wr842n-v3) ;; tplink,archer-c58-v1|\ tplink,archer-c59-v1|\ +tplink,archer-c59-v2|\ tplink,archer-c60-v1|\ tplink,archer-c60-v2) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 7d5f288536..5b47af8ef7 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -59,7 +59,8 @@ ath79_setup_interfaces() avm,fritz4020|\ pcs,cr3000|\ tplink,archer-c58-v1|\ - tplink,archer-c59-v1) + tplink,archer-c59-v1|\ + tplink,archer-c59-v2) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index ed3432273c..446b729a2b 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -214,6 +214,7 @@ case "$FIRMWARE" in ;; tplink,archer-c58-v1|\ tplink,archer-c59-v1|\ + tplink,archer-c59-v2|\ tplink,archer-c60-v1|\ tplink,archer-c60-v2|\ tplink,archer-c6-v2) diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts new file mode 100644 index 0000000000..e70afbffd9 --- /dev/null +++ b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9561_tplink_archer-c5x.dtsi" + +/ { + compatible = "tplink,archer-c59-v2", "qca,qca9560"; + model = "TP-Link Archer C59 v2"; +}; + +&leds { + usb { + label = "tp-link:green:usb"; + gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port>; + }; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "factory-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "u-boot"; + reg = <0x020000 0x010000>; + read-only; + }; + + mac: partition@30000 { + label = "mac"; + reg = <0x030000 0x010000>; + read-only; + }; + + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x040000 0xe10000>; + }; + + partition@e50000 { + label = "tplink"; + reg = <0xe50000 0x1a0000>; + read-only; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 1e63a6b2b4..5519e9c960 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -60,6 +60,18 @@ define Device/tplink_archer-c59-v1 endef TARGET_DEVICES += tplink_archer-c59-v1 +define Device/tplink_archer-c59-v2 + $(Device/tplink-safeloader-uimage) + ATH_SOC := qca9561 + IMAGE_SIZE := 14400k + DEVICE_MODEL := Archer C59 + DEVICE_VARIANT := v2 + TPLINK_BOARD_ID := ARCHER-C59-V2 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct + SUPPORTED_DEVICES += archer-c59-v2 +endef +TARGET_DEVICES += tplink_archer-c59-v2 + define Device/tplink_archer-c60-v1 $(Device/tplink-safeloader-uimage) ATH_SOC := qca9561